Related provisions for GEN 1.1.2
Frequently asked questions about allocation of functions in SYSC 4.4.5 R
Question |
Answer |
|
1 |
Does an individual to whom a function is allocated under SYSC 4.4.5 R need to be an approved person? |
An individual to whom a function is allocated under SYSC 4.4.5 R will be performing the apportionment and oversight function (CF 8, see SUP 10A.7.1 R17) and an application must be made under section 59 of the Act for approval of the individual before the function is performed. There are exceptions from this in SUP 10A.117 (Approved persons - Application). 1717 |
2 |
If the allocation is to more than one individual, can they perform the functions, or aspects of the functions, separately? |
If the functions are allocated to joint chief executives under SYSC 4.4.5 R, column 2, they are expected to act jointly. If the functions are allocated to an individual under SYSC 4.4.5 R, column 2, in addition to individuals under SYSC 4.4.5 R, column 3, the former may normally be expected to perform a leading role in relation to the functions that reflects his position. Otherwise, yes. |
3 |
What is meant by "appropriately allocate" in this context? |
The allocation of functions should be compatible with delivering compliance with Principle 3, SYSC 4.4.3 R and SYSC 4.1.1 R. The appropriate regulator considers that allocation to one or two individuals is likely to be appropriate for most firms. |
4 |
If a committee of management governs a firm or group, can the functions be allocated to every member of that committee? |
Yes, as long as the allocation remains appropriate (see Question 3). If the firm also has an individual as chief executive, then the functions must be allocated to that individual as well under SYSC 4.4.5 R, column 2 (see Question 7). |
5 |
Does the definition of chief executive include the possessor of equivalent responsibilities with another title, such as a managing director or managing partner? |
Yes. |
6 |
Is it possible for a firm to have more than one individual as its chief executive? |
Although unusual, some firms may wish the responsibility of a chief executive to be held jointly by more than one individual. In that case, each of them will be a chief executive and the functions must be allocated to all of them under SYSC 4.4.5 R, column 2 (see also Questions 2 and 7). |
7 |
If a firm has an individual as chief executive, must the functions be allocated to that individual? |
Normally, yes, under SYSC 4.4.5 R, column 2. But if the firm is a body corporate and a member of a group, the functions may, instead of being allocated to the firm'schief executive, be allocated to a director or senior manager from the group responsible for the overall management of the group or of a relevant group division, so long as this is appropriate (see Question 3). Such individuals may nevertheless require approval under section 59 (see Question 1). If the firm chooses to allocate the functions to a director or senior manager responsible for the overall management of a relevant group division, the FSA would expect that individual to be of a seniority equivalent to or greater than a chief executive of the firm for the allocation to be appropriate. See also Question 14. |
8 |
If a firm has a chief executive, can the functions be allocated to other individuals in addition to the chief executive? |
Yes. SYSC 4.4.5 R, column 3, permits a firm to allocate the functions, additionally, to the firm's (or where applicable the group's) directors and senior managers as long as this is appropriate (see Question 3). |
9 |
What if a firm does not have a chief executive? |
Normally, the functions must be allocated to one or more individuals selected from the firm's (or where applicable the group's) directors and senior managers under SYSC 4.4.5 R, column 3. But if the firm: (1) is a body corporate and a member of a group; and (2) the group has a director or senior manager responsible for the overall management of the group or of a relevant group division; then the functions must be allocated to that individual (together, optionally, with individuals from column 3 if appropriate) under SYSC 4.4.5 R, column 2. |
10 |
What do you mean by "group division within which some or all of the firm's regulated activities fall"? |
A "division" in this context should be interpreted by reference to geographical operations, product lines or any other method by which the group's business is divided. If the firm's regulated activities fall within more than one division and the firm does not wish to allocate the functions to its chief executive, the allocation must, under SYSC 4.4.5 R, be to: (1) a director or senior manager responsible for the overall management of the group; or (2) a director or senior manager responsible for the overall management of one of those divisions; together, optionally, with individuals from column 3 if appropriate. (See also Questions 7 and 9.) |
