Related provisions for BIPRU 7.10.86
1 - 20 of 25 items.
(1) [deleted]66(2) Stress and scenario analyses should, in the first instance, be aligned with the risk appetite of the firm, as well as the nature, scale and complexity of its business and of the risks that it bears. The6 calibration of the 6stress and scenario analyses should be reconciled to a clear statement setting out the premise upon which the firm's internal capital assessment under the overall Pillar 2 rule is based.66(3) [deleted]66(4) In identifying adverse circumstances
A firm should use the results of its stress testing and scenario analysis not only to assess capital needs, but also to decide if measures should be put in place to minimise the adverse effect on the firm if the risk covered by the stress or scenario test actually materialises. Such measures might be a contingency plan or might be more concrete risk mitigation steps.
6A firm is expected to determine where the scope of any stress test impacts upon its pension obligation risk and estimate how the relevant measure of pension obligation risk will change in the scenario in question. For example, in carrying out stress tests under GENPRU 1.2.42 R a firm must consider how a stress scenario, such as an economic recession, would impact on the firm's current obligations towards its pension scheme and any potential increase in those obligations. Risks
6A firm should include in the written record referred to in GENPRU 1.2.60 R a description of the broad business strategy ofthe insurance group, the UK consolidation group or the non-EEA sub-group of which it is a member, the group’s view of its principal risks and its approach to measuring, managing and controlling the risks. This description should include the role of stress testing, scenario analysis and contingency planning in managing risk at the solo and consolidated lev
(1) A firm must frequently conduct a rigorous programme of stress testing. The results of these tests must be reviewed by senior management and reflected in the policies and limits the firm sets.(2) The programme must particularly address:(a) concentration risk;(b) illiquidity of markets in stressed market conditions;(c) one way markets;(d) event and jump to default risks;(e) non linearity of products;(f) deep out of the money positions;(g) positions subject to the gapping of
Stress testing is a way of identifying the risk to a firm posed by a breakdown of model assumptions or by low-probability events. Where stress tests reveal unacceptable vulnerability to a given set of circumstances, a firm should take prompt steps to manage those risks appropriately, for example by hedging against the outcome or reducing the size of the firm'sexposure.
A firm must have procedures to assess and respond to the results produced from stress testing. In particular, stress testing results must be:(1) used to evaluate its capacity to absorb such losses or identify steps to be taken to reduce risk; and(2) communicated routinely to senior management and periodically to the governing body.
The obligation to conduct an ICAAP, includes requirements on a firm to:(1) carry out regularly assessments of the amounts, types and distribution of financial resources, capital resources and internal capital that it considers adequate to cover the nature and level of the risks to which it is or might be exposed (GENPRU 1.2.30 R to GENPRU 1.2.41 G (the overall Pillar 2 rule and related rules);(2) identify the major sources of risk to its ability to meet its liabilities as they
(1) This paragraph applies to a small3firm whose activities are simple and primarily not credit-related.3(2) In carrying out its ICAAP it could:(a) identify and consider that firm's largest losses over the last 3 to 5 years and whether those losses are likely to recur;(b) prepare a short list of the most significant risks to which that firm is exposed;(c) consider how that firm would act, and the amount of capital that would be absorbed, in the event that each of the risks identified
In relation to a firm whose activities are moderately complex, in carrying out its ICAAP, BIPRU 2.2.25 G (3) to (4) apply. In addition, it could:(1) having consulted the management in each major business line, prepare a comprehensive list of the major risks to which the business is exposed;(2) estimate, with the aid of historical data, where available, the range and distribution of possible losses which might arise from each of those risks and consider using shock stress tests
The countervailing factors and off-setting actions that a firm may rely on as referred to in BIPRU 2.2.44 G include, but are not limited to, projected balance sheet shrinkage, growth in capital resources resulting from retained profits between the date of the stress test and the projected start of the economic downturn, the possibility of raising new capital in a downturn, the ability to reduce dividend payments or other distributions, and the ability to allocate capital from
(1) BIPRU 2.2.49 G to BIPRU 2.2.70 G set out guidance for:(a) a bank or building society;(b) an asset management firm; and(c) a securities firm;whose activities are either simple or moderately complex.(2) BIPRU 2.2.49 G to BIPRU 2.2.70 G provide examples of the sorts of risks which such a firm might typically face and of stress tests or scenario analyses which it might carry out as part of its ICAAP.(3) The material on securities firms is also relevant to a commoditiesfirm.
