Related provisions for BIPRU 4.7.1
1 - 20 of 84 items.
Subject to BIPRU 3.4.4 R, exposures to central governments and central banks for which a credit assessment by a nominated ECAI is available must be assigned a risk weight according to the table in BIPRU 3.4.3 R in accordance with the assignment by the FSA in accordance with the Capital Requirements Regulations 2006 of the credit assessments of eligible ECAIs to six steps in a credit quality assessment scale.[Note: BCD Annex VI Part 1 point 2]
This table belongs to BIPRU 3.4.2 R.
1 |
2 |
3 |
4 |
5 |
6 |
|
0 % |
20 % |
50 % |
100 % |
100 % |
150 % |
When the competent authorities of a third country which apply supervisory and regulatory arrangements at least equivalent to those applied in the EEA assign a risk weight which is lower than that indicated in BIPRU 3.4.1 R to BIPRU 3.4.3 R to exposures to their central government and central bank denominated and funded in the domestic currency, a firm may risk weight such exposures in the same manner.[Note: BCD Annex VI Part 1 point 5]
An export credit agency credit assessment may be recognised by a firm for the purpose of determining the risk weight to be applied to an exposure under the standardised approach if either of the following conditions is met:(1) the credit assessment is a consensus risk score from export credit agencies participating in the OECD "Arrangement on Guidelines for Officially Supported Export Credits"; or(2) the export credit agency publishes its credit assessments, and the export credit
This table belongs to BIPRU 3.4.8 R.
MEIP |
0 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
0% |
0% |
20% |
50% |
100% |
100% |
100% |
150% |
Without prejudice to BIPRU 3.4.15 R to BIPRU 3.4.19 R:(1) a firm must risk weightexposures to regional governments and local authorities in accordance with BIPRU 3.4.11 R to BIPRU 3.4.14 R; and(2) the preferential treatment for short-term exposures specified in BIPRU 3.4.37 R, BIPRU 3.4.39 R and BIPRU 3.4.44 R must not be applied.[Note: BCD Annex VI Part 1 point 8]
(1) Exposures to regional governments and local authorities must be assigned a risk weight according to the credit quality step to which exposures to the central government of the jurisdiction in which the regional government or local authority is established are assigned in accordance with the table in BIPRU 3.4.12 R.(2) Exposures to an unrated regional government or local authority must not be assigned a risk weight lower than that applied to exposures to its central government.[Note:
This table belongs to BIPRU 3.4.11 R.
Credit quality step to which central government is assigned |
1 |
2 |
3 |
4 |
5 |
6 |
20% |
50% |
100% |
100% |
100% |
150% |
The FSA will include a regional government or local authority in the list in BIPRU 3 Annex 2 R where there is no difference in risk between exposures to that body and exposures to the central government of the United Kingdom because of the specific revenue-raising powers of the regional government or local authority, and the existence of specific institutional arrangements the effect of which is to reduce the risk of default.[Note: BCD Annex VI Part 1 point 9]
A firm must treat an exposure to a regional government or local authority of an EEA State other than the United Kingdom as an exposure to the central government in whose jurisdiction that regional government or local authority is established if that regional government or local authority is included on the list of regional governments and local authorities drawn up by the competent authority in that EEA State under a CRD implementation measure with respect to point 9 of Part 1
Exposures to churches or religious communities constituted in the form of a legal person under public law must, in so far as they raise taxes in accordance with legislation conferring on them the right to do so, be treated as exposures to regional governments and local authorities, except that BIPRU 3.4.15 R and BIPRU 3.4.17 R do not apply.[Note: BCD Annex VI Part 1 point 10]
When competent authorities of a third country jurisdiction which apply supervisory and regulatory arrangements at least equivalent to those applied in the EEA treat exposures to regional governments and local authorities as exposures to their central government, a firm may risk weightexposures to such regional governments and local authorities in the same manner.[Note: BCD Annex VI Part 1 point 11]
In exceptional circumstances a firm may treat an exposure to a public sector entity established in the United Kingdom as an exposure to the central government of the United Kingdom if there is no difference in risk between exposures to that body and exposures to the central government of the United Kingdom because of the existence of an appropriate guarantee by the central government.[Note: BCD Annex VI Part 1 point 15]