11 |
How does the requirement to allocate the functions in SYSC 4.4.5 R apply to an overseas firm which is not an incoming EEA firm, incoming Treaty firm or UCITS qualifier? |
The firm must appropriately allocate those functions to one or more individuals, in accordance with SYSC 4.4.5 R, but: (1) The responsibilities that must be apportioned and the systems and controls that must be overseen are those relating to activities carried on from a UK establishment with certain exceptions (see SYSC 1 Annex 1.1.8R). Note that SYSC 1 Annex 1.1.10R does not extend the territorial scope of SYSC 4.4 for an overseas firm. (2) The chief executive of an overseas firm is the person responsible for the conduct of the firm's business within the United Kingdom (see the definition of "chief executive"). This might, for example, be the manager of the firm'sUK establishment, or it might be the chief executive of the firm as a whole, if he has that responsibility. The apportionment and oversight function applies to such a firm, unless it falls within a particular exception from the approved persons regime (see Question 1). |
12 |
How does the requirement to allocate the functions in SYSC 4.4.5 R apply to an incoming EEA firm or incoming Treaty firm? |
SYSC 1 Annex 1.1.1R(2) and SYSC 1 Annex 1.1.8R restrict the application of SYSC 4.4.5 R for such a firm. Accordingly: (1) Such a firm is not required to allocate the function of dealing with apportionment in SYSC 4.4.5R (1). (2) Such a firm is required to allocate the function of oversight in SYSC 4.4.5R (2). However, the systems and controls that must be overseen are those relating to matters which the appropriate regulator, as Host State regulator, is entitled to regulate (there is guidance on this in SUP 13A Annex 2). Those are primarily, but not exclusively, the systems and controls relating to the conduct of the firm's activities carried on from its UK branch. (3) Such a firm need not allocate the function of oversight to its chief executive; it must allocate it to one or more directors and senior managers of the firm or the firm'sgroup under SYSC 4.4.5 R, row (2). (4) An incoming EEA firm which has provision only for cross border services is not required to allocate either function if it does not carry on regulated activities in the United Kingdom; for example if they fall within the overseas persons exclusions in article 72 of the Regulated Activities Order. See also Questions 1 and 15. |
13 |
What about a firm that is a partnership or a limited liability partnership? |
The appropriate regulator envisages that most if not all partners or members will be either directors or senior managers, but this will depend on the constitution of the partnership (particularly in the case of a limited partnership) or limited liability partnership. A partnership or limited liability partnership may also have a chief executive (see Question 5). A limited liability partnership is a body corporate and, if a member of a group, will fall within SYSC 4.4.5 R, row (1) or (2). |
14 |
What if generally accepted principles of good corporate governance recommend that the chief executive should not be involved in an aspect of corporate governance? |
The Note to SYSC 4.4.5 R provides that the chief executive or other executive director or senior manager need not be involved in such circumstances. For example, the UK Corporate Governance Code5 recommends that the board of a listed company should establish an audit committee of non-executive directors to be responsible for oversight of the audit. That aspect of the oversight function may therefore be allocated to the members of such a committee without involving the chief executive. Such individuals may require approval under section 59 in relation to that function (see Question 1). 5 |
15 |
What about incoming electronic commerce activities carried on from an establishment in another EEA State with or for a person in the United Kingdom? |
SYSC does not apply to an incoming ECA provider acting as such. |
Articles 25 and 26 of the PD Regulation provide for the format of prospectuses and base prospectuses:
Format of the prospectus |
||
25.1 |
Where an issuer, an offeror or a person asking for the admission to trading on a regulated market chooses, according to [PR 2.2.1 R] to draw up a prospectus as a single document, the prospectus shall be composed of the following parts in the following order: |
|
(1) |
a clear and detailed table of contents; |
|
(2) |
the summary provided for in [section 87A(5) of the Act]; |
|
(3) |
the risk factors linked to the issuer and the type of security covered by the issue; |
