Related provisions for BIPRU 7.10.30B

1 - 8 of 8 items.

Search Term(s)

Filter by Topics

Filter by Modules

Filter by Documents

Filter by Keywords

Effective Period

Similar To

To access the FCA Handbook Archive choose a date between 1 January 2001 and 31 December 2004 (From field only).

BIPRU 7.10.1RRP
BIPRU 7.10 applies to a firm with a VaR model permission.
BIPRU 7.10.2GRP
BIPRU 7.10 provides details of when the appropriate regulator expects to allow a firm to use a VaR model (value at risk model) for the purpose of calculating part or all of its PRR. It introduces the concept of a VaR model, the methodology behind it and the link to the standard market risk PRR rules. It then goes on to detail the application and review process. The bulk of BIPRU 7.10 specifies the model standards and risk management standards that firms will be required to meet
BIPRU 7.10.3GRP
The models described in BIPRU 7.10 are described as VaR models in order to distinguish them from CAD 1 models, which are dealt with in BIPRU 7.9 (Use of a CAD 1 model). A VaR model is a risk management model which uses a statistical measure to predict profit and loss movement ranges with a confidence interval. From these results PRR charges can be calculated. The standards described in BIPRU 7.10, and which will be applied by the appropriate regulator, are based on 4Annex V of
BIPRU 7.10.4GRP
The aim of the VaR model approach is to enable a firm with adequate risk management systems to be subject to a PRR requirement that is more closely aligned with the risks to which it is subject than the PRR requirements generated by the standard market risk PRR rules. This provides a firm with an incentive to measure market risks as accurately and comprehensively as possible. It is crucial that those responsible for managing market risk at a firm should be aware of the assumptions
BIPRU 7.10.5GRP
There are a number of general methodologies for calculating PRR using a VaR model. The appropriate regulator does not prescribe any one method of computing VaR measures. Moreover, it does not wish to discourage any firm from developing alternative risk measurement techniques. A firm should discuss the use of any alternative techniques used to calculate PRR with the appropriate regulator.
BIPRU 7.10.6GRP
A firm should not use the VaR model approach to calculate PRR unless it has a VaR model permission. If a firm does not have such a permission it should use the standard market risk PRR rules. Therefore, a firm needs to apply for a VaR model permission in order to calculate its PRR using a VaR model instead of (or in combination with) the standard market risk PRR rules.
BIPRU 7.10.7GRP
A waiver or other permission allowing the use of models in the calculation of PRR will be considered with regards to CAD and any VaR model permission which is granted will be considered with regards to CAD.4 Accordingly, the appropriate regulator is likely only to grant a waiver or other permission allowing the use of models in the calculation of PRR if it is a VaR model permission or a CAD 1 model waiver.
BIPRU 7.10.8GRP
BIPRU 7.10 sets out the minimum standards that the appropriate regulator expects firms to meet before granting a VaR model permission. The appropriate regulator will not grant a VaR model permission unless it is satisfied that the requirements of BIPRU 7.10 are met and it is satisfied about the procedures in place at a firm to calculate the model PRR. In particular the appropriate regulator will not normally grant a VaR model permission unless it is satisfied about the quality
BIPRU 7.10.9GRP
The appropriate regulator recognises that the nature of VaR models will vary between firms. The scope of and the requirements and conditions set out in a VaR model permission may therefore differ in substance or detail from BIPRU 7.10 in order to address individual circumstances adequately. The FCA will consider any differences by having regard to the CAD.4 A VaR model permission will implement any such variation by modifying BIPRU 7.10. A VaR model permission may also include
BIPRU 7.10.10GRP
Details of the general process for applying for a VaR model permission are set out in BIPRU 1.3 (Applications for advanced approaches). Because of the complexity of a VaR model permission, it is recommended that a firm discuss its proposed application with its usual contact at the appropriate regulator before it makes the application.
BIPRU 7.10.11GRP
In order for a VaR model permission to be granted, the appropriate regulator is likely to undertake a review to ensure that it is adequate and appropriate for the PRR calculation.
BIPRU 7.10.12GRP
The VaR model review process may be conducted through a series of visits covering various aspects of a firm's control and IT environment. Before these visits the appropriate regulator may ask the firm to provide some information relating to the firm'sVaR model permission request accompanied by some specified background material. The VaR model review visits are organised on a timetable that allows the firm being visited sufficient time to arrange the visit and provide the appropriate
BIPRU 7.10.13GRP
As part of the process for dealing with an application for a VaR model permission the following may be reviewed: organisational structure and personnel; details of the firm's market position in the relevant products; revenue and risk information; valuation and reserving policies; operational controls; information technology systems; model release and control procedures; risk management and control framework; risk appetite and limit structure; future developments relevant to model
BIPRU 7.10.15GRP
The appropriate regulator may complement its own review of a VaR model permission request with one or more reviews by a skilled person under section 166 of the Act (Reports by skilled persons). Such a review may also be used where a VaR model permission has been granted to ensure that the requirements BIPRU 7.10 and of the VaR model permission continue to be met.
BIPRU 7.10.16GRP
Where a VaR model used outside the United Kingdom differs from that used in the United Kingdom the appropriate regulator may request details of the reasons for using different models.
BIPRU 7.10.17GRP
Where a firm operates any part of its VaR model outside the United Kingdom, the appropriate regulator may take into account the results of the home supervisor's review of that model. The appropriate regulator may wish to receive information directly from the home supervisor.
BIPRU 7.10.18RRP
A firm must use the VaR model approach to calculate the PRR for a position:(1) to the extent that the risks in relation to that position are within the scope of the VaR model permission (see BIPRU 7.10.136R (Link to standard PRR rules: Incorporation of the model output into the capital calculation)); and(2) if the position is of a type that comes within the scope of the VaR model permission.
BIPRU 7.10.19GRP
In accordance with BIPRU 7.10.18R (1) a VaR model permission will set out the risk categories that it covers, which are expected to be one or more of the following types:(1) interest rate general market risk;(2) interest rate specific risk (in conjunction with interest rate general market risk);(3) equitygeneral market risk;(4) equityspecific risk (in conjunction with equitygeneral market risk);(5) CIU risk;(6) foreign currency risk; and(7) commodity risk.
BIPRU 7.10.20GRP
A VaR model permission will generally set out the broad classes of position within its scope. It may also specify how individual products within one of those broad classes may be brought into or taken out of the scope of the VaR model permission.
BIPRU 7.10.22GRP
The categorisation described in BIPRU 7.10.21G may be amended or replaced in the case of a particular firm'sVaR model permission.
BIPRU 7.10.23GRP
It is the appropriate regulator's view that, where a firm uses a VaR model for one risk category as described in BIPRU 7.10.19G, it is good practice to extend its model over time to calculate all of its PRR risk categories. A firm will typically be expected to have a realistic plan in place to do this.
BIPRU 7.10.25GRP
The appropriate regulator accepts that the scope and nature of VaR models varies across firms. This means that different firms are likely to calculate different estimates of market risk for the same portfolio. Systematic differences are due to length of data series, choice of methodology (historical or Monte Carlo simulation or variance-covariance method or a hybrid of these), differences in aggregating risks within and across broad risk factors, the treatment of options and other
BIPRU 7.10.27ARRP
3Stressed VaR must be calculated at least weekly, using a 99% one-tailed confidence limit.
BIPRU 7.10.28RRP
In calculating the VaR number, a firm must either use a ten business day holding period, or use a holding period converted to a ten business day holding period. However if the firm'sVaR model permission specifies that the firm must use a specific method, the firm must do so.
BIPRU 7.10.29GRP
If a firm uses a holding period other than 10 business days and converts the resulting VaR measure to a ten business day equivalent measure, it should be able to justify the choice of conversion technique. For example, the square root of time method will usually be justifiable. The appropriate regulator considers it good practice ultimately to move towards the application of an actual ten business day holding period, rather than using different holding periods.
BIPRU 7.10.30RRP
Subject to BIPRU 7.10.31R, the calculation of VaR numbers must be based on an effective historical observation period that is the longest possible consistent with a prudent VaR number. That period must be at least one year or such longer period as may be set out in the firm'sVaR model permission. However if using that prescribed observation period does not result in a sufficiently prudent way of calculating a VaR measure or a component of a VaR measure the firm must shorten this
BIPRU 7.10.30ARRP
3The stressed VaR measure must be based on inputs calibrated to historical data from a continuous twelve-month period of significant financial stress relevant to the firm's portfolio. The choice of that historical period will be subject to the appropriate regulator's approval and will form part of a firm'sVaR model permission.
BIPRU 7.10.31RRP
A firm must ensure that the data series used by its VaR model is reliable. Where a reliable data series is not available, proxies or any other reasonable value-at-risk measurement technique must be used. A firm must be able to demonstrate that the technique is appropriate and does not materially understate the modelled risks.
BIPRU 7.10.32GRP
A data series is unreliable if it has, for example, missing data points, or data points which contain stale data. Reliable data series may be difficult to obtain for new products (for example an instrument of longer dated tenor that did not previously trade) and for less liquid risk factors or positions. With regard to less liquid risk factors or positions, a firm may use a combination of prudent valuation techniques and alternative VaR estimation techniques to ensure there is
BIPRU 7.10.33RRP
(1) If a weighting scheme or other similar method is used to calculate VaR numbers, then the effective observation period must be at least one year. Where a weighting scheme is used, the weighted average time lag of the individual observations must not be less than six Months.(2) If a specific observation period or weighted average time lag is specified in a firm'sVaR model permission, the firm must comply with that if it is longer than the period specified in (1).(3) However,