Where a competent authority of another EEA State implements points 14 or 15 of Part 1 of Annex VI of the Banking Consolidation Directive by exercising the discretion to treat exposures to public sector entities as exposures to institutions or as exposures to the central government of the EEA State concerned, a firm may risk weightexposures to the relevant public sector entities in the same manner.[Note: BCD Annex VI Part 1 point 16]
When competent authorities of a third country jurisdiction, which apply supervisory and regulatory arrangements at least equivalent to those applied in the EEA, treat exposures to public sector entities as exposures to institutions, a firm may risk weightexposures to the relevant public sector entities in the same manner.[Note: BCD Annex VI Part 1 point 17]
Without prejudice to BIPRU 3.4.28 R to BIPRU 3.4.29 R:(1) a firm must treat exposures to multilateral development banks in the same manner as exposures to institutions in accordance with BIPRU 3.4.34 R to BIPRU 3.4.39 R (Exposures to institutions: credit assessment based method); and(2) the preferential treatment for short-term exposures specified in BIPRU 3.4.37 R, BIPRU 3.4.39 R and BIPRU 3.4.44 R must not be applied.[Note: BCD Annex VI Part 1 point 19]
Without prejudice to BIPRU 3.4.33 R to BIPRU 3.4.47 R, exposures to financial institutions authorised and supervised by the competent authorities responsible for the authorisation and supervision of credit institutions and subject to prudential requirements equivalent to those applied to credit institutions must be risk weighted as exposures to institutions.[Note: BCD Annex VI Part 1 point 24]
Exposures to institutions with an original effective maturity of more than three months for which a credit assessment by a nominated ECAI is available must be assigned a risk weight according to the table in BIPRU 3.4.35 R in accordance with the assignment by the FSA in accordance with the Capital Requirements Regulations 2006 of the credit assessments of eligible ECAIs to six steps in a credit quality assessment scale.[Note: BCD Annex VI Part 1 point 29]
This table belongs to BIPRU 3.4.34 R.
1 |
2 |
3 |
4 |
5 |
6 |
|
20% |
50% |
50% |
100% |
100% |
150% |
Exposures to an institution with an original effective maturity of three months or less for which a credit assessment by a nominated ECAI is available must be assigned a risk weight according to the table in BIPRU 3.4.38 R in accordance with the assignment by the FSA in accordance with the Capital Requirements Regulations 2006 of the credit assessments of eligible ECAIs to six steps in a credit quality assessment scale.[Note: BCD Annex VI Part 1 point 31]
This table belongs to BIPRU 3.4.37 R.
1 |
2 |
3 |
4 |
5 |
6 |
|
20% |
20% |
20% |
50% |
50% |
150% |
If there is a short-term credit assessment as set out in BIPRU 3.4.112 R and such an assessment determines the application of a more favourable or identical risk weight than the use of the general preferential treatment for short-term exposures, as specified in BIPRU 3.4.37 R, then the short-term assessment and risk weighting specified in BIPRU 3.4.112 R must be used for that specific exposure only. Other short-term exposures must follow the general preferential treatment for
If there is a short-term credit assessment as set out in BIPRU 3.4.112 R and such an assessment determines a less favourable risk weight than the use of the general preferential treatment for short-term exposures, as specified in BIPRU 3.4.37 R, then the general preferential treatment for short-term exposures must not be used and all unrated short-term claims must be assigned the same risk weight as that applied by the specific short-term assessment.[Note: BCD Annex VI Part 1
A firm may assign to an exposure to an institution formed under the law of the United Kingdom of a residual maturity of 3 months or less denominated and funded in pounds sterling a risk weight that is one category less favourable than the preferential risk weight, as described in BIPRU 3.4.5 R (Exposures in the national currency of the borrower), assigned to exposures to the central government of the United Kingdom.[Note: BCD Annex VI Part 1 point 37]
(1) Where a competent authority of another EEA State implements point 37 of Part 1 of Annex VI of the Banking Consolidation Directive by exercising the discretion to allow the treatment in that point, a firm may assign to the relevant national currency exposures the risk weight permitted by that CRD implementation measure.(2) When the competent authority of a third country which applies supervisory and regulatory arrangements at least equivalent to those applied in the EEA assigns
Where an exposure to an institution is in the form of minimum reserves required by the European Central Bank or by the central bank of an EEA State to be held by the firm, a firm may assign the risk weight that would be assigned to exposures to the central bank of the EEA State in question provided:(1) the reserves are held in accordance with Regulation (EC) No. 1745/2003 of the European Central Bank of 12 September 2003 or a subsequent replacement regulation or in accordance
