Related provisions for BIPRU 7.9.6

1 - 5 of 5 items.

BIPRU 7.9.1G01/04/2013

A firm is required under GENPRU 2.1.52 R (Calculation of the market risk capital requirement) to calculate its market risk capital requirement using the rules in BIPRU 7. However, the appropriate regulator may at the firm's request modify GENPRU 2.1.52 R to allow the firm to calculate all or part of the PRR for the positions covered by that model by using a CAD 1 model (for options risk aggregation and/or interest rate pre-processing) or a VaR model (value at risk model) instead.

BIPRU 7.9.2G01/04/2013

The purpose of BIPRU 7.9 is to provide guidance on the appropriate regulator's policy for granting CAD 1 model waivers under section 138A of the Act (Modification or waiver of rules). The policy recognises that CAD 1 models may vary across firms but, as a minimum, the appropriate regulator will need to be satisfied:(1) about the quality of the internal controls and risk management relating to the model (see BIPRU 7.9.19G - BIPRU 7.9.23G for further details);(2) about the quality

BIPRU 7.9.3G01/01/2007

BIPRU 7.9 also explains how the output from the CAD 1 model is fed into the market risk capital requirement calculation.

BIPRU 7.9.7G01/01/2007

Table: Types of CAD 1 model

This table belongs to BIPRU 7.9.6G

	Options risk aggregation models	Interest rate pre-processing models
Brief description and eligible instruments	Analyse and aggregate options risks for: interest rate options; equity options; foreign currency options; commodity options; and CIU options.	May be used to calculate duration weighted positions for: interest rate futures; forward rate agreements (FRAs); forward commitments to buy or sell debt securities; options, swaps or warrants on interest rates or debt securities and options on such swaps; amortising bonds; equity futures, forwards, warrants and options (but only in relation to the interest rate risk inherent in these products); and foreign currency futures, forwards, swaps and options, but only in relation to the interest rate risk inherent in these products.
The output and how it is used in the PRR calculation	Depending on the type of model and the requirements in the CAD 1 model waiver granted, the outputs from an options risk aggregation model are used as an input to the market risk capital requirement calculation.	Depending on the type of model and the requirements in the CAD 1 model waiver granted, the individual sensitivity figures produced by this type of CAD 1 model are either input into the calculation of interest rate PRR under the interest rate duration method (see BIPRU 7.2.63R) or are converted into notional position and input into the calculation of interest rate PRR under the interest rate maturity method (see BIPRU 7.2.59R).

Options risk aggregation models

Interest rate pre-processing models

Brief description and eligible instruments

Analyse and aggregate options risks for:

May be used to calculate duration weighted positions for:

interest rate futures;
forward rate agreements (FRAs);
forward commitments to buy or sell debt securities;
options, swaps or warrants on interest rates or debt securities and options on such swaps;
amortising bonds;
equity futures, forwards, warrants and options (but only in relation to the interest rate risk inherent in these products); and
foreign currency futures, forwards, swaps and options, but only in relation to the interest rate risk inherent in these products.

The output and how it is used in the PRR calculation

Depending on the type of model and the requirements in the CAD 1 model waiver granted, the outputs from an options risk aggregation model are used as an input to the market risk capital requirement calculation.

Depending on the type of model and the requirements in the CAD 1 model waiver granted, the individual sensitivity figures produced by this type of CAD 1 model are either input into the calculation of interest rate PRR under the interest rate duration method (see BIPRU 7.2.63R) or are converted into notional position and input into the calculation of interest rate PRR under the interest rate maturity method (see BIPRU 7.2.59R).

BIPRU 7.9.9G01/04/2013

Details of the general waiver process are set out in SUP 8 (Waiver and modification of rules). Further details of the waiver process applicable to certain waivers relating to BIPRU (including CAD 1 model waivers) can be found in BIPRU 1.3 (Applications for advanced approaches). Because of the complexity of a CAD 1 model waiver, it is recommended that, as set out in SUP 8.3.4 G and BIPRU 1.3.21 G, a firm contact its usual contact at the appropriate regulator to discuss its proposed

BIPRU 7.9.11G01/04/2013

The model review process may be conducted through a series of visits covering various aspects of the firm's control and IT environment. Before these visits the appropriate regulator may ask the firm to provide some information relating to its waiver request accompanied by some specified background material. The model review visits are organised on a timetable that allows a firm being visited sufficient time to arrange the visit and provide the appropriate pre-visit informatio

BIPRU 7.9.14G01/01/2007

A review by a skilled person may be used before a CAD 1 model waiver is granted to supplement the waiver process or after the waiver has been granted to review the CAD 1 model.

BIPRU 7.9.16G01/04/2013

Where a firm operates any part of its CAD 1 model outside the United Kingdom, the appropriate regulator may take into account the results of any review of that model carried out by any overseas regulator concerned. The appropriate regulator may wish to receive information directly from that regulator.

BIPRU 7.9.17G01/04/2013

No changes should be made to a CAD 1 model unless the change is not material. Material changes to a CAD 1 model will require a renewed waiver to be issued. Materiality is measured from the time that the waiver is granted or, if the waiver has been varied in accordance with section 138A of the Act, any later time that may be specified in the waiver for these purposes. If a firm is considering making material changes to its CAD 1 model, then it should notify the appropriate regulator

BIPRU 7.9.18G01/04/2013

If the CAD 1 model ceases to meet the requirements of the waiver, the firm should notify the appropriate regulator at once. The appropriate regulator may then revoke the waiver unless it is varied in accordance with section 138A of the Act. If the CAD 1 model waiver contains conditions it is a condition of using the CAD 1 model approach that the firm should continue to comply with those conditions.