BIPRU 7.10.34RRP
A firm must update data sets in accordance with the frequency set out in its VaR model permission. If volatility in market prices or rates necessitates more frequent updating in order to ensure a prudent calculation of the VaR measure the firm must do so.
BIPRU 7.10.35GRP
The minimum updating frequency for the current VaR measure3 that can be specified in a VaR model permission is monthly.33
BIPRU 7.10.36RRP
The process for determining and implementing correlations within and across risk categories must be sound, implemented with integrity and consistent with the terms of the firm'sVaR model permission.
BIPRU 7.10.37RRP
In aggregating VaR measures across risk or product categories, a firm must not use the square root of the sum of the squares approach unless the assumption of zero correlation between these categories is empirically justified. If correlations between risk categories are not empirically justified, the VaR measures for each category must simply be added in order to determine its aggregate VaR measure. But to the extent that a firm'sVaR model permission provides for a different way
BIPRU 7.10.38GRP
Subject to BIPRU 7.10.53R (Model standards: Materiality), a VaR model should capture and accurately reflect all material risks arising on the underlying portfolio on a continuing basis insofar as those risks are within the scope of the VaR model permission. This should encompass general market risk and, to the extent that this comes within the scope of the VaR model permission, specific risk. A firm should ensure that the VaR model has sufficient risk factor granularity to be
BIPRU 7.10.39RRP
In the case of general market risk and risks with respect to which the standard market risk PRR rules do not distinguish between general market risk and specific risk, a firm'sVaR model must capture a sufficient number of risk factors in relation to the level of activity of the firm and in particular the risks set out in BIPRU 7.10.40R - BIPRU 7.10.44R.
BIPRU 7.10.39ARRP
3A firm must incorporate risk factors that are included in its pricing model in its VaR model. A firm'sVaR model must capture nonlinearities for options and other products, as well as correlation risk and basis risk. Where proxies for risk factors are used they must show a good track record for the actual position held. In addition, BIPRU 7.10.40 R to BIPRU 7.10.44 R apply for individual risk types.
BIPRU 7.10.39BRRP
3A firm with a VaR model permission must justify to the appropriate regulator any omissions of risk factors from its VaR model, if they are included in its pricing model.
BIPRU 7.10.40RRP
For interest rate risk, a VaR model must incorporate a set of risk factors corresponding to the interest rate curves in each currency in which the firm has interest rate sensitive positions. A firm must ensure that it captures the variations of volatility of rates along the yield curve. In order to achieve this, a firm must divide the yield curves of, at a minimum, the major currencies and markets in which it has material interest rate exposures into a minimum of six maturity
BIPRU 7.10.41RRP
For equity risk, a VaR model must use a separate risk factor at least for each of the equity markets in which the firm has material positions.
BIPRU 7.10.42RRP
For foreign currency risk, a VaR model must incorporate risk factors corresponding to the individual foreign currencies, including gold, in which the firm'spositions are denominated.
BIPRU 7.10.43RRP
For commodity risk, the VaR model must use a separate risk factor at least for each commodity in which the firm has material positions. The VaR model must also capture the risk of less than perfectly correlated movements between similar, but not identical, commodities and the exposure to changes in forward prices arising from maturity mismatches. It must also take account of market characteristics, notably delivery dates and the scope provided to traders to close out position
BIPRU 7.10.45GRP
(1) This paragraph contains guidance on the inclusion of CIUs in a VaR model.(2) The appropriate regulator may allow all types of CIU to be included within the scope of a firm'sVaR model permission.(3) BIPRU 7.10 does not distinguish between specific risk and general market risk for positions in CIUs. Therefore even if specific risk is not otherwise included within the scope of a firm'sVaR model permission, a firm should be able to demonstrate that its VaR model captures specific
BIPRU 7.10.46RRP
(1) If a firm'sVaR model covers the calculation of PRR with respect to specific risk the firm must meet the VaR specific risk minimum requirements in addition to the other requirements of BIPRU 7.10.(2) The VaR model must explain the historical price variation in the portfolios concerned.(3) The VaR model must capture concentration in terms of magnitude and changes of composition of the portfolios concerned.(4) The VaR model must be robust to an adverse environment.(5) The VaR
BIPRU 7.10.47GRP
This paragraph provides guidance onBIPRU 7.10.46 R (2). Take as an example a VaR model based on a factor model or on a historical simulation model. The ability of the model to explain price variation could be demonstrated by a statistical comparison over the same period of time between actual price changes on the portfolio and the profit and loss impact of risk factors included within the model. A firm may wish to include an estimate of residual variation not explained by the
BIPRU 7.10.48RRP
(1) [deleted]33(2) A firm'sVaR model must conservatively assess the risk arising from less liquid positions and positions with limited price transparency under realistic market scenarios. In addition, the VaR model must meet minimum data standards. Proxies must be appropriately conservative and may be used only where available data is insufficient or is not reflective of the true volatility of a position or portfolio.
BIPRU 7.10.53RRP
A firm'sVaR model must capture accurately all material price risks for positions within the scope of its VaRpermission, including risks relating to options or option-like positions. The firm must ensure that, if its VaR model does not accurately capture any material risk, the firm has capital resources adequate to cover that risk. These capital resources must be additional to those required to meet its capital resources requirement.
BIPRU 7.10.54GRP
For example, BIPRU 7.10.53R might involve creating and documenting a prudent incremental PRR charge for the risk not captured in the VaR model and holding sufficient capital resources against this risk. In that case the firm should hold capital resources at least equal to its capital resources requirement as increased by adding this incremental charge to the model PRR. Alternatively the firm may make valuation adjustments through its profit and loss reserves to cover this material
BIPRU 7.10.55BRRP
3The incremental risk charge must cover all positions which are subject to a capital charge for interest-rate specific risk in accordance with the firm'sVaR model permission, except securitisationpositions and nth-to-default credit derivatives. Where permitted by its VaR model permission, a firm may choose consistently to include all listed equity positions and derivativespositions based on listed equities for which that inclusion is consistent with how the firm internally measures
BIPRU 7.10.55TRRP
3As part of its VaR model permission, the appropriate regulator may authorise a firm to use the all price risk measure to calculate an additional capital charge in relation to positions in its correlation trading portfolio if it meets the following minimum standards:(1) it adequately captures all price risks at a 99.9% confidence interval over a capital horizon of one year under the assumption of a constant level of risk, and adjusted, where appropriate, to reflect the impact
BIPRU 7.10.57GRP
A firm should be able to demonstrate that it meets the risk management standards set out in the VaR model permission on a legal entity basis. This is particularly important for a subsidiary undertaking in a group subject to matrix management where the business lines cut across legal entity boundaries.
BIPRU 7.10.58RRP
A firm must have a conceptually sound risk management system surrounding the use of its VaR model that is implemented with integrity and that in particular meet the qualitative standards set out in BIPRU 7.10.59R - BIPRU 7.10.82R.
BIPRU 7.10.59RRP
A firm must base its model PRR calculation on the output of the VaR model which is used for its internal risk management rather than one developed specifically to calculate its PRR.
BIPRU 7.10.60RRP
The VaR model must be fully integrated into the daily risk management process of the firm, and serve as the basis for reporting risk exposures to senior management of the firm.
BIPRU 7.10.61GRP
A firm'sVaR model output should be an integral part of the process of planning, monitoring and controlling a firm'smarket risk profile. The VaR model should be used in conjunction with internal trading and exposure limits. The links between these limits and the VaR model should be consistent over time and understood by senior management. The firm should regard risk control as an essential aspect of the business to which significant resources need to be devoted.
BIPRU 7.10.62RRP
A firm must have a risk control unit which is independent from business trading units and which reports directly to senior management. It:(1) must be responsible for designing and implementing the firm's risk management system;(2) must produce and analyse daily reports on the output of the VaR model and on the appropriate measures to be taken in terms of the trading limits; and(3) conduct the initial and on-going validation of the VaR model.
BIPRU 7.10.64GRP
It is the responsibility of a firm's own management to ensure the accuracy and integrity of its VaR model. This responsibility includes obtaining appropriate independent validation of the VaR model.
BIPRU 7.10.66RRP
A firm must establish, document and maintain policies, controls and procedures to an auditable standard:(1) concerning the operation of its VaR model approach; and(2) for monitoring and ensuring compliance with the policies, controls and procedures in (1).
BIPRU 7.10.67RRP
A VaR model must be adequately documented.
BIPRU 7.10.68GRP
(1) An example of documents required by BIPRU 7.10.67R may be a manual that describes the basic principles of the risk management framework, clearly setting out empirical techniques, principles and assumptions used within it.(2) This documentation should be of sufficient detail for the appropriate regulator to be able to develop a clear understanding of how the VaR model works from that documentation on its own.
BIPRU 7.10.69RRP
A firm'sVaR model must have a proven track record of acceptable accuracy in measuring risk.
BIPRU 7.10.72RRP
(1) A firm must frequently conduct a rigorous programme of stress testing. The results of these tests must be reviewed by senior management and reflected in the policies and limits the firm sets.(2) The programme must particularly address:(a) concentration risk;(b) illiquidity of markets in stressed market conditions;(c) one way markets;(d) event and jump to default risks;(e) non linearity of products;(f) deep out of the money positions;(g) positions subject to the gapping of
BIPRU 7.10.75RRP
At least once a year, a firm must conduct, as part of its regular internal audit process, a review of its risk management process. This review must include both the activities of the business trading units and of the independent risk control unit, and must be undertaken by suitably qualified staff independent of the areas being reviewed. This review must consider, at a minimum:(1) the adequacy of the documentation of the risk management system and process;(2) the organisation