Exposures for which a credit assessment by a nominated ECAI is available must be assigned a risk weight according to the table in BIPRU 3.4.51 R in accordance with the assignment by the FSA in accordance with the Capital Requirements Regulations 2006 of the credit assessments of eligible ECAIs to six steps in a credit quality assessment scale.[Note: BCD Annex VI Part 1 point 41]
Without prejudice to BIPRU 3.4.85 R, an exposure or any part of an exposure fully and completely secured, to the satisfaction of the firm, by mortgages on residential property which is or shall be occupied or let by the owner or the beneficial owner in the case of personal investment companies must be assigned a risk weight of 35%.[Note: BCD Annex VI Part 1 point 45]
Exposures fully and completely secured, to the satisfaction of the firm, by shares in Finnish residential housing companies, operating in accordance with the Finnish Housing Company Act of 1991 or subsequent equivalent legislation, in respect of residential property which is or shall be occupied or let by the owner must be assigned a risk weight of 35%.[Note: BCD Annex VI Part 1 point 46]
Without prejudice to BIPRU 3.4.85 R, an exposure or any part of an exposure to a tenant under a property leasing transaction concerning residential property under which the firm is the lessor and the tenant has an option to purchase, must be assigned a risk weight of 35% provided that the firm is satisfied that the exposure of the firm is fully and completely secured by its ownership of the property.[Note: BCD Annex VI Part 1 point 47]
If a CRD implementation measure of another EEA State exercises the discretion in point 49 of Part 1 of Annex VI of the Banking Consolidation Directive to dispense with the condition corresponding to BIPRU 3.4.60 R (3) (The risk of the borrower should not materially depend upon the performance of the underlying property or project) , a firm may apply a risk weight of 35% to such exposures fully and completely secured by mortgages on residential property situated in that EEA State.[Note:
For the purposes of BIPRU 3.4.66 R (1)(d) and (e), the review of a property valuation is more in-depth than the normal monitoring process required by BIPRU 3.4.66 R (1)(a). This requirement is likely to include a review of the property value on an individual exposure basis. Where an exposure is secured by multiple properties, the review can be undertaken at the level of the exposure, rather than at the level of each individual property.
A firm may not treat an exposure as fully and completely secured by residential property located in the United Kingdom for the purpose of BIPRU 3.4.56 R or BIPRU 3.4.58 R unless the amount of the exposure or of the secured part of the exposure referred to in BIPRU 3.4.56 R or BIPRU 3.4.58 R, as the case may be, is 80% or less of the value of the residential property on which it is secured.
(1) The application of BIPRU 3.4.81 R may be illustrated by an example. If a firm has a mortgage exposure of £100,000 secured on residential property in the United Kingdom that satisfies the criteria listed in BIPRU 3.4.56 R to BIPRU 3.4.80 R and the value of that property is £100,000, then £80,000 of that exposure may be treated as fully and completely secured and risk weighted at 35%. The remaining £20,000 may be risk weighted at 75% provided the exposure meets the criteria
A firm may only treat an exposure as fully and completely secured by residential property situated in another EEA State for the purposes of BIPRU 3.4.56 R or BIPRU 3.4.58 R if it would be treated as fully and completely secured by the relevant CRD implementation measures in that EEA State implementing points 45 and 47 of Part 1 of Annex VI of the Banking Consolidation Directive.
For the purposes of BIPRU 3.4.56 R or BIPRU 3.4.58 R, a firm may only treat an exposure as fully and completely secured by residential property situated in the territory of a third-country competent authority that is listed as equivalent for credit risk in BIPRU 8 Annex 6 R3 if it would be treated as fully and completely secured under the applicable requirements of that third-country competent authority (including any applicable loan-to-value ceiling).3
For the purposes of BIPRU 3.4.56 R or BIPRU 3.4.58 R, where the residential property in question is situated in the territory of a third-country competent authority that is not listed as equivalent for credit risk in BIPRU 8 Annex 3 R:(1) a firm must not treat an exposure as fully and completely secured by the residential property in question unless the value of the property exceeds the exposures by a substantial margin, which must be at least 20%;(2) the firm must apply a risk
For the purposes of BIPRU 3.4.85 R (1) and in order to satisfy itself that an exposure is fully and completely secured by the relevant property, a firm should make its own assessment of the appropriate margin in each case, using its knowledge of the market in the relevant country and of its own portfolio.