BIPRU 7.9.20G01/01/2007

A firm should be able to demonstrate that the risk management standards set out in BIPRU 7.9 are satisfied by each legal entity with respect to which the CAD 1 model approach is being used (even though they are expressed to refer only to a firm). This is particularly important for subsidiary undertakings in groups subject to matrix management where the business lines cut across legal entity boundaries.

BIPRU 7.9.21G01/01/2007

(1) A firm should have a conceptually sound risk management system which is implemented with integrity and should meet the minimum standards set out in this paragraph.(2) A firm should have a risk control unit that is independent of business trading units and reports directly to senior management. The unit should be responsible for designing and implementing the firm's risk management system. It should produce and analyse daily reports on the risks run by the business and on the

BIPRU 7.9.22G01/04/2013

In assessing whether the risk management and control framework is implemented with integrity, the appropriate regulator will consider the IT systems used to run the CAD 1 model and associated calculations. The assessment will include, where appropriate:(1) feeder systems; risk aggregation systems; the integrity of the data (i.e. whether it is complete, coherent and correct); reconciliations and checks on completeness of capture; and(2) system development, change control and documentation;

BIPRU 7.9.23G01/01/2007

A firm should take appropriate steps to ensure that it has adequate controls relating to:(1) the derivation of the PRR from the CAD 1 model output;(2) CAD 1 model development, including independent validation;(3) reserving;(4) valuation (see GENPRU 1.3 (Valuation)), including independent validation; and(5) the adequacy of the IT infrastructure.

BIPRU 7.9.24G01/01/2007

A firm should take appropriate steps to ensure that its CAD 1 model captures and produces an accurate measure of the risks inherent in the portfolio covered by the CAD 1 model. These risks may include, but are not limited to, gamma, vega and rho.

BIPRU 7.9.26G01/04/2013

The appropriate regulator does not specify the methodology that a firm should employ in order to produce the appropriate outputs from its options risk aggregation CAD 1 model. However, BIPRU 7.9.27G - BIPRU 7.9.43G provide details of how a firm could meet the requirement to capture gamma, vega and rho risks using a scenario matrix approach. Where a firm adopts the scenario matrix approach then the standards set out in BIPRU 7.9.27G - BIPRU 7.9.43G should be followed. The firm

BIPRU 7.9.43G01/01/2007

In using the scenario matrix approach, none of the steps followed will take specific account of a firm's exposure to rho risk. Where a firm can demonstrate that for interest rate-related options the rho sensitivity is effectively included in the delta sensitivities produced, there is no separate capital requirement relating to rho. For all other options except commodity options, a firm should calculate a rho sensitivity ladder by currency using its CAD 1 model and either feed

BIPRU 7.10.2G01/04/2013

BIPRU 7.10 provides details of when the appropriate regulator expects to allow a firm to use a VaR model (value at risk model) for the purpose of calculating part or all of its PRR. It introduces the concept of a VaR model, the methodology behind it and the link to the standard market risk PRR rules. It then goes on to detail the application and review process. The bulk of BIPRU 7.10 specifies the model standards and risk management standards that firms will be required to meet

BIPRU 7.10.3G01/01/2021

The models described in BIPRU 7.10 are described as VaR models in order to distinguish them from CAD 1 models, which are dealt with in BIPRU 7.9 (Use of a CAD 1 model). A VaR model is a risk management model which uses a statistical measure to predict profit and loss movement ranges with a confidence interval. From these results PRR charges can be calculated. The standards described in BIPRU 7.10, and which will be applied by the appropriate regulator, are based on 4Annex V of

BIPRU 7.10.4G01/01/2007

The aim of the VaR model approach is to enable a firm with adequate risk management systems to be subject to a PRR requirement that is more closely aligned with the risks to which it is subject than the PRR requirements generated by the standard market risk PRR rules. This provides a firm with an incentive to measure market risks as accurately and comprehensively as possible. It is crucial that those responsible for managing market risk at a firm should be aware of the assumptions

BIPRU 7.10.6G01/01/2007

A firm should not use the VaR model approach to calculate PRR unless it has a VaR model permission. If a firm does not have such a permission it should use the standard market risk PRR rules. Therefore, a firm needs to apply for a VaR model permission in order to calculate its PRR using a VaR model instead of (or in combination with) the standard market risk PRR rules.

BIPRU 7.10.7G01/01/2021

A waiver or other permission allowing the use of models in the calculation of PRR will be considered with regards to CAD and any VaR model permission which is granted will be considered with regards to CAD.4 Accordingly, the appropriate regulator is likely only to grant a waiver or other permission allowing the use of models in the calculation of PRR if it is a VaR model permission or a CAD 1 model waiver.

BIPRU 7.10.39R01/01/2007

In the case of general market risk and risks with respect to which the standard market risk PRR rules do not distinguish between general market risk and specific risk, a firm'sVaR model must capture a sufficient number of risk factors in relation to the level of activity of the firm and in particular the risks set out in BIPRU 7.10.40R - BIPRU 7.10.44R.