BIPRU 7.10.76GRP
The appropriate regulator will require a period of initial monitoring or live testing before a VaR model can be recognised. This will be agreed on a firm by firm basis.
BIPRU 7.10.77GRP
In assessing the firm'sVaR model and risk management, the appropriate regulator has regard to the results of internal model validation procedures used by the firm to assess the VaR model.
BIPRU 7.10.78RRP
A firm must have processes in place to ensure that its VaR model has been adequately validated by suitably qualified parties independent of the development process to ensure that it is conceptually sound and adequately captures all material risks. This validation must be conducted when the VaR model is initially developed and when any significant changes are made to the VaR model. The validation must also be conducted on a periodic basis but especially where there have been any
BIPRU 7.10.79GRP
(1) In addition to regulatory backtesting programs, testing for model validation should be carried out using additional tests which may include for example:(a) testing carried out using hypothetical changes in portfolio value that would occur were end of day positions to remain unchanged;(b) testing carried out for longer periods than required for the regular backtesting programme (for example, 3 years);(c) testing carried out using confidence intervals other than the 99 percent
BIPRU 7.10.81GRP
In assessing whether the VaR model is implemented with integrity as described in BIPRU 7.10.58R (Stress testing), the appropriate regulator will consider in particular the information technology systems used to run the model and associated calculations. The assessment may include:(1) feeder systems; risk aggregation systems; time series databases; the VaR model system; stress testing system; the backtesting system including profit and loss cleaning systems where appropriate; data
BIPRU 7.10.82RRP
A firm must ensure that it has adequate controls relating to:(1) the derivation of the model PRR;(2) the integrity of the backtesting programme, including the calculation of the profit and loss account;(3) the integrity and appropriateness of the VaR model, including the VaR model's geographic coverage and the completeness of data sources;(4) the VaR model's initial and ongoing development, including independent validation;(5) the valuation models, including independent validation;
BIPRU 7.10.87RRP
A firm must periodically and actively identify all the worst case scenarios that are relevant to its portfolio. Scenarios used must be appropriate to test the effect of adverse movements in market volatilities and correlations and the effect of any change in the assumptions underlying the VaR model. Scenarios involving low probability market events must nevertheless be plausible.
BIPRU 7.10.91GRP
Backtesting is the process of comparing value-at-risk risk measures to portfolio performance. It is intended to act as one of the mechanisms for the ongoing validation of a firm'sVaR model and to provide incentives for firms to improve their VaR measures.
BIPRU 7.10.92GRP
It is a condition for granting a VaR model permission that a firm should have a backtesting programme in place and should provide three months of backtesting history.
BIPRU 7.10.93GRP
Backtesting conducted only at a whole portfolio level using a single measure of profit and loss has limited power to distinguish an accurate VaR model from an inaccurate one. Backtesting should therefore be regarded as an additional safeguard rather than a primary validation tool. Such testing does however form the basis of the appropriate regulator'splus factor system. The test has been chosen as the basis of the backtesting regime because of its simplicity. A firm will therefore
BIPRU 7.10.94RRP
A firm must have the capacity to analyse and compare its profit and loss figures3 and hypothetical profit and loss figures3 to the VaR measure, both at the level of the whole portfolio covered by the VaR model permission and at the level of individual books that contain material amounts of risk.33
BIPRU 7.10.96RRP
At a minimum, a3firm must, on each business day, compare each of its 250 most recent business days'hypothetical profit and loss figures3 (ending with the business day preceding the business day in question) with the corresponding one-day VaR measures.33
BIPRU 7.10.97GRP
Generally the positions underlying the profit and loss account and VaR measures should not be materially different.
BIPRU 7.10.98RRP
The one-day VaR measure for a particular business day is the VaR number for that business day calibrated to a one business day holding period and a 99% one-tailed confidence level.
BIPRU 7.10.99GRP
The ultimate purpose of backtesting is to assess whether capital is sufficient to absorb actual losses. Actual daily profit and loss means the day's profit and loss arising from trading activities within the scope of the VaR model permission. This measure should, however, be 'cleaned' using BIPRU 7.10.100R inclusion in profit and loss of non-modelled factors.3
BIPRU 7.10.100RRP
The profit and loss figure3 for a particular business day is the firm's actual profit or loss for that day in respect of the trading activities within the scope of the firm'sVaR model permission, adjusted by stripping out:3(1) fees and commissions;(2) brokerage;(3) additions to and releases from reserves which are not directly related to market risk (e.g. administration reserves); and(4) any inception profit exceeding an amount specified for this purpose in the firm'sVaR model
BIPRU 7.10.101GRP
The definition of profit and loss figure may be amended or replaced in an individual VaR model permission if the firm can demonstrate to the appropriate regulator that the alternative method meets the spirit and purpose of the provisions in BIPRU 7.10 about the profit and loss figure.33
BIPRU 7.10.102GRP
The appropriate regulator will review as part of a firm'sVaR model permission application the processes and documentation relating to the derivation of profit and loss used for backtesting. A firm's documentation should clearly set out the basis for cleaning profit and loss. To the extent that certain profit and loss elements are not updated every day (for example certain reserve calculations) the documentation should clearly set out how such elements are included in the profit
BIPRU 7.10.103RRP
A backtesting exception is deemed to have occurred for any business day if the hypothetical profit and loss figure3 for that business day shows a loss, which in absolute magnitude, exceeds the one-day VaR measure for that business day. The only exception is if that business day is identified in the firm'sVaR model permission as giving rise to an excluded backtesting exception.3
BIPRU 7.10.104RRP
If a backtesting exception occurs, the firm must notify its usual supervisory contact at the appropriate regulator orally by close of business two business days after the business day for which the backtesting exception occurred. Within five business days following the end of each Month, the firm must submit to the appropriate regulator a written account of the previous Month'sbacktesting exceptions (if any). This explanation must include the causes of the backtesting exceptions,
BIPRU 7.10.105GRP
(1) This paragraph gives guidance on the backtesting calculation and reporting process in BIPRU 7.10.96R - BIPRU 7.10.104R.(2) Let the day on which the loss referred to in BIPRU 7.10.100R is made be day n. The value-at-risk measure for that day will be calculated on day n-1, or overnight between day n-1 and day n. Profit and loss figures are produced on day n+1, and backtesting also takes place on day n+1. The firm's supervisor should be notified of any backtesting exceptions
BIPRU 7.10.106GRP
(1) This paragraph gives guidance on the process for excluding backtesting exceptions as referred to in BIPRU 7.10.103R.(2) The appropriate regulator will respond flexibly to backtesting exceptions. However, the appropriate regulator's starting assumption will be that a backtesting exception should be taken into account for the purpose of the calculation of plus factors. If the firm believes that a backtesting exception should not count for that purpose, then it should seek a
BIPRU 7.10.107RRP
If a firm'sVaR model permission covers specific risk, the firm must validate its VaR model through backtesting aimed at assessing whether specific risk is being accurately captured. This backtesting must be carried out in accordance with the provisions of its VaR model permission. If the VaR model permission provides for this backtesting to be performed on the basis of relevant sub-portfolios, these must be chosen in a consistent manner.
BIPRU 7.10.108GRP
Specific risk backtesting involves the backtesting of a standalone specific riskVaR measure against a profit and loss series determined by reference to exposure risk factors categorised as specific risk. Alternatively specific risk backtesting may take the form of regular backtesting of trading books and portfolios that are predominantly exposed to risk factors categorised as specific risk. The precise requirements for specific risk backtesting will be specified in the firm'sVaR
BIPRU 7.10.110GRP
Where backtesting reveals severe problems with the basic integrity of the VaR model, the appropriate regulator may withdraw model recognition. In particular, if ten or more backtesting exceptions are recorded in a 250 business day period, the appropriate regulator may apply a plus factor greater than one or the appropriate regulator may consider revoking a firm'sVaR model permission. The appropriate regulator may also consider revoking a firm'sVaR model permission if ten or more
BIPRU 7.10.111RRP
A firm must perform backtesting against a hypothetical profit and loss figure3 with respect to each business day. A hypothetical profit and loss figure3 for a business day means the hypothetical profit and loss figure3 that would have occurred for that business day if the portfolio on which the VaR number for that business day is based remained unchanged.3333
BIPRU 7.10.112GRP
(1) A hypothetical profit and loss figure3 is based on the day's change in the value of the same portfolio that was used to generate the value-at-risk forecast.3(2) [deleted]33(3) The firm may also need to calculate a hypothetical profit and loss figure3 in order to produce profit attribution reports and to analyse the cause of backtesting exceptions.3
BIPRU 7.10.112AGRP
3The definition of hypothetical profit and loss figure may be amended or replaced in an individual VaR model permission if the firm can demonstrate to the appropriate regulator that the alternative method meets the spirit and purpose of the provisions in BIPRU 7.10 about the hypothetical profit and loss figure.
BIPRU 7.10.113RRP
The model PRR is, for any business day (the "relevant" business day), calculated in accordance with the following formula:(1) the higher of:(a) the VaR number for the relevant business day; and(b) the average of its daily VaR numbers for each of the 60 business days ending with the relevant business day, multiplied by the multiplication factor for the relevant business day; and(2) (in the case of a VaR model permission that covers specific risk) the higher of:33(a) the incremental
BIPRU 7.10.115RRP
The VaR number for any business day means the VaR measure, in respect of the previous business day's close-of-business positions in products coming within the scope of the VaR model permission, calculated by the VaR model and in accordance with BIPRU 7.10 and any methodology set out in the VaR model permission. The VaR number must not be calculated taking into account matters on the business day for which it is the VaR number.