|
(4) |
the other information items included in the schedules and building blocks according to which the prospectus is drawn up. |
|
2. |
Where an issuer, an offeror or a person asking for the admission to trading on a regulated market chooses, according to [LR 3.1.1 R], to draw up a prospectus composed of separate documents, the securities note and the registration document shall be each composed of the following parts in the following order: |
|
(1) |
a clear and detailed table of contents; |
|
(2) |
as the case may be, the risk factors linked to the issuer and the type of security covered by the issue; |
|
(3) |
the other information items included in the schedules and building blocks according to which the prospectus is drawn up. |
|
3. |
In the cases mentioned in paragraphs 1 and 2, the issuer, the offeror or the person asking for admission to trading on a regulated market shall be free in defining the order in the presentation of the required information items included in the schedules and building blocks according to which the prospectus is drawn up. |
|
4. |
Where the order of the items does not coincide with the order of the information provided for in the schedules and building blocks according to which the prospectus is drawn up, the [FCA] may ask the issuer, the offeror or the person asking for the admission to trading on a regulated market to provide a cross reference list for the purpose of checking the prospectus before its approval. Such list shall identify the pages where each item can be found in the prospectus. [see PR 3.1.1 R (3)2] 2 |
|
5. |
Where the summary of a prospectus must be supplemented according to [section 87G of the Act], the issuer, the offeror or the person asking for admission to trading on a regulated market shall decide on a case-by-case basis whether to integrate the new information in the original summary by producing a new summary, or to produce a supplement to the summary. |
|
If the new information is integrated in the original summary, the issuer, the offeror or the person asking for admission to trading on a regulated market shall ensure that investors can easily identify the changes, in particular by way of footnotes. |
||
2In any case, a new filing of final terms and summary of the individual issue annexed thereto corresponding to offers made prior to the production of a new summary or a supplement to the summary shall not be required. |
Format of the base prospectus and its related final terms |
||
26.1 |
Where an issuer, an offeror or a person asking for the admission to trading on a regulated market chooses, according to [PR 2.2.7 R] to draw up a base prospectus, the base prospectus shall be composed of the following parts in the following order: |
|
(1) |
a clear and detailed table of contents; |
|
(2) |
the summary provided for in [section 87A of the Act]; |
|
(3) |
the risk factors linked to the issuer and the type of security or securities covered by the issue(s); |
|
(4) |
the other information items included in the schedules and building blocks according to which the prospectus is drawn up. |
|
2. |
Notwithstanding paragraph 1, the issuer, the offeror or the person asking for admission to trading on a regulated market shall be free in defining the order in the presentation of the required information items included in the schedules and building blocks according to which the prospectus is drawn up. The information on the different securities contained in the base prospectus shall be clearly segregated. |
|
3. |
Where the order of the items does not coincide with the order of the information provided for by the schedules and building blocks according to which the prospectus is drawn up, the [FCA] may ask the issuer, the offeror or the person asking for admission to trading on a regulated market to provide a cross reference list for the purpose of checking the prospectus before its approval. Such list should identify the pages where each item can be found in the prospectus. [see PR 3.1.1 R (3)2] 2 |
|
4. |
In case the issuer, the offeror or the person asking for admission to trading on a regulated market has previously filed a registration document for a particular type of security and, at a later stage, chooses to draw up base prospectus in conformity with the conditions provided for in [PR 2.2.7 R], the base prospectus shall contain: |
|
(1) |
the information contained in the previously or simultaneously filed and approved registration document which shall be incorporated by reference, following the conditions provided for in Article 28 of this Regulation; |
|
(2) |
the information which would otherwise be contained in the relevant securities note less the final terms where the final terms are not included in the base prospectus. |
|
5. |