BIPRU 7.10.134G01/04/2013

By modifying GENPRU 2.1.52 R (Calculation of the market risk capital requirement) to allow the firm to use the VaR model to calculate all or part of its PRR for certain positions, the appropriate regulator is treating it like an application rule. The modification means that the PRR calculation set out in BIPRU 7.10 supersedes the standard market risk PRR rules for products and risks coming within the scope of the VaR model permission.

BIPRU 7.10.136R31/12/2011

(1) This rule applies to a position of a type that comes within the scope of a firm'sVaR model permission.(2) Subject to BIPRU 7.10.136A R, if, 3where the standard market risk PRR rules apply, a position is subject to a PRR charge and the firm'sVaR model permission says that it covers the risks to which that PRR charge relates, the firm must, for those risks, calculate the PRR for that position under the VaR model approach rather than under the standard market risk PRR rules.3(3)

BIPRU 7.10.136AR31/12/2011

3A firm must calculate the market risk capital requirement for securitisation positions and positions in the correlation trading portfolio in accordance with the standard market risk PRR rules, with the exception of those positions subject to the all price risk measure.

BIPRU 7.10.137R01/01/2007

A firm may exclude from the VaR model approach immaterial risks within the scope of its VaR model approach. If a firm does so it must instead apply the standard market risk PRR rules to those risks.

BIPRU 7.10.138R01/01/2007

(1) If a firm calculates its market risk capital requirement using a combination of the standard market risk PRR rules and either the VaR model approach or the VaR model approach with the CAD 1 model approach the PRR from each method must be added together.(2) A firm must take appropriate steps to ensure that all of the approaches are applied in a consistent manner.

BIPRU 7.10.139G01/01/2007

An example of the effect of BIPRU 7.10.138R is that where a firm normally calculates the PRR for a particular portfolio using a VaR model, a firm should not switch to the standard market risk PRR rules purely to achieve a more attractive PRR.

BIPRU 7.10.140R01/01/2007

If:(1) the standard market risk PRR rules provide for a choice of which of the PRR charges to use or specify that one type must be used in some circumstances and that another type must be used in other circumstances;(2) one of those types is disapplied under BIPRU 7.10.136R; and(3) the other type is not disapplied;the firm:(4) must use the VaR model approach if under the standard market risk PRR rules the firm must use the standard market risk PRR rules in (2); and(5) may use

BIPRU 7.10.141G01/01/2007

The treatment of a convertible is an example of a situation in which BIPRU 7.10.140R applies. The table in BIPRU 7.3.3R (Table: Instruments which result in notional positions) shows that there are circumstances in which under the standard market risk PRR rules a firm should calculate an equity PRR and that there are circumstances in which a firm may choose between calculating an equity PRR and an interest rate PRR. BIPRU 7.10.140R would be relevant if a firm'sVaR model permission

BIPRU 7.10.142R01/01/2007

The standard market risk PRR rules for the option PRR are only disapplied to the extent that the derived positions arising under BIPRU 7.6.13R (Table: Derived positions) come within the scope of the VaR model permission.

BIPRU 7.10.143R01/01/2007

If a firm'sVaR model permission covers interest rate general market risk but not interest rate specific risk, the firm must calculate the interest rate PRR so far as it relates to interest rate specific risk in accordance with the standard market risk PRR rules except that the firm must not use the basic interest rate PRR calculation in BIPRU 7.3.45R (Basic interest rate calculation for equity instruments).

BIPRU 7.10.144R01/01/2007

If a firm'sVaR model permission covers equitygeneral market risk but not equityspecific risk, the firm must calculate the equity PRR so far as it relates to equityspecific risk in accordance with the standard market risk PRR rules except that the PRR for equityspecific risk must be calculated under the standard equity method.