BIPRU 7.10.117GRP
The following equation expresses BIPRU 7.10.113R mathematically:where:(1) PRRVaris a firm'smodel PRR;(2) VaRt represents the previous day's value-at-risk figure;(3) VaRt-i represents the value-at-risk calculated for ibusiness days earlier;(4) f is the multiplication factor for VaR3;3(5) SVARt represents the latest stressed VaR figure;33(6) SVARt-i represents the stressed VaR calculated for ibusiness days earlier;3(7) s is the multiplication factor for stressed VaR;3(8) y is the
BIPRU 7.10.118RRP
The multiplication factor, for VaR and stressed VaR,3 for any business day is the sum of the minimum multiplication factor and the plus factor for that day.
BIPRU 7.10.119RRP
The minimum multiplication factor, for VaR and stressed VaR,3 is three or any higher amount the VaR model permission defines it as.
BIPRU 7.10.120GRP
The minimum multiplication factor, for VaR and stressed VaR,3 will never be less than three. If the appropriate regulator does set the minimum multiplication factor, for VaR and stressed VaR,3 above three the VaR model permission will have a table that sets out the reasons for that add on and specify how much of the add on is attributable to each reason (see BIPRU 7.10.121R). If there are weaknesses in the VaR model that may otherwise be considered a breach of the minimum standards
BIPRU 7.10.121RRP
Something that would otherwise be a breach of the minimum standards in BIPRU 7.10.26R - BIPRU 7.10.53R is not a breach to the extent that that thing is identified in the firm'sVaRpermission as a reason for an increase in the minimum multiplication factor, for VaR and stressed VaR,3 above 3.3
BIPRU 7.10.122GRP
Typically, any add on will be due to a specific weakness in systems and controls identified during the appropriate regulator's review that the appropriate regulator does not consider material enough to justify withholding overall model recognition. The firm will be expected to take action to address the reasons for any add on. The appropriate regulator will then review these periodically and, where satisfactory action has been taken, the add on will be removed through a variation
BIPRU 7.10.123GRP
The plus factor system is designed so that the more often a VaR model has under-predicted losses in the past, the higher should be the capital requirement based on the VaR model. It is intended to provide a capital incentive for the firm to continue to improve the accuracy of its VaR model.
BIPRU 7.10.124RRP
The table in BIPRU 7.10.125R sets out the plus factors to be added to the minimum multiplication factor, for VaR and stressed VaR,3 for any business day. It is based on the number of backtesting exceptions that occurred during the backtesting period as referred to in BIPRU 7.10.96R (Backtesting: Basic testing requirements) ending three business days preceding the business day for which the model PRR is being calculated.
BIPRU 7.10.126GRP
A VaR model that correctly predicts a one-tailed 99% confidence level is expected to produce, on average, 2.5 backtesting exceptions every 250 days. Random events may cause the number of backtesting exceptions actually observed to vary. The plus factor system is designed to take this into account. Hence plus factors are only imposed on the firm if it has five or more recorded backtesting exceptions. Therefore, where a backtesting exception appears to be caused simply by chance,
BIPRU 7.10.128GRP
A VaR model permission will contain requirements for what the firm should report to the appropriate regulator and the procedures for reporting. The precise requirements will vary from VaR model permission to VaR model permission. BIPRU 7.10.129R-BIPRU 7.10.130R set out what the appropriate regulator regards as the standard requirements.
BIPRU 7.10.129RRP
A firm must, no later than the number of business days after the end of each quarter specified in the VaR model permission for this purpose, submit, in respect of that quarter, a report to the appropriate regulator about the operation of the VaR model, the systems and controls relating to it and any changes to the VaR model and those systems and controls. Each report must outline as a minimum the following information in respect of that quarter:(1) methodological changes and developments
BIPRU 7.10.130RRP
A firm must provide to, and discuss with, the appropriate regulator details of any significant planned changes to the VaR model before those changes are implemented. These details must include information about the nature of the change and an estimate of the impact on VaR numbers and the incremental risk charge.33
BIPRU 7.10.131GRP
The VaR model permission will generally contain a list of the following:(1) feeder systems and pre-processing systems;(2) products covered by the VaR model permission; and(3) the firm's internal documentation in relation to the VaR model.
BIPRU 7.10.132GRP
The information in BIPRU 7.10.131G will vary over time. It is therefore not included in a VaR model permission as a rule but for information only. The appropriate regulator will update that information regularly in accordance with information supplied under BIPRU 7.10.129R. That updating will not amount to a variation of the VaR model permission.
BIPRU 7.10.133GRP
A VaR model permission will modify GENPRU 2.1.52 R (Calculation of the market risk capital requirement) to provide that a firm should calculate its market risk capital requirement in accordance with BIPRU 7.10 to the extent set out in the VaR model permission.
BIPRU 7.10.134GRP
By modifying GENPRU 2.1.52 R (Calculation of the market risk capital requirement) to allow the firm to use the VaR model to calculate all or part of its PRR for certain positions, the appropriate regulator is treating it like an application rule. The modification means that the PRR calculation set out in BIPRU 7.10 supersedes the standard market risk PRR rules for products and risks coming within the scope of the VaR model permission.
BIPRU 7.10.135RRP
To the extent that a position does not fall within the scope of a firm'sVaR model permission the firm must calculate the PRR under the standard market risk PRR rules1 or, as applicable, those provisions as modified by the firm'sCAD 1waiver.
BIPRU 7.10.136RRP
(1) This rule applies to a position of a type that comes within the scope of a firm'sVaR model permission.(2) Subject to BIPRU 7.10.136A R, if, 3where the standard market risk PRR rules apply, a position is subject to a PRR charge and the firm'sVaR model permission says that it covers the risks to which that PRR charge relates, the firm must, for those risks, calculate the PRR for that position under the VaR model approach rather than under the standard market risk PRR rules.3(3)
BIPRU 7.10.137RRP
A firm may exclude from the VaR model approach immaterial risks within the scope of its VaR model approach. If a firm does so it must instead apply the standard market risk PRR rules to those risks.
BIPRU 7.10.138RRP
(1) If a firm calculates its market risk capital requirement using a combination of the standard market risk PRR rules and either the VaR model approach or the VaR model approach with the CAD 1 model approach the PRR from each method must be added together.(2) A firm must take appropriate steps to ensure that all of the approaches are applied in a consistent manner.
BIPRU 7.10.139GRP
An example of the effect of BIPRU 7.10.138R is that where a firm normally calculates the PRR for a particular portfolio using a VaR model, a firm should not switch to the standard market risk PRR rules purely to achieve a more attractive PRR.
BIPRU 7.10.140RRP
If:(1) the standard market risk PRR rules provide for a choice of which of the PRR charges to use or specify that one type must be used in some circumstances and that another type must be used in other circumstances;(2) one of those types is disapplied under BIPRU 7.10.136R; and(3) the other type is not disapplied;the firm:(4) must use the VaR model approach if under the standard market risk PRR rules the firm must use the standard market risk PRR rules in (2); and(5) may use
BIPRU 7.10.141GRP
The treatment of a convertible is an example of a situation in which BIPRU 7.10.140R applies. The table in BIPRU 7.3.3R (Table: Instruments which result in notional positions) shows that there are circumstances in which under the standard market risk PRR rules a firm should calculate an equity PRR and that there are circumstances in which a firm may choose between calculating an equity PRR and an interest rate PRR. BIPRU 7.10.140R would be relevant if a firm'sVaR model permission
BIPRU 7.10.142RRP
The standard market risk PRR rules for the option PRR are only disapplied to the extent that the derived positions arising under BIPRU 7.6.13R (Table: Derived positions) come within the scope of the VaR model permission.
BIPRU 7.10.143RRP
If a firm'sVaR model permission covers interest rate general market risk but not interest rate specific risk, the firm must calculate the interest rate PRR so far as it relates to interest rate specific risk in accordance with the standard market risk PRR rules except that the firm must not use the basic interest rate PRR calculation in BIPRU 7.3.45R (Basic interest rate calculation for equity instruments).
BIPRU 7.10.144RRP
If a firm'sVaR model permission covers equitygeneral market risk but not equityspecific risk, the firm must calculate the equity PRR so far as it relates to equityspecific risk in accordance with the standard market risk PRR rules except that the PRR for equityspecific risk must be calculated under the standard equity method.
BIPRU 7.10.145RRP
(1) To the extent that a firm'sVaR model permission does not allow it to use an approach set out in BIPRU 7.10 the relevant provisions in BIPRU 7.10 do not apply to that firm.(2) If a provision of the Handbook refers to BIPRU 7.10, that reference must, in the case of a particular firm with a VaR model permission, be treated as excluding provisions of BIPRU 7.10 that do not apply under the VaR model permission and as taking into account any modifications to BIPRU 7.10 made by the
BIPRU 7.10.146RRP
A VaR model must be a value-at-risk model. It must provide an estimate of the worst expected loss on a portfolio resulting from market movements over a period of time with the specified confidence level.
BIPRU 7.10.147GRP
If a firm ceases to meet any of the requirements set out in BIPRU 7.10, the appropriate regulator's policy is that the VaR model permission should cease to have effect. In part this will be achieved by making it a condition of a firm'sVaR model permission that it complies at all times with the minimum standards referred to in BIPRU 7.10.26R - BIPRU 7.10.53R. Even if they are not formally included as conditions, the appropriate regulator is likely to consider revoking the VaR model
BIPRU 7.10.148RRP
If a firm ceases to meet the conditions or requirements in its VaR model permission or BIPRU 7.10 it must notify the appropriate regulator at once.
BIPRU 7.10.149RRP
A firm may change its VaR model to such extent as it sees fit, except that it must not make a change that (either on its own or together with other changes since the date of VaR model permission) would:(1) be inconsistent with VaR model permission or BIPRU 7.10; or(2) mean that backtesting in accordance with BIPRU 7.10 and the VaR model permission would result in the use of data that is inappropriate for the purposes of measuring the performance of the VaR model.
SUP 16.12.11RRP