In assessing its wholesale funding risk, a firm must:(1) identify its wholesale liabilities;(2) determine how those liabilities behave under normal financial conditions;(3) assess how they will behave under the stresses required by BIPRU 12.5.6R; and(4) divide its wholesale liabilities into funding which the firm assesses as having a higher than average likelihood of withdrawal in response to actual or perceived changes in the firm's credit-worthiness (Type A wholesale funding)
In assessing how its liabilities behave under stress, the firm should categorise its liabilities according to value, maturity and estimated speed of outflow. The firm should bear in mind that wholesale funding risk may crystallise as an acute loss of funds in the short term, or as a longer-term gradual leakage of funds, or as both.
As part of its business planning and risk management obligations under SYSC, a firm must reverse stress test its business plan; that is, it must carry out stress tests and scenario analyses that test its business plan to failure. To that end, the firm must:(1) identify a range of adverse circumstances which would cause its business plan to become unviable and assess the likelihood that such events could crystallise; and(2) where those tests reveal a risk of business failure that
(1) An authorised fund manager of a UCITS scheme or a UK UCITS management company of an EEA UCITS scheme must adopt adequate and effective arrangements, processes and techniques in order to:(a) measure and manage at any time the risks to which that UCITS is or might be exposed; and(b) ensure compliance with limits concerning global exposure and counterparty risk, in accordance with COLL 5.2.11B R (Counterparty risk and issuer concentration) and COLL 5.3 (Derivative exposure).(2)
For the purposes of SYSC 12.1.8 R, the question of whether the risk management processes and internal control mechanisms are adequate, sound and appropriate should be judged in the light of the nature, scale and complexity of the group's business and of the risks that the group bears. Riskmanagement processes must include the stress testing and scenario analysis required by GENPRU 1.2.42 R and GENPRU 1.2.49R (1)(b).4
4The financial risk assessment should be based on a methodology which provides a reasonable estimate of the potential business losses which a UK RIE might incur in stressed but plausible market conditions. The FCA5 would expect a UK RIE to carry out a financial risk assessment at least once in every twelve-month period, or more frequently if there are material changes in the nature, scale or complexity of the UK RIE's operations or its business plans that suggest such financial
The following information must be disclosed by a firm which calculates its market risk capital requirement using a VaR model:(1) for each sub-portfolio covered:(a) the characteristics of the models used;(b) a description of stress testing applied to the sub-portfolio;(c) a description of the approaches used for back-testing 2and validating the accuracy and consistency of the internal models and modelling processes;(d) 2for the capital charges calculated according to the incremental
(1) The appropriate regulator considers that, while the firm'sgoverning body is ultimately responsible for risk governance throughout the business, firms should consider establishing a governing body risk committee to provide focused support and advice on risk governance.(2) Where a firm has established a governing body risk committee, its responsibilities will typically include:(a) providing advice to the firm'sgoverning body on risk strategy, including the oversight of current
SUP 4.3.13 R is not intended to be exhaustive of the professional advice that a firm should take whether from an actuary appointed under this chapter or from any other actuary acting for the firm. Firms should consider what systems and controls are needed to ensure that they obtain appropriate professional advice on financial and risk analysis; for example:11(1) risk identification, quantification and monitoring;1(2) stress and scenario testing;1(3) ongoing financial conditions;1(4)