FEES 3.2.7R01/09/2021

Table of application, notification, vetting and other fees payable to the FCA32

31Part 1: Application, notification and vetting fees
31(1) Fee payer	(2) Fee payable (£)37	Due date
(a) Any applicant for Part 4A permission (including an incoming firm applying for top-up permission) whose fee is not payable pursuant to sub- paragraph (zza)52 of this table 26	(1) Unless (2),41 (3) or (4)41 applies, in1 respect of a particular application, the highest of the tariffs set out in FEES 3 Annex 1 part 11 which apply to that application. When both (A) and (B) apply, 50% of the tariff payable under (1):34 (2) 50% of the tariff payable under (1) is payable when either (a) or (b) apply: (a) the application is one referred to in paragraph p; or (b) the application is a limited permission case under . (A) the application only involves a simple change of legal status as set out in FEES 3 Annex 1 part 6; and34 (B) the application is:34 (i) a straightforward case under paragraph 2(d) or 3(g) of FEES 3 Annex 1; (ii) a moderately complex case under paragraph 2(e) or 3(h) of FEES 3 Annex 1; or (iii) a limited permission case under paragraph 3(i) of FEES 3 Annex 1. (3) If the applicant applies for registration under article 8(1) of the MCD Order at the same time as applying for a Part 4A permission, the fee payable is the higher of: 79 (i) the fee otherwise payable in (1) or (2); and 79 (ii) the fee payable in FEES 3 Annex 10AR. 79 (4) No fee is payable if the applicant satisfies the criteria set out in FEES 4 Annex 2BR(5)(a).41 1 79 34 34 34 34	On or before the application is made
(aa) A person who makes an application under section 24A of the Consumer Credit Act 1974 which meets the conditions of article 31 (Applications for a standard licence where no determination made before 1 April 2014) of the Financial Services and Markets Act 2000 (Regulated Activities) (Amendment) (No 2) Order 2013 (the “relevant application”)30	As (a) above less any amount paid to the Office of Fair Trading in relation to the relevant application.	Within 30 days of the date of the invoice.
(b) [deleted]56 4
(c) Any applicant for a certificate under article 54 of the Regulated Activities Order	2,000	On or before the application is made
(d) Applicants for an authorisation order for, or recognition under section 272 of the Act 27 of, a collective investment scheme	FEES 3 Annex 2R, part 227 27	On or before the application is made
(da) Applicants for the authorisation of an AIF as a LTIF 58 36	FEES 3 Annex 2R, part 2A36	On or before the date the application is made36
(e) The management company 27 of a scheme making a notification under section 264 of the Act 27 27	FEES 3 Annex 2R, part 327 27	On or before the date the application is made28
28(ea) (i) A non-UK AIFM 56 (with a branch in the UK) notifying the FCA of its intention to market an AIF in the UK under regulation 5956 of the AIFMD UK regulation (ii) An AIFM notifying the FCA of its intention to market an AIF in the UK under regulation 58 or 59 of the AIFMD UK regulation	FEES 3 Annex 2 R, part 4	On or before the date the notification is made
28(eb) An applicant for registration on the register of small registered UK AIFM which the FCA is required to maintain under regulation 10 of the AIFMD UK regulation	£750	On or before the date the application is made
(f) Any person seeking an order under section 326(1) of the Act to become a designated professional body.	10,000	30 days after the order is granted
(g) Any applicant for recognition as a UK recognised body:62 (i) under section 287 of the Act; or62 (ii) under regulation 2(1) of the RAP regulations 62 56 17 77 17 17	FEES 3 Annex 3, part 1	On or before the date the application is made26
(ga) [deleted]52 26 35 35 35
(h) Any applicant for recognition as an ROIE 77 under section 287 or section 292 of the Act 77 77	FEES 3 Annex 3, part 2	On or before the date the application is made
(i) [deleted]35 35	35	35
(j) [deleted]38	38	38
(k) [deleted]35 35	35	35
(l) [deleted]38	38 7 2	38
(m) [deleted]38	38 7 2	38
(n) Applicants to be added to the list of designated investment exchanges	50,000	On or before the date the application is made
2(o) In relation to a BIPRU firm, a firm applying to the FCA 29 for permission to use one of the advanced prudential calculation approaches listed in FEES 3 Annex 6 R (or guidance on its availability), including any future proposed amendments to those approaches.56 1 1 2 29 5 29 77 29 5 77 29 29 29 5 5 5 77 29 29 5 77 29 29 29 77 29 29 5	(1) Unless5 (2) applies, FEES 3 Annex 6.5 (2) (a) Unless5 (b) applies a1 firm submitting a second application for the permission or5 guidance described in column (1) within 12 months of the first application (where the fee was paid in accordance with (1)) must pay 50% of the fee applicable to it under FEES 3 Annex 6, but only in respect of that second application (b) No fee is payable by a firm in relation to a successful application for a permission5 based on a minded to grant decision in respect of the same matter following a complete application for guidance in accordance with prescribed submission requirements.1 56 5 2 5 1 2 5 5 5 77 5 77 5 5 2	Where the firm has made an application directly to the FCA 29, on or before the date the application is made, otherwise within 30 days after the FCA 29 notifies the firm that its EEA parent's Home State regulator has requested assistance.2 29 2 77 29 77 29 77
29(oa) Either: (i) a firm applying to the 37 FCA for permission to use one of the internal approaches listed in FEES 3 Annex 6A (or guidance on its availability), including any future proposed amendments to those approaches or (in the case of any application being made for such permission to the 37 FCA as consolidating supervisor under the UK CRR 58 56) any firm making such an application; or (ii) in the case of an application to the consolidating supervisor other than the 37 FCA for the use of the IRB approach and the consolidating supervisor requesting the 37 FCA's assistance in accordance with the UK CRR 58, any firm to which the 37 FCA would have to apply any decision to permit the use of that approach. 37 37 37 37 37	(1) Unless (2) applies, FEES 3 Annex 6A. (2) (a) Unless (b) applies a firm submitting a second application for the permission or guidance described in column (1) within 12 months of the first application (where the fee was paid in accordance with (1)) must pay 50% of the fee applicable to it under FEES 3 Annex 6A, but only in respect of that second application. (b) No fee is payable by a firm in relation to a successful application for a permission based on a minded to grant decision in respect of the same matter following a complete application for guidance in accordance with prescribed submission requirements. (c) No fee is payable where the consolidating supervisor has requested the assistance described in paragraph (oa)(ii) of column 1. 37	Where the firm has made an application directly to the 37 FCA , on or before the date the application is made, otherwise within 30 days after the 37 FCA notifies the firm that its EEA parent's consolidating supervisor has requested assistance. 37 37