The applicable data items referred to in SUP 16.12.4 R are set out according to firm type in the table below:

89Description of data item

Firms’prudential category and applicable data items (note 1)

MIFIDPRU investment firms

Firms other than MIFIDPRU investment firms

IPRU(INV)Chapter 3

IPRU(INV)Chapter 5

91

IPRU(INV)Chapter 13

Solvency statement

No standard format (note 4)

No standard format (note 6)

No standard format (note 4)

Balance sheet

FSA029

(note 2)

FSA029

(note 5)

FSA029

91

Section A RMAR

Income statement

FSA030

(note 2)

FSA030

(note 5)

FSA030

91

Section B RMAR

Capital adequacy

MIF001

(note 2 and 3)

FSA033

(note 5)

FSA034 or FSA035 or FIN071

(note 7)

91

Section D1 RMAR

Supplementary capital data for collective portfolio management investment firms

FIN067

(note 13)

ICARA assessment questionnaire

MIF007

(note 3)

Threshold conditions

Section F RMAR

Client money and client assets

FSA039

FSA039

FSA039

91

Section C RMAR

CFTC

FSA040 (note 8)

FSA040 (note 8)

FSA040 (note 8)

91

FSA040 (note 8)

Liquidity

MIF002

(notes 2, 3 and 10)

Metrics reporting

MIF003

(notes 2 and 3)

Concentration risk (non-K-CON)

MIF004

(notes 2, 3 and 11)

Concentration risk (K-CON)

MIF005

(notes 2, 3 and 11)

Group capital test

MIF006

(notes 3 and 12)

Liquidity Questionnaire

MLA-M (note 9)

MLA-M (note 9)

MLA-M (note 9)

91

MLA-M (note 9)

Note 1

All firms (except MIFIDPRU investment firms in relation to items reported under MIFIDPRU 9) must, when submitting the completed data item required, use the format of the data item set out in SUP 16 Annex 24R. Guidance notes for completion of the data items are contained in SUP 16 Annex 25G.

Note 2

A UK parent entity of an investment firm group to which consolidation applies under MIFIDPRU 2.5 must also submit this report on the basis of the consolidated situation.

Note 3

Data items MIF001 – MIF007 must be reported in accordance with the rules in MIFIDPRU 9.

Note 4

Only applicable to a firm that is a sole trader or partnership. Where the firm is a partnership, this report must be submitted by each partner.

Note 5

Except if the firm is an adviser (as referred to in IPRU-INV (3)-60(4)R).

Note 6

Only required in the case of an adviser (as referred to in IPRU-INV (3)-60(4)R)) that is a sole trader.

Note 7

FSA034 must be completed by a firm not subject to the exemption in IPRU(INV) 5.4.2R, unless it is a firm whose permitted business includes establishing, operating or winding up a personal pension scheme, in which case FIN071 must be completed.

FSA035 must be completed by a firm subject to the exemption in IPRU(INV) 5.4.2R.

Note 8

Only applicable to firms granted a Part 30 exemption order and operating an arrangement to cover forward profits on the London Metals Exchange.

Note 9

Only applicable to RAG 3 firms carrying on home financing or home finance administration connected to regulated mortgage contracts, unless as at 26 April 2014 the firm’sPart 4A permission was and remains subject to a restriction preventing it from undertaking new home financing or home finance administration connected to regulated mortgage contracts.

Note 10

Does not apply to an SNI MIFIDPRU investment firm which has been granted an exemption from the liquidity requirements in MIFIDPRU 6.

Note 11

Only applicable to a non-SNI MIFIDPRU investment firm.

Note 12

Only applicable to a parent undertaking to which the group capital test applies.