If an exposure is secured on property that is used in part for residential purposes in accordance with BIPRU 3.4.56 R and partly for commercial purposes (such as a farm, public house, guest house or shop) it may be treated as secured by residential real estate if the firm can demonstrate that the property's main use is, or will be, residential and that the value of the property is not significantly affected by its commercial use.
Exposures or any part of an exposure secured by mortgages on offices or other commercial premises which cannot properly be considered to fall within any other standardised credit risk exposure class or to qualify for a lower risk weight under BIPRU 3 must be assigned a risk weight of 100%.[Note: BCD Annex VI Part 1 point 51]
Exposures fully and completely secured by shares in Finnish housing companies, operating in accordance with the Finnish Housing Company Act of 1991 or subsequent equivalent legislation, in respect of offices or other commercial premises may be assigned a risk weight of 50%.[Note: BCD Annex VI Part 1 point 52]
If a CRD implementation measure in another EEA State implements the discretion in point 51 of Part 1 of Annex VI of the Banking Consolidation Directive, a firm may apply the same treatment as that CRD implementation measure to exposures falling within the scope of that CRD implementation measure which are fully and completely secured by mortgages on offices or other commercial premises situated in that EEA State.[Note: BCD Annex VI Part 1 points 51 and 57]
If a CRD implementation measure in another EEA State implements the discretion in point 53 of Part 1 of Annex VI of the Banking Consolidation Directive, a firm may apply the same treatment as that CRD implementation measure to exposures related to property leasing transactions concerning offices or other commercial premises situated in that EEA State and governed by statutory provisions whereby the lessor retains full ownership of the rented assets until the tenant exercises his
(1) If a CRD implementation measure in another EEA State implements the discretion in point 58 of Part 1 of Annex VI of the Banking Consolidation Directive to dispense with the condition in point 54(b) for exposures fully and completely secured by mortgages on commercial property situated in that EEA State, a firm may apply the same treatment as that CRD implementation measure to exposures fully and completely secured by mortgages on commercial property situated in that EEA State
Without prejudice to the provisions contained in BIPRU 3.4.97 R to BIPRU 3.4.101 R, the unsecured part of any item that is past due for more than 90 days (irrespective of the amount of that item or of the unsecured portion of that item) must be assigned a risk weight of:(1) 150% if value adjustments are less than 20% of the unsecured part of the exposure gross of value adjustments; and(2) 100% if value adjustments are no less than 20% of the unsecured part of the exposure gross
For the purposes of BIPRU 3.4.97 R, the secured portion of a past due item is dealt with under BIPRU 5 (Credit risk mitigation). A firm may treat the secured portion of an exposure covered by a mortgage indemnity product that meets the relevant CRM eligibility criteria as secured for the purposes of BIPRU 3.4.97 R. The risk weight to be applied to the secured portion is determined under BIPRU 5.7.21 R to BIPRU 5.7.24 R. The risk weight of the unsecured portion is determined in
Exposures indicated in BIPRU 3.4.56 R to BIPRU 3.4.63 R (Exposures secured by mortgages on residential property) must be assigned a risk weight of 100% net of value adjustments if they are past due for more than 90 days. If value adjustments are no less than 20% of the exposure gross of value adjustments, the risk weight to be assigned to the remainder of the exposure is 50%.[Note: BCD Annex VI Part 1 point 64]
The application of BIPRU 3.4.96 R and BIPRU 3.4.99 R may be illustrated on the basis of a £110,000 loan on a property valued at £100,000, where £80,000 of the loan is secured and £30,000 of the exposure is unsecured and provisions of £20,000 are taken:(1) Option 1 (application of BIPRU 3.4.96 R):(a) provision of £20,000 taken on £80,000 secured exposure;(b) provision exceeds 20%, so the firm should risk weight the remaining £60,000 secured exposure at 50%;(c) the risk weight to
Non past due items to be assigned a 150% risk weight under BIPRU 3.4 and for which value adjustments have been established may be assigned a risk weight of:(1) 100% if value adjustments are no less than 20% of the exposure value gross of value adjustments; and(2) 50%, if value adjustments are no less than 50% of the exposure value gross of value adjustments.[Note: BCD Annex VI Part 1 point 67]
(1) Covered bonds means covered bonds as defined in paragraph (1) of the definition in the glossary (Definition based on Article 22(4) of the UCITS Directive) and collateralised by any of the following eligible assets:(a) exposures to or guaranteed by central governments, central bank, public sector entities, regional governments and local authorities in the EEA;(b) (i) exposures to or guaranteed by non-EEA central governments, non-EEAcentral banks, multilateral development banks,
Covered bonds must be assigned a risk weight on the basis of the risk weight assigned to senior unsecured exposures to the credit institution which issues them. The following correspondence between risk weights applies:(1) if the exposures to the institution are assigned a risk weight of 20%, the covered bond must be assigned a risk weight of 10%;(2) if the exposures to the institution are assigned a risk weight of 50%, the covered bond must be assigned a risk weight of 20%;(3)
Short-term exposures to an institution or corporate for which a short-term credit assessment by a nominated ECAI is available must be assigned a risk weight according to the table in BIPRU 3.4.113 R in accordance with the mapping by the FSA in accordance with the Capital Requirements Regulations 2006 of the credit assessments of eligible ECAIs to six steps in a credit quality assessment scale.[Note: BCD Annex VI Part 1 point 73]
Table: Short-term exposures on an institution or corporate for which a short-term credit assessment by a nominated ECAI is available
This table belongs to BIPRU 3.4.112 R.