(p) A firm applying for a variation of its Part 4A permission whose fee is not payable pursuant to sub- paragraphs 64(zza)52 or (zzh) 64 of this table 26	(1) Unless (2), (2A), (3), (3A), (3B), (3C), (3D) or 3(E)44 applies, if the proposed new1 business of the firm would1 fall within one or more activity groups specified in Part 1 of FEES 4 Annex 1AR not applicable before the application1, the fee is 50% of the highest of the tariffs set out in FEES 3 Annex 1R37 which apply to that application. (2) Subject to (2A) below, if the firm's application includes an application for a Part 4A permission to carry on a new credit-related regulated activity, the fee is 50% of the highest of the tariffs set out in FEES 3 Annex 1R37 that would be payable under (1) above or, if higher, 50% of the highest of the tariffs set out in FEES 3 Annex 1R37 that would be payable in relation to the new credit-related regulated activity 30.37 (2A) If an applicant which already has a Part 4A permission to carry on a credit-related regulated activity exclusively applies for a Part 4A permission to carry on a new credit-related regulated activity, that is specified in Part 3 of FEES 3 Annex 1R37 in the straightforward category (or if it exclusively applies for a number of such permissions), the fee is £25030.37 (3) If the firm is in the A.1 fee-block at the date of the application and the variation involves adding any of the regulated activities of meeting of repayment claims or managing dormant account funds (including the investment of such funds), the fee is 50% of the fee in FEES 3 Annex 1 R that applies to that application11 (3A) If the applicant had a limited permission prior to the application to vary its Part 4A permission, 100% of the highest of the tariffs set out in FEES 3 Annex 1R37 which apply to that application30.37 (3B) If the applicant has a limited permission and its application exclusively relates to another limited permission, the fee is 030 (3C) If the applicant applies for registration under article 8(1) of the MCD Order at the same time as it applies for a variation of its Part 4A permission, the fee is the highest of the fees set out in FEES 3 Annex 10AR and the amount otherwise payable in (1), (2), (2A), (3), (3A) or (3B), or (4).79 (3D) No fee is payable if the applicant satisfies the criteria set out in FEES 4 Annex 2BR(5)(a).41 (4) 11 In all other cases, other than applications by credit unions, the fee payable is 250 for firms which are not, or are not seeking to become, a PRA-authorised person, and 125 for firms which are, or are seeking to become, a PRA-authorised person,77 unless the variation involves only the reduction (and no other increases) in the scope of a Part 4A permission in which case no fee is payable.1 (3E) The fee is 12,500 if the firm applying:44 (i) is an MTF operator and the proposed new business of the firm is to be an OTF operator; or44 (ii) is an OTF operator and the proposed new business of the firm is to be an MTF operator.44 30 79 41 30 79 79 1 77 77 37 77 37 79 79 37 1 37 30 30 23 37 37 37 11 37	On or before the date the application is made
30(pa) A person who makes an application under section 30(1) of the Consumer Credit Act 1974 which meets the conditions of article 33 (Variations at request of licensee where no determination made before 1 April 2014) of the Financial Services and Markets Act 2000 (Regulated Activities) (Amendment) (No 2) Order 2013 (the “relevant variation application”)	As (a) or 31(p) above, less any amount paid to the Office of Fair Trading in relation to the relevant variation application.	Within 30 days of the date of the invoice.
2(q) [deleted]38 7 7 13 78 13 78 7 7 22 22 7	38	38 3 3 3
2(r) [deleted]46	6 6	5 6 6
5(s) In the case of an insurance business transfer scheme, a transferor. Note - for the purpose of this paragraph an insurance business transfer scheme consists of a single transferor and a single transferee. Where however such a scheme is part of a single larger scheme, that larger scheme is treated as a single insurance business transfer scheme. If an insurance business transfer scheme includes more than one transferor in accordance with this paragraph, the transferors are liable to pay the fee under column (2) jointly.	Either (1) or (2) as set out below: (1) In the case of an insurance business transfer scheme involving long term insurance business, 20,00059; or (2) in the case of an insurance business transfer scheme not involving long term insurance business, 12,500.59 76 76 37 37 76 76 37 76 37	On or before any application is made for the appointment of a person as an independent expert. 37
6(t) [deleted]46 20
(u) [deleted]34 34	34	34
(v) [deleted]38 22 22	38	38
[deleted]35 35	35	35
(x)[deleted]38	38	38 8
8(y) An applicant for authorisation as an authorised payment institution under regulation 5 of the Payment Services Regulations	The highest of the tariffs set out in FEES 3 Annex 8 which apply to that application. Where an application only involves a simple change of legal status as set out in FEES 3 Annex 1 Part 6, the fee payable is 50% of the tariff that would otherwise be payable in FEES 3 Annex 8R.47	On or before the date the application is made.
47(ya) An applicant for registration as an account information service provider under regulation 17 of the Payment Services Regulations.	47FEES 3 Annex 8R, paragraph (2)(i). Where an application only involves a simple change of legal status as set out in FEES 3 Annex 1 Part 6, the fee payable is 50% of the tariff that would otherwise be payable in FEES 3 Annex 8R.	47On or before the date the application is made.
(z) An application by a small payment institution for authorisation as an authorised payment institution because regulation 16 47 of the Payment Services Regulations applies	The highest of the tariffs set out in FEES 3 Annex 8R which apply to that application.	On or before the date the application is made.
(za) An applicant for registration as a small payment institution under regulation 13 47 of the Payment Services Regulations	FEES 3 Annex 8R, paragraph (1). Where an application only involves a simple change of legal status as set out in FEES 3 Annex 1 R Part 6, the fee payable is 50% of the tariff that would otherwise be payable in FEES 3 Annex 8R.	On or before the date the application is made.
(zb) An authorised payment institution applying to vary its authorisation under regulation 5 47 of the Payment Services Regulations.	(1) If50 prior to the variation the authorised payment institution is authorised to carry on any one or more of the payment services falling50 within paragraph (f), 47 (g) or (h) of Part 1 of Schedule 1 to the Payment Services Regulations and the authorised payment institution is applying to extend its authorisation to include any one or more of the payment services in (a) to (e)50, the fee is 50% of the highest of the tariffs set out in FEES 3 Annex 8R which apply to that application. (2) Where the authorised payment institution 50 already has authorisation to provide payment services within any one or more of paragraphs (a) to (e) of Part 1 of Schedule 1 to the Payment Services Regulations and wishes to add one or more other services in (a) to (f);50 the fee payable is £47250 irrespective of the number of agents it has. 50(3) Where the authorised payment institution already has authorisation to provide payment services within any one or more of paragraphs (a) to (f) of Part 1 of Schedule 1 to the Payment Services Regulations and wishes to add one or both of the services in (g) and (h) the fee payable is £750, irrespective of the number of agents it has. (4)50 In cases where the variation involves only the reduction (and no increases) of the types of payment services to be carried on after the variation, no fee is payable. 47 47 47 47 47	On or before the date the application is made.