Note 13

Only applicable to firms that are collective portfolio management investment firms.
SUP 16.12.15RRP

The applicable data items referred to in SUP 16.12.4 R are set out76 according to firm type76 in the table below:

89Description of data item

Firms’ prudential category and applicable data items (note 1)

MIFIDPRU investment firms

Firms other than MIFIDPRU investment firms

IPRU(INV)

Chapter 3

IPRU(INV)

Chapter 5

91

IPRU(INV)

Chapter 11

(collective portfolio management firms only)

IPRU(INV)

Chapter 12

IPRU(INV)

Chapter 13

Solvency statement

(note 2)

No standard format

No standard format

No standard format

Balance sheet

FSA029

(note 3)

FSA029

FSA029

91

FSA029

FSA029

Section A RMAR

Income statement

FSA030

(note 3)

FSA030

FSA030

91

FSA030

FSA030

Section B RMAR

Capital adequacy

MIF001

(note 3 and 4)

FSA033

FSA034 or FSA035 or FIN071

(note 5)

91

FIN066

FIN069

Section D1 RMAR

ICARA assessment questionnaire

MIF007

(note 4)

Supplementary capital data for collective portfolio management investment firms

FIN067

(note 9)

Threshold conditions

Section F RMAR

Volumes and types of business

FSA03895

FSA038

FSA038

91

FSA038

FSA038

Client money and client assets

FSA039

FSA039

FSA039

91

FSA039

FSA039

Section C RMAR

Liquidity

MIF002

(notes 3, 4 and 6)

Metrics monitoring

MIF003

(notes 3 and 4)

Concentration risk (non-K-CON)

MIF004

(notes 3, 4 and 7)

Concentration risk (K-CON)

MIF005

(notes 3, 4 and 7)

Group capital test

MIF006

(notes 4 and 8)

Information on P2P agreements

FIN070

Note 1

All firms, except MIFIDPRU investment firms in relation to items reported under MIFIDPRU 9, must, when submitting the completed data item required, use the format of the data item set out in SUP 16 Annex 24. Guidance notes for completion of the data items are contained in SUP 16 Annex 25.

Note 2

Only applicable to a firm that is a sole trader or partnership. Where the firm is a partnership, this report must be submitted by each partner.

Note 3

A UK parent entity of an investment firm group to which consolidation applies under MIFIDPRU 2.5 must also submit this report on the basis of the consolidated situation.

Note 4

Data items MIF001 – MIF007 must be reported in accordance with the rules in MIFIDPRU 9.

Note 5

FSA034 must be completed by a firm not subject to the exemption in IPRU(INV) 5.4.2R, unless it is a firm whose permitted business includes establishing, operating or winding up a personal pension scheme, in which case FIN071 must be completed.

FSA035 must be completed by a firm subject to the exemption in IPRU(INV) 5.4.2R.

Note 6

Does not apply to an SNI MIFIDPRU investment firm which has been granted an exemption from the liquidity requirements in MIFIDPRU [6].

Note 7

Only applicable to a non-SNI MIFIDPRU investment firm.

Note 8

Only applicable to a parent undertaking to which the group capital test applies.

Note 9

Only applicable to firms that are collective portfolio management investment firms.
SUP 16.12.22ARRP

2The applicable data items referred to in SUP 16.12.4 R are set out according to type of firm in the table below:

89Description of data item

Firms’ prudential category and applicable data item (note 1)

MIFIDPRU investment firms

Firms subject to IPRU(INV)

Chapter 13

Firms that are also in one or more of RAGs 2 to 6 and not subject to IPRU(INV)

Chapter 13

Solvency statement

No standard format

(note 2)

Balance sheet

FSA029

(note 3)

Section A RMAR

Income statement

FSA030

(note 3)

Section B RMAR

Capital adequacy

MIF001

(notes 3 and 6)

Section D1 RMAR (note 9)

Liquidity

MIF002 (notes 3, 4 and 6)

Metrics monitoring

MIF003

(notes 3 and 6)

Concentration risk

(non-K-CON)

MIF004

(notes 3, 5 and 6)

Concentration risk

(K-CON)

MIF005

(notes 3, 5 and 6)

Group capital test

MIF006

(notes 6 and 8)

ICARA assessment questionnaire

MIF007

(note 6)

Supplementary capital data for collective portfolio management investment firms

FIN067

(note 10)

Professional indemnity insurance (note 11)90

Section E RMAR

Section E RMAR

Section E RMAR

Threshold conditions

Section F RMAR

Training and competence

Section G RMAR

Section G RMAR

Section G RMAR

COBS data

Section H RMAR

Section H RMAR

Section H RMAR

Client money and client assets

Section C RMAR

Section C RMAR

Fees and levies

Section J RMAR

Section J RMAR

Adviser charges

Section K RMAR (note 7)

Section K RMAR (note 7)

Section K RMAR (note 7)

Note 1

When submitting the completed data item required, a firm (except a MIFIDPRU investment firm in relation to an item reported under MIFIDPRU 9) must use the format of the data item set out in SUP 16 Annex 24R, or SUP 16 Annex 18AR in the case of the RMAR. Guidance notes for completion of the data items are contained in SUP 16 Annex 25, or SUP 16 Annex 18BG in the case of the RMAR.

Note 2

Only applicable to a firm that is a sole trader or partnership. Where the firm is a partnership, this report must be submitted by each partner.

Note 3

A UK parent entity of an investment firm group to which consolidation applies under MIFIDPRU 2.5 must also submit this report on the basis of the consolidated situation.

Note 4

Does not apply to an SNI MIFIDPRU investment firm which has been granted an exemption from the liquidity requirements in MIFIDPRU 6.

Note 5

Only applicable to a non-SNI MIFIDPRU investment firm.

Note 6

Data items MIF001 – MIF007 must be reported in accordance with the rules in MIFIDPRU 9.

Note 7

This item only applies to firms that provide advice on retail investment products and P2P agreements.

Note 8

Only applicable to a parent undertaking to which the group capital test applies.

Note 9

Where a firm submits data items for both RAG 7 and RAG 9, the firm must complete Section D1.

Note 10

Only applicable to firms that are collective portfolio management investment firms.

Note 11

This item only applies94 to firms that are subject to an FCA requirement to hold professional indemnity insurance94.

90
SUP 16.12.25ARRP

2The applicable data items referred to in SUP 16.12.4 R are set out according to type of firm in the table below:

89Description of data item

Firms’ prudential category and applicable data items (note 1)

MIFIDPRU investment firms

Firms other than MIFIDPRU investment firms

IPRU(INV)

Chapter 3

IPRU(INV)

Chapter 5

91

IPRU(INV)

Chapter 13

Solvency statement

(note 2)

No standard format

Balance sheet

FSA029

(note 3)

FSA029

FSA029

91

Section A RMAR

Income statement

FSA030

(note 3)

FSA030

FSA030

91

Section B RMAR

Capital adequacy

MIF001

(notes 3 and 5)

FSA033

FSA034 or FSA035 or FIN071

(note 4)

91

Section D1 RMAR

Liquidity

MIF002

(notes 3 and 5)

Metrics monitoring

MIF003

(notes 3 and 5)

Concentration risk (non-K-CON)

MIF004

(notes 3, 5 and 7)

Concentration risk (K-CON)

MIF005

(notes 3, 5 and 7)

Group capital test

MIF006

(notes 5 and 6)

ICARA assessment questionnaire

MIF007

(note 5)

Threshold conditions

Section F RMAR 97

Client money and client assets

FSA039

FSA039

FSA039

91

Section C RMAR 97

Note 1

All firms (except MIFIDPRU investment firms in relation to items reported under MIFIDPRU 9) when submitting the completed data item required, must use the format of the data item set out in SUP 16 Annex 24. Guidance notes for completion of the data items are contained in SUP 16 Annex 25.

Note 2

Only applicable to a firm that is a sole trader or partnership. Where the firm is a partnership, this report must be submitted by each partner.

Note 3

A UK parent entity of an investment firm group to which consolidation applies under MIFIDPRU 2.5 must also submit this report on the basis of the consolidated situation.

Note 4

FSA034 must be completed by a firm not subject to the exemption in IPRU(INV) 5.4.2R, unless it is a firm whose permitted business includes establishing, operating or winding up a personal pension scheme, in which case FIN071 must be completed.

FSA035 must be completed by a firm subject to the exemption in IPRU(INV) 5.4.2R.

Note 5

Data items MIF001 – MIF007 must be reported in accordance with the rules in MIFIDPRU 9.

Note 6

Only applicable to a parent undertaking to which the group capital test applies.

Note 7

Only applicable to a non-SNI MIFIDPRU investment firm.
FEES 3.2.7RRP

Table of application, notification, vetting and other fees payable to the FCA32

31

Part 1A: Application, notification and vetting fees66

31

31(1) Fee payer

(2) Fee payable (£)37 by reference to the pricing category in FEES 3 Annex 1AR.66

Due date

(a) Any applicant for Part 4A permission (including an incoming firm applying for top-up permission) whose fee is not payable pursuant to sub- paragraph (zza)52 of this table

26

(1) Unless (2) or (3)66 applies, in1 respect of a particular application, the highest of the tariffs set out in FEES 3 Annex 1AR66 which apply to that application.

66(2) 50% of the tariff payable under (1) is payable when either (a) or (b) apply:

66(a) the application is one referred to in paragraph p; or

66(b) the application is a limited permission case under FEES 3 Annex 1.