1 |
2 |
3 |
4 |
5 |
6 |
|
20% |
50% |
100% |
150% |
150% |
150% |
Exposures in the form of CIUs for which a credit assessment by a nominated ECAI is available must be assigned a risk weight according to the table in BIPRU 3.4.117 R in accordance with the assignment by the FSA in accordance with the Capital Requirements Regulations 2006 of the credit assessments of eligible ECAIs to six steps in a credit quality assessment scale.[Note: BCD Annex VI Part 1 point 75]
Table: Exposures in the form of CIUs for which a credit assessment by a nominated ECAI is available
This table belongs to BIPRU 3.4.116 R.
1 |
2 |
3 |
4 |
5 |
6 |
|
20% |
50% |
100% |
100% |
150% |
150% |
Where a firm is not aware of the underlying exposures of a CIU, it may calculate an average risk weight for the CIU in accordance with the standardised approach subject to the following rules: it will be assumed that the CIU first invests, to the maximum extent allowed under its mandate, in the standardised credit risk exposure classes attracting the highest capital requirement, and then continues making investments in descending order until the maximum total investment limit
Where a firm provides credit protection for a number of exposures under terms that the nth default among the exposures triggers payment and that this credit event terminates the contract, and where the product has an external credit assessment from an eligible ECAI the risk weights prescribed in BIPRU 9 must be assigned. If the product is not rated by an eligible ECAI, the risk weights of the exposures included in the basket must be aggregated, excluding n-1 exposures, up to a
Each exposure must be assigned to one of the following exposure classes:(1) claims or contingent claims on central governments and central banks;(2) claims or contingent claims on institutions;(3) claims or contingent claims on corporates;(4) retail claims or contingent retail claims;(5) equity claims;(6) securitisation positions; and(7) non credit-obligation assets.[Note: BCD Article 86(1)]
The risk weighted exposure amounts for credit risk for exposures belonging to one of the exposure classes referred to in (1) to (4) must, unless deducted from capital resources, be calculated in accordance with the following provisions:(1) for exposures in the sovereign, institution and corporate IRB exposure class, BIPRU 4.4.57 R to BIPRU 4.4.60 R, BIPRU 4.4.79 R, BIPRU 4.5.8 R to BIPRU 4.5.10 R (for specialised lending exposures), BIPRU 4.9.3 R and BIPRU 4.8.16 R to BIPRU 4.8.17
The calculation of risk weighted exposure amounts for credit risk and dilution risk must be based on the relevant parameters associated with the exposure in question. These include probability of default (PD), loss given default (LGD), maturity (M) and the exposure value of the exposure. PD and LGD may be considered separately or jointly, in accordance with the provisions relating to PD and LGD in BIPRU 4.4, BIPRU 4.6, BIPRU 4.7 and BIPRU 4.8 at:(1) for exposures in the sovereign,
The expected loss amounts for exposures belonging to one of the IRB exposure classes referred to in (1) to (3) must be calculated in accordance with the methods set out in the following provisions:(1) for exposures in the sovereign, institution and corporate IRB exposure class, BIPRU 4.4.61 R to BIPRU 4.4.62 R and (for specialised lending exposures) BIPRU 4.5.13 R to BIPRU 4.5.15R;(2) for exposures in the retail exposure class, BIPRU 4.6.47 R to BIPRU 4.6.48 R;(3) for exposures
The calculation of expected loss amounts in accordance with BIPRU 4.3.6 R must be based on the same input figures of PD, LGD and the exposure value for each exposure as being used for the calculation of risk weighted exposure amounts in accordance with BIPRU 4. For defaultedexposures,where a firm uses its own estimate of LGDs, EL must be the firm's best estimate of expected loss (ELBE), for the defaultedexposure in accordance with BIPRU 4.3.122 R.[Note:BCD Article 88(2)]
The expected loss amounts calculated in accordance with BIPRU 4.3.6 R (1), BIPRU 4.3.6 R (2) and BIPRU 4.3.6 R (4) must be subtracted from the sum of value adjustments and provisions related to these exposures. Discounts on balance sheet exposures purchased when in default according to BIPRU 4.4.71 R must be treated in the same manner as value adjustments. Expected loss amounts for securitised exposures and value adjustments and provisions related to these exposures must not be