(zc) A small payment institution applying to vary its registration under regulation 13 47 of the Payment Services Regulations	(1)The 47 fee is 50% of the tariff 47set out in FEES 3 Annex 8R, paragraph (1). 47 (2) 47 In cases where the variation involves only the reduction (and no increases) of the types of payment services to be carried on after the variation, no fee is payable. 47 47	On or before the date the application is made.
(zd) 47	47	[deleted]47
(ze) Any person to which the Special Project Fee for restructuring applies under FEES 3 Annex 9.12 12	Special Project Fee for restructuring in accordance with FEES 3 Annex 9 .	30 days of the date of the invoice.9
(zf) [deleted]77 77	77	9 16 77
16(zg) An applicant for authorisation as an authorised electronic money institution under regulation 5 of the Electronic Money Regulations.	The amount set out in FEES 3 Annex 10 R. Where an application only involves a simple change of legal status as set out in FEES 3 Annex 1 R Part 6, the fee payable is 50% of the tariff that would otherwise be payable in FEES 3 Annex 10 R.	On or before the date the application is made.
16(zh) An applicant for registration as a small electronic money institution under regulation 12 of the Electronic Money Regulations.	The amount set out in FEES 3 Annex 10 R. Where an application only involves a simple change of legal status as set out in FEES 3 Annex 1 R Part 6, the fee payable is 50% of the tariff that would otherwise be payable in FEES 3 Annex 10 R.	On or before the date the application is made.
16(zi) An application by a small electronic money institution for authorisation as an authorised electronic money institution 14because regulation 16 of the Electronic Money Regulations applies.	The amount set out in FEES 3 Annex 10 R.	On or before the date the application is made.
16(zj) An authorised electronic money institution applying to vary its authorisation under regulation 8 of the Electronic Money Regulations.	50(1) Subject to (2) below, the fee is 50% of the tariff for an electronic money institution authorisation application set out in FEES 3 Annex 10R. 50(2) Where the authorised electronic money institution applies to vary its permission so as to be able to provide one or both of the payment services in paragraphs (g) and (h) of Part 1 of Schedule 1 to the Payment Services Regulations the fee payable is £750.	On or before the date the application is made.
16(zk) A small electronic money institution applying to vary its registration under regulation 12 of the Electronic Money Regulations.	The amount set out in FEES 3 Annex 10 R.	On or before the date the application is made.
15(zl) An applicant for recognition as an accredited body.	2,500	On or before the date the application is made.18
18(zm) An issuer applying for registration of a regulated covered bond.	(1) Unless (2) or (3)41 applies, 45,000. (2) In the case of a proposed covered bond or programme where the assets in the asset pool will consist primarily of UK residential mortgages, 25,000. (3) No fee is payable if the issuer satisfies the criteria set out in FEES 4 Annex 2BR(5)(b).41	On or before the date the application is made.
18(zn) An issuer who proposes to make a material change to the contractual terms of a regulated covered bond under RCB 3.5.4 D.	(1) Unless (2) applies 6,500.41 (2) No fee is payable if the issuer satisfies the criteria set out in FEES 4 Annex 2BR(5)(c).41	On or before the date the notification under RCB 3.5.4 D is made.21
21(zo) In the case of persons in respect of which the FCA has given notice of its intention to take, or appoint a competent person to take, any steps under CONRED 2.5.12R, either: (i) a Firm (as defined in CONRED 2.1.1R(1); or (ii) a person falling within CONRED 2.1.2R(1).	An amount equal to: (1) a sum determined by the number of hours, or part of an hour, taken by the FCA in relation to work conducted in taking steps under recorded on the FCA's systems, multiplied by the rate in FEES 3 Annex 9 (11)R; or (2) any amount invoiced to the FCA by a competent person in relation to any work carried out by that competent person in connection with its appointment by the FCA under CONRED 2.5.12R.	Within 30 days of the date of the invoice.
77(zp) A person in respect of which the FCA 37 has given notice of its intention to itself appoint a skilled person to provide it with a report pursuant to section 166(3)(b) of the Act and SUP 5.2. 37	Any amount invoiced to the FCA 37 by a skilled person in relation to any work carried out by that skilled person in connection with its appointment by the FCA 37 pursuant to section 166(3)(b) of the Act. 37	Within 30 days of the date of the invoice.
77(zq) A person in respect of which the FCA 37 has given notice of its intention to itself appoint a skilled person to collect or update information pursuant to section 166A(2)(b) of the Act. 37	Any amount invoiced to the FCA 37 by a skilled person in relation to any work carried out by that skilled person in connection with its appointment by the FCA 37 pursuant to section 166A(2)(b) of the Act. 37 37	Within 30 days of the date of the invoice.33
33(zr) [deleted]38	38	38
30(zs) Applicant for FCA permission for an agreement to be enforced under section 28A(3)(a) and/or money paid or property transferred under and agreement to be retained under 3128A(3)(b) of the Act	(1) If the application is for permission for an agreement to be enforced under section 28A(3)(a) of the Act and for permission for money paid or property transferred under an agreement to be retained under section 28A(3)(b) of the Act, the fee is 31£3,500 per type of agreement specified in the application.30 (2) If the application is for permission for an agreement to be enforced under section 28A(3)(a) of the Act only, the fee is £3,500 per type of agreement specified in the application.31 (3) If the application is for permission for money paid or property transferred under an agreement to be retained under section 28A(3)(b) of the Act only, the fee is £3,500 per type of agreement specified in the application.31 Where there are a number of agreements of the same type, only one fee is payable in respect of those agreements. A number of agreements are of the same type when those agreements are entered into on the same terms and conditions.	On or before the date the application is made.
(zt) An applicant for registration in the Financial Services Register under article 8(1) of the MCD Order. 79	Unless (1), or (2) applies, the fee as set out in FEES 3 Annex 10A. 79 (1) If the applicant is applying for a Part 4A permission at the same time as it applies for registration under article 8(1) of the MCD Order, the fee payable in row (a), column (2) paragraph (3) of this Table. 79 (2) If the applicant is applying for a variation of a Part 4A permission at the same time as it applies for registration under article 8(1) of the MCD Order, the fee payable in row (p), column 2 paragraph (3)(c) of this Table. 79	On or before the application is made.79
(zu)40 Any person to which the Designated Credit Reference Agencies and Finance Platform42 Fee applies under FEES 3 Annex 10B. 39	Designated Credit Reference Agencies and Finance Platform42 Fee in accordance with FEES 3 Annex 10B.	Within 30 days of the date of the invoice.
43(zv) Any firm that meets the test in FEES 3 Annex 10C(1)R(1) (PPI campaign fees).	The amount set out in FEES 3 Annex 10C(1) R(2).	Within 30 days of the date of the invoice.