(3) If the applicant applies for registration under article 8(1) of the MCD Order at the same time as applying for a Part 4A permission66, the fee payable is the higher of: 80

(i) the fee 66payable in (1) or (2); and 80

(ii) the fee payable in FEES 3 Annex 10AR. 80

(4) [deleted]66

1418013434343434343441

On or before the application is made

(aa) A person who makes an application under section 24A of the Consumer Credit Act 1974 which meets the conditions of article 31 (Applications for a standard licence where no determination made before 1 April 2014) of the Financial Services and Markets Act 2000 (Regulated Activities) (Amendment) (No 2) Order 2013 (the “relevant application”)30

As (a) above less any amount paid to the Office of Fair Trading in relation to the relevant application.

Within 30 days of the date of the invoice.

(b) [deleted]56

4

(c) [deleted]66

(d) [deleted]66

27		 2727

(da) Persons making an application or notification in relation to applications set out in FEES 3 Annex 2R:

66(i) an application for an order declaring a scheme to be recognised under section 271A or section 272 of the Act72;

66(ii) [deleted]74

68

66(v) an AIFM notifying the FCA of its intention to market an AIF in the UK under regulation 58 or 59 of the AIFMD UK regulation; and68

66(vi) an applicant for registration on the register of small registered UK AIFM.

58366666

Category applicable to the application or notification set out in FEES 3 Annex 2R66

36

On or before the date the application or notification66 is made

36

(e) Any applicant making an application set out in FEES 3 Annex 14R - Other FCA application fees:66

66(i) Any person seeking an order under section 326(1) of the Act to become a designated professional body;

66(ii) applicant to be added to the list of designated investment exchanges;

66(iii) any applicant for recognition as an accredited body;

66(iv) any applicant for registration under regulation 14 of the Risk Transformation Regulations as a protected cell company;

66(v) an application for recognition of an administrator in accordance with article 32 of the benchmarks regulation;

66(vi) an application for endorsement of a benchmark or family of benchmarks in accordance with article 33 of the benchmarks regulation;

66(vii) an application for authorisation under regulation 7 of the DRS Regulations, or the operator of a trading venue seeking verification of their compliance with Title V of MiFID under regulation 8 of the DRS Regulations;

66(viii) an application for variation of an authorisation under regulation 12 of the DRS Regulations;

66(ix) an application for connection to the market data processor system to provide reports directly to the FCA under MiFIR;

66(x) an application to connect to the market data processor system to provide markets data (other than transaction reports) under MAR 10;

(xi) an application for registration71 as a third party verifier;

(xii) an application for, to vary or cancel an approver permission70.

27272766

Pricing category applicable to the application set out in FEES 3 Annex 14R66

2727

As specified in FEES 3 Annex 14R66

28

28(ea) [deleted]66

5656

(eb) [deleted]66

28

(f) Persons making an application referred to in FEES 3 Annex 15R – Transaction fees:66

66(i) any applicant for a certificate under article 54 of the Regulated Activities Order;

66(ii) a transferor in the case of an insurance business transfer scheme;

66(iii) an issuer applying for registration of a regulated covered bond;

66(iv) an issuer who proposes to make a material change to the contractual terms of a regulated covered bond under RCB 3.5.4D;

66(v) an applicant for FCA permission for:

66i. an agreement to be enforced under section 28A(3)(a) of the Act; or

66ii. money paid or property transferred under the agreement to be retained under section 28A(3)(b) of the Act.

(vi) 67Applications in respect of controlled functions under the Senior Managers and Certification Regime (SMCR), including applications by principal firms in respect of SMCR functions in appointed representatives.

Pricing category applicable to the application or notification set out in FEES 3 Annex 15R.66

As specified in FEES 3 Annex 15R66

(g) Any applicant for recognition as a UK recognised body:62

(i) under section 287 of the Act; or62

(ii) under regulation 2(1) of the RAP regulations6256

17781717

FEES 3 Annex 3, part 1

On or before the date the application is made26

(ga) [deleted]52

26353535

(h) Any applicant for recognition as an ROIE78 under section 287 or section 292 of the Act

7878

FEES 3 Annex 3, part 2

On or before the date the application is made

(i) [deleted]35

35		 35 35

(j) [deleted]38

38

38

(k) [deleted]35

35		 35 35

(l) [deleted]38

38

72

38

(m) [deleted]38

38

72

38

(n) [deleted]66

(o) [deleted]65

112229529782929556782929295557829295782929297829295

[deleted]65

5255512515555157857855256

[deleted]65

278292978292978229

(oa) [deleted]65

2937373737585637373737583737

[deleted]65

37

[deleted]65

37373737

(p) A firm applying for a variation of its Part 4A permission, as referred to in FEES 3 Annex 16R66, whose fee is not payable pursuant to sub- paragraphs 64(zza)52 or (zzh) 64 of this table

26

(1) As specified in FEES 3 Annex 1R-FEES 3 Annex 14R66

(2) Subject to (3) below, if the new business of the firm would fall within more than one pricing category in FEES 3 Annex 1AR, the fee payable is that in the highest pricing category applicable to the application.66

(2A) [deleted]66

(3) [deleted]66

(3A) [deleted]66

(3B) [deleted]66

(3C) If the applicant applies for registration under article 8(1) of the MCD Order at the same time as it applies for a variation of its Part 4A permission, the fee payable is the highest of:66

66(i) the fees set out in FEES 3 Annex 10AR;

(ii) the amount payable in accordance with FEES 3 Annex 16R;

(3D) [deleted]66

(4) [deleted]66

[deleted]66

3080444130808011178783778378080371137373030233737373730373737303711113737303730804111781444444

On or before the date the application is made

30(pa) A person who makes an application under section 30(1) of the Consumer Credit Act 1974 which meets the conditions of article 33 (Variations at request of licensee where no determination made before 1 April 2014) of the Financial Services and Markets Act 2000 (Regulated Activities) (Amendment) (No 2) Order 2013 (the “relevant variation application”)

As (a) or 31(p) above, less any amount paid to the Office of Fair Trading in relation to the relevant variation application.

Within 30 days of the date of the invoice.

2(q) [deleted]38

77137913797722227

38

38

333

2(r) [deleted]46

 66 566

(s) [deleted]66

5		 7777375937597777377737 37

6(t) [deleted]46

20

(u) [deleted]34

34		 34 34

(v) [deleted]38

2222

38

38

[deleted]35

35		 35 35

(x)[deleted]38

38

388

(y) A person who makes an application or notification to the FCA under the Payment Services Regulations, including an application for variation of authorisation or registration.66

8

The fee payable is that in the highest pricing category applicable to the application or notification as set out in FEES 3 Annex 8R66.

47

On or before the date the application is made.

(ya) [deleted]66

47		 47 47

(z) [deleted]66

47

(za) [deleted]66

47

(zb) [deleted]66

47		 5050475050475047474747475050

(zc) [deleted]66

47		 474747474747

(zd)

47		 47

[deleted]47

(ze) Any person to which the Special Project Fee for restructuring applies under FEES 3 Annex 9.12

12

Special Project Fee for restructuring in accordance with FEES 3 Annex 9 .

30 days of the date of the invoice.9

(zf) [deleted]78

78		 78 91678

(zg) A person who makes an application or notification to the FCA under the Electronic Money Regulations, including an application for variation of authorisation or registration66.

16

The fee payable is that in the highest pricing category applicable to the application or notification as set out in FEES 3 Annex 10R.66

On or before the date the application is made.

(zh) [deleted]66

16

(zi) [deleted]66

1614

(zj) [deleted]66

16		 5050

(zk) [deleted]66

16

(zl) [deleted]66

15		 18

(zm) [deleted]66

18		 4141

(zn) [deleted]66

18		 4141 21

21(zo) In the case of persons in respect of which the FCA has given notice of its intention to take, or appoint a competent person to take, any steps under CONRED 2.5.12R or 4.5.1R69, either:

(i) a Firm (as defined in CONRED 2.1.1R(1)) or 4.1.3R69; or

(ii) a person falling within CONRED 2.1.2R(1) or 4.1.5R69.

An amount equal to:

(1) a sum determined by the number of hours, or part of an hour, taken by the FCA in relation to work conducted in taking steps under CONRED 2.5.12R or 4.5.1R69 recorded on the FCA's systems, multiplied by the rate in FEES 3 Annex 9 (11)R; or

(2) any amount invoiced to the FCA by a competent person in relation to any work carried out by that competent person in connection with its appointment by the FCA under CONRED 2.5.12R or 4.5.1R69.

Within 30 days of the date of the invoice.