The final terms shall be presented in the form of a separate document or be included in the base prospectus. The final terms shall be prepared in an easily analysable and comprehensible form.2 2 |
|
The items of the relevant securities note schedule and its building blocks, which are included in the base prospectus shall not be reproduced in the final terms.2 2 |
||
The issuer, the offeror or the person asking for admission to trading on a regulated market may include any of the additional information set out in Annex XXI in the final terms.2 2 |
||
2A clear and prominent statement shall be inserted in the final terms indicating: |
||
(a) |
that the final terms have been prepared for the purpose of Article 5(4) of Directive 2003/71/EC and must be read in conjunction with the base prospectus and its supplement(s); |
|
(b) |
where the base prospectus and its supplement(s) are published in accordance with Article 14 of Directive 2003/71/EC; |
|
(c) |
that in order to get the full information both the base prospectus and the final terms must be read in conjunction; |
|
(d) |
that a summary of the individual issue is annexed to the final terms. |
|
The final terms may include the signature of the legal representative of the issuer or the person responsible for the prospectus according to the relevant national law or the signature of both. |
||
5a |
The final terms and the summary of the individual issue shall be drawn up in the same language respectively as the approved version of the form of the final terms of the base prospectus and as the summary of the base prospectus. |
|
When the final terms are communicated to the competent authority of the host Member State or, if there is more than one host Member State, to the competent authorities of the host Member States, in accordance with Article 5(4) of Directive 2003/71/EC, the following language rules shall apply to the final terms and the annexed summary: |
||
(a) |
where the summary of the base prospectus is to be translated pursuant to Article 19 of Directive 2003/71/EC, the summary of the individual issue annexed to the final terms shall be subject to the same translation requirements as the summary of the base prospectus; |
|
(b) |
where the base prospectus is to be translated pursuant to Article 19 of Directive 2003/71/EC, the final terms and the summary of the individual issue annexed thereto, shall be subject to the same translation requirements as the base prospectus. |
|
The issuer shall communicate those translations, together with the final terms, to the competent authority of the host Member State or, if there is more than one host Member State, to the competent authorities of the host Member States. |
||
6. |
Where a base prospectus relates to different securities, the issuer, the offeror or the person asking for admission to trading on a regulated market shall include a single summary in the base prospectus for all securities. The information on the different securities contained in the summary, however, shall be clearly segregated. |
|
7. |
Where the summary of a base prospectus must be supplemented according to [section 87G of the Act], the issuer, the offeror or the person asking for admission to trading on a regulated market shall decide on a case-by-case basis whether to integrate the new information in the original summary by producing a new summary, or by producing a supplement to the summary. |
|
If the new information is integrated in the original summary of the base prospectus by producing a new summary, the issuer, the offeror or the person asking for admission to trading on a regulated market shall ensure that investors can easily identify the changes, in particular by way of footnotes. |
||
8. |
Issuers, offerors or persons asking for admission to trading on a regulated market may compile in one single document two or more different base prospectuses. |
Schedule to the Recognition Requirements Regulations, paragraph 3
2(1) |
The [UK RIE] must ensure that the systems and controls used in the performance of its [relevant functions] are adequate, and appropriate for the scale and nature of its business. |
|
(2) |
Sub-paragraph (1) applies in particular to systems and controls concerning - |
|
(a) |
the transmission of information; |
|
(b) |
the assessment, mitigation and management of risks to the performance of the [UK RIE'srelevant functions]; |
|
(c) |
the effecting and monitoring of transactions on the [UK RIE]; |
|
(ca) |
the technical operation of the [UK RIE], including contingency arrangements for disruption to its facilities; |
|
(d) |
the operation of the arrangements mentioned in paragraph 4(2)(d); and |
|
(e) |
(where relevant) the safeguarding and administration of assets belonging to users of the [UK RIE's] facilities. |