45(zw) An applicant for authorisation under regulation 7 of the DRS Regulations, or the operator of a trading venue seeking verification of their compliance with the DRS Regulations 63 49 under regulation 8 of those regulations 63 or an applicant for variation of an authorisation under regulation 12 of the DRS Regulations. 63	Either (1), (2), or (3) applies as set out below: (1) If the applicant is applying for permission to operate one data reporting service, 5,000. (2) If the applicant is applying for permission to operate more than one data reporting services, 50% of the fee at (1) for each additional service plus the fee at (1). (3) If the applicant is applying for variation of an authorisation, 50% of the fee at (1) for each additional service.	On the date the application is made.
46(zx) (1) Unless (2) applies any person applying to connect to the market data processor system to make transaction reports directly to the FCA under MiFIR. (2) If a person has previously applied as stated in (zx)(1) above and has been connected then no further fee is payable for any further such applications.	1) 20,00063	On the date the application is made
46(zy) (1) Subject to (2) and (3) below, any person applying to connect to the market data processor system to provide markets data (other than transaction reports) under MAR 1056. (2) If a person has previously applied as stated in (zy)(1) above and has been connected then no further fee is payable for any further such applications in relation to reporting the same data. (3) If a person has previously applied as stated in (zy)(1) above and makes a further application in relation to the provision of different data then a separate fee is payable for such application. 49	10,00063 56	On the date the application is made.
51(zz) an applicant for registration under regulation 14 of the Risk Transformation Regulations as a protected cell company.	500	On or before the date the application is made.
52(zza) An application for authorisation as a regulated benchmark administrator.	The highest of the applicable tariffs set out in FEES 3 Annex 1R. Where an applicant intends to administer benchmarks falling into different complexity groupings, it will pay one fee only, for the highest category applied for. If, once authorised, a regulated benchmark administrator notifies the FCA of its intention to administer other/additional benchmarks no further application fee is payable (even if the other/additional benchmark falls into a higher complexity category).	On the date the application is made.
52(zzb) An application for recognition of an administrator in accordance with article 32 of the benchmarks regulation.	5,000	On the date the application is made.
52(zzc) An application for endorsement of a benchmark or family of benchmarks in accordance with article 33 of the benchmarks regulation.	1,500	On the date the application is made.
54(zzd) applications for claims management companies	(1) £1,200 for claims management companies with annual turnover of up to and including £1,000,000; and (2) £10,000 for claims management companies with annual turnover of over £1,000,000. Firms which already have Part 4A permissions and are applying to vary their permissions will receive a 50% reduction in the relevant fee.	On the date the application is made.
55(zze) An application for authorisation as a third party verifier	(1) Unless (2) applies, 1,500. (2) Firms which already have Part 4A permissions will not receive a 50% reduction in the authorisation fee.	On the date the application is made.
61(zzf) UK-based applicants for registration as a trade repository; a securitisation repository, or a third country applicant seeking recognition as a trade repository.	5,000 Applicants for registration as a trade repository who already hold registration as a securitisation repository, or vice versa, will receive a 50% discount on the relevant application fee. Applicants for registration as a trade repository to carry on activity for the purposes of UK SFTR who already hold registration as a trade repository under EMIR or vice versa, will receive a 50% discount on the relevant application fee.	On the date the application is made.
61(zzg) UK-based applicants for registration as a credit rating agency or a third country applicant seeking certification as a credit rating agency.	The fee set out in FEES 3 Annex 13R.	On the date the application is made.
64(zzh) Permission for (1) carrying on funeral plan distribution; (2) carrying out a funeral plan contract as provider; or (3) carrying out a funeral plan contract as provider and entering as provider into a funeral plan contract.	(1) The highest of the tariffs set out in FEES 3 Annex 1R part 3A which apply to that application, subject to (2) and (3) below. (2) Unless (3) below applies, where an applicant was carrying out any of the activities referred to in (zzh)(1)-(3) on 1 September 2021, and makes an application for permission for any of those activities after 1 November 2021, the application fees shall be: (a) £3,500 for (zzh)(1) or zzh(2); (b) £14,000 for (zzh)(3). (3) If an applicant which already has any of the permissions referred to in (zzh) applies to vary its permission, the application fees shall be: (a) £500 for (zzh)(1); (b) £1,250 for (zzh)(2); and (c) £5,000 for (zzh)(3).	On or before the application is made.
32Part 2: UKLA38 fees
(1) Fee payer	(2) Fee payable	(3) Due date
(a) (i) An issuer which has not made public its annual financial report before the latest time specified in DTR 4.1.3 R. (ii) An issuer which has not made public its half-yearly financial report before the latest time specified in DTR 4.2.2 R (2).	FEES 3 Annex 12R38	Within 30 days of the date of the invoice.
38(b) An applicant for approval as a sponsor.	FEES 3 Annex 12R	On or before the date the application is made.
38(c) For the purposes of48 the listing rules:48 (i)48 an issuer requesting approval of a document arising in relation to a specific event or transaction, which is not a significant transaction or a super transaction; or48 48(ii) an issuer or person applying for eligibility for listing of its securities.	FEES 3 Annex 12R	On or before the date that relevant document is first submitted to the FCA.
38(d) Under the Prospectus Rules or the Prospectus Regulation 60, an issuer or a person requesting approval or review of a document arising in relation to a specific event or transaction, which is not a significant transaction or a super transaction.	FEES 3 Annex 12R	On or before the date that relevant document is first submitted to the FCA.
38(e) An issuer requesting the approval or review of a document in connection with a super transaction.	FEES 3 Annex 12R	On or before the date that relevant document is first submitted to the FCA.
38(f) An issuer requesting the approval or review of a document in connection with a significant transaction.	FEES 3 Annex 12R	On or before the date that relevant document is first submitted to the FCA.
38(g) A person who requests the FCA’s approval of a document that includes a mineral expert’s report and who is a fee payer under one or more of the categories (c), (d), (e), and (f) above must additionally pay a fee under this category.	FEES 3 Annex 12R	On or before the date that relevant document is first submitted to the FCA.
38(h) An applicant for approval as a primary information provider.	FEES 3 Annex 12R	On or before the date the application is made.