78(zp) A person in respect of which the FCA37 has given notice of its intention to itself appoint a skilled person to provide it with a report pursuant to section 166(3)(b) of the Act (including as applied by section 312P of the Act)75 and SUP 5.2 or, as the case may be, CTPS 13.275.

37

Any amount invoiced to the FCA37 by a skilled person in relation to any work carried out by that skilled person in connection with its appointment by the FCA37 pursuant to section 166(3)(b) of the Act.

37

Within 30 days of the date of the invoice.

78(zq) A person in respect of which the FCA37 has given notice of its intention to itself appoint a skilled person to collect or update information pursuant to section 166A(2)(b) of the Act (including as applied by section 312P of the Act)75.

37

Any amount invoiced to the FCA37 by a skilled person in relation to any work carried out by that skilled person in connection with its appointment by the FCA 37 pursuant to section 166A(2)(b) of the Act.

3737

Within 30 days of the date of the invoice.33

33(zr) [deleted]38

38

38

(zs) [deleted]66

3031		 31303131

(zt) An applicant for registration in the Financial Services Register under article 8(1) of the MCD Order. 80

Unless (1), or (2) applies, the fee as set out in FEES 3 Annex 10A. 80

(1) If the applicant is applying for a Part 4A permission at the same time as it applies for registration under article 8(1) of the MCD Order, the fee payable in row (a), column (2) paragraph (3) of this Table. 80

(2) If the applicant is applying for a variation of a Part 4A permission at the same time as it applies for registration under article 8(1) of the MCD Order, the fee payable in row (p), column 2 paragraph (3)(c) of this Table. 80

On or before the application is made.80

(zu)40 Any person to which the Designated Credit Reference Agencies and Finance Platform42 Fee applies under FEES 3 Annex 10B.

39

Designated Credit Reference Agencies and Finance Platform42 Fee in accordance with FEES 3 Annex 10B.

Within 30 days of the date of the invoice.

43(zv) Any firm that meets the test in FEES 3 Annex 10C(1)R(1) (PPI campaign fees).

The amount set out in FEES 3 Annex 10C(1) R(2).

Within 30 days of the date of the invoice.

(zw) [deleted]66

4563634963

(zx) [deleted]66

46		 63

(zy) [deleted]66

464956

56

63

(zz) [deleted]66

51

52(zza) An application for authorisation as a regulated benchmark administrator.

The highest of the applicable tariffs set out in FEES 3 Annex 1AR.66

Where an applicant intends to administer benchmarks falling into different complexity groupings, it will pay one fee only, for the highest category applied for. If, once authorised, a regulated benchmark administrator notifies the FCA of its intention to administer other/additional benchmarks no further application fee is payable (even if the other/additional benchmark falls into a higher complexity category).

On the date the application is made.

(zzb) [deleted]66

52

(zzc) [deleted]66

52

54(zzd) applications for claims management companies

The fee applicable to the application as set out in paragraph CMC of Part 2 of FEES 3 Annex 1R.66

Firms which already have Part 4A permissions and are applying to vary their permissions will pay 50% of66 the relevant fee.

On the date the application is made.

(zze) [deleted]66

55

61(zzf) UK-based applicants for registration as a trade repository; a securitisation repository, or a third country applicant seeking recognition as a trade repository.

5,000

Applicants for registration as a trade repository who already hold registration as a securitisation repository, or vice versa, will receive a 50% discount on the relevant application fee.

Applicants for registration as a trade repository to carry on activity for the purposes of UK SFTR who already hold registration as a trade repository under EMIR or vice versa, will receive a 50% discount on the relevant application fee.

On the date the application is made.

61(zzg) UK-based applicants for registration as a credit rating agency or a third country applicant seeking certification as a credit rating agency.

The fee set out in FEES 3 Annex 13R.

On the date the application is made.

64(zzh) Permission for

(1) carrying on funeral plan distribution;

(2) carrying out a funeral plan contract as provider; or

(3) carrying out a funeral plan contract as provider and entering as provider into a funeral plan contract.

(1) The highest of the tariffs set out in FEES 3 Annex 1R part 3A which apply to that application, subject to (2) and (3) below.

(2) Unless (3) below applies, where an applicant was carrying out any of the activities referred to in (zzh)(1)-(3) on 1 September 2021, and makes an application for permission for any of those activities after 1 November 2021, the application fees shall be:

(a) £3,500 for (zzh)(1) or zzh(2);

(b) £14,000 for (zzh)(3).

(3) If an applicant which already has any of the permissions referred to in (zzh) applies to vary its permission, the application fees shall be:

(a) £500 for (zzh)(1);

(b) £1,250 for (zzh)(2); and

(c) £5,000 for (zzh)(3).

On or before the application is made.

32Part 2: Primary market fees73

38

(1) Fee payer

(2) Fee payable

(3) Due date

(a)

(i) An issuer which has not made public its annual financial report before the latest time specified in DTR 4.1.3 R.

(ii) An issuer which has not made public its half-yearly financial report before the latest time specified in DTR 4.2.2 R (2).

FEES 3 Annex 12R38

Within 30 days of the date of the invoice.

38(b) An applicant for approval as a sponsor.

FEES 3 Annex 12R

On or before the date the application is made.

38(c) For the purposes of48 the listing rules:48

(i)48 an issuer requesting approval of a document arising in relation to a specific event or transaction, which is not a significant transaction or a super transaction; or48

48(ii) an issuer or person applying for eligibility for listing of its securities.

FEES 3 Annex 12R

On or before the date that relevant document is first submitted to the FCA.

38(d) Under the Prospectus Rules or the Prospectus Regulation60, an issuer or a person requesting approval or review of a document arising in relation to a specific event or transaction, which is not a significant transaction or a super transaction.

FEES 3 Annex 12R

On or before the date that relevant document is first submitted to the FCA.

38(e) An issuer requesting the approval or review of a document in connection with a super transaction.

FEES 3 Annex 12R

On or before the date that relevant document is first submitted to the FCA.

38(f) An issuer requesting the approval or review of a document in connection with a significant transaction.

FEES 3 Annex 12R

On or before the date that relevant document is first submitted to the FCA.

38(g) A person who requests the FCA’s approval of a document that includes a mineral expert’s report and who is a fee payer under one or more of the categories (c), (d), (e), and (f) above must additionally pay a fee under this category.

FEES 3 Annex 12R

On or before the date that relevant document is first submitted to the FCA.

38(h) An applicant for approval as a primary information provider.

FEES 3 Annex 12R

On or before the date the application is made.

[Note:Guidance on how a firm liable to pay a fee under both rows (s) and (ze) of this table for the same transaction should expect to be treated is set out in FEES 3 Annex 11 G.]19

COLL 6.12.3BGRP
(1) 5In addition, an authorised fund manager 6 subject to COLL 6.12.3R(2) should submit a notification to the FCA if there has been a significant change to the fund’s risk profile since its last report, by sending the form in COLL 6 Annex 2R, completed as applicable, to fundsupervision@fca.org.uk.(2) A significant change to the fund’s risk profile could include, but is not limited to:(a) the first use of derivatives for investment purposes, if derivatives have previously been
COLL 5.3.8RRP
(1) 2An authorised fund manager must calculate the global exposure of a UCITS scheme by using:(a) the commitment approach; or(b) the value at risk approach.(2) An authorised fund manager must ensure that the method selected in (1) is appropriate, taking into account:(a) the investment strategy pursued by the UCITS scheme;(b) the types and complexities of the derivatives and forward transactions used; and(c) the proportion of the scheme property comprising derivatives and forward
COLL 6.13.6RRP
An authorised fund manager of a UCITS scheme2must ensure a high level of security during the electronic data processing referred to in COLL 6.13.5 R as well as the integrity and confidentiality of the recorded information, as appropriate.[Note: article 7(2) of the UCITS implementing Directive]
COLL 5.7.11GRP
An authorised fund manager carrying out due diligence for the purpose of the rules in this section should make enquiries or otherwise obtain information needed to enable him properly to consider:(1) whether the experience, expertise, qualifications and professional standing of the second scheme's investment manager is adequate for the type and complexity of the second scheme;(2) the adequacy of the regulatory, legal and accounting regimes applicable to the second scheme and its
COLL 5.6.7RRP
(1) This rule does not apply in respect of a transferable security or an approved money-market instrument to which COLL 5.6.8R (Spread: government and public securities) applies21. (2) Not more than 20% in value of the scheme property is to consist of deposits with a single body.(3) Not more than 10% in value of the scheme property is to consist of transferable securities or money-market instruments issued by any single body subject to COLL 5.6.23 R (Schemes replicating an index).(3A)