The credit risk control unit must be independent from the personnel and management functions responsible for originating or renewing exposures and report directly to senior management. The unit must be responsible for the design or selection, implementation, oversight and performance of the rating systems. It must regularly produce and analyse reports on the output of the rating systems.[Note:BCD Annex VII Part 4 point 128]
A firm must document the design and operational details of its rating systems. The documentation must evidence compliance with the minimum IRB standards and the firm'sIRB permission, and address topics including portfolio differentiation, rating criteria, responsibilities of parties that rate obligors and exposures, frequency of assignment reviews, and management oversight of the rating process.[Note:BCD Annex VII Part 4 point 31]
Where a firm employs statistical models in the rating process, the firm must document its methodologies. This material must:(1) provide a detailed outline of the theory, assumptions and/or mathematical and empirical basis of the assignment of estimates to grades, individual obligors, exposures, or pools, and the data source(s) used to estimate the model;(2) establish a rigorous statistical process (including out-of-time and out-of-sample performance tests) for validating the model;
A rating system comprises all of the methods, processes, controls, data collection and IT systems that support the assessment of credit risk, the assignment of exposures to grades or pools (rating), and the quantification of default and loss estimates for a certain type of exposure.[Note:BCD Annex VII Part 4 point 1]
A firm must have in place sound stress testing processes for use in the assessment of its capital adequacy. Stress testing must involve identifying possible events or future changes in economic conditions that could have unfavourable effects on the firm's credit exposures and assessment of the firm's ability to withstand such changes.[Note:BCD Annex VII Part 4 point 40]
(1) A firm must regularly perform a credit risk stress test to assess the effect of certain specific conditions on its total capital requirements for credit risk. The test to be employed must be one chosen by the firm. The test to be employed must be meaningful and reasonably conservative. Stressed portfolios must contain the vast majority of a firm's total exposures covered by the IRB approach.(2) The stress test must be designed to assess the firm's ability to meet its capital
A firm must take all relevant information into account in assigning obligors and facilities to grades or pools. Information must be current and must enable the firm to forecast the future performance of the exposure. The less information a firm has, the more conservative must be its assignments of exposures to obligor and facility grades or pools. If a firm uses an external rating as a primary factor determining an internal rating assignment, the firm must ensure that it considers
(1) This paragraph contains guidance on BIPRU 4.3.43 R and more general guidance about the governance of rating systems.(2) In determining the assignment referred to in BIPRU 4.3.43 R, a firm should have regard to the sensitivity of the rating to movements in fundamental risk drivers.(3) A firm should, for any rating system, be able to demonstrate that it acts appropriately or has an appropriate policy, as applicable, with respect to:(a) any deficiencies caused by its not being
For grade and pool assignments a firm must document the situations in which human judgement may override the inputs or outputs of the assignment process and the personnel responsible for approving these overrides. A firm must document these overrides and the personnel responsible. A firm must analyse the performance of the exposures whose assignments have been overridden. This analysis must include assessment of the performance of exposures whose rating has been overridden by
(1) This paragraph applies to the use of statistical models and/or other mechanical methods to assign exposures to obligor grades, obligor pools, facility grades or facility pools.(2) A firm must be able to demonstrate to the FSA that the model has good predictive power and that capital requirements are not distorted as a result of its use.(3) The input variables to the model must form a reasonable and effective basis for the resulting predictions. The model must not have material
(1) This paragraph contains guidance on BIPRU 4.3.51 R (7).(2) BIPRU