[Note:Guidance on how a firm liable to pay a fee under both rows (s) and (ze) of this table for the same transaction should expect to be treated is set out in FEES 3 Annex 11 G.]19

BIPRU 13.5.9R01/01/2007

A firm must apply the CCR mark to market method to transactions with a non-linear risk profile or for payment legs and transactions with debt instruments as underlying if:(1) the firm does not have a CAD 1 model permission or a VaR model permission; or(2) where the firm does have a CAD 1 model permission or a VaR model permission but cannot determine the delta or the modified duration, respectively, with its CAD 1 model permission or VaR model permission.[Note: BCD Annex III Part

BIPRU 1.3.2G01/01/2021

(1) A firm may apply for 7a waiver in respect of:(a) the IRB approach;(b) [deleted]55(c) the CCR internal model method; and(d) the VaR model approach.(2) A firm should apply for a waiver if it wants to:(a) apply the CAD 1 model approach; or2(b) apply the master netting agreement internal models approach; or2(c) disapply consolidated supervision under BIPRU 8 for its UK consolidation group or non-UK sub-group7; or2(d) apply the treatment in BIPRU 2.1 (Solo-consolidation waiver);

Related provisions for BIPRU 7.9.6

Search Term(s)

Filter by Topics

Filter by Modules

Filter by Documents

Filter by Keywords

Effective Period

Similar To

Table of application, notification, vetting and other fees payable to the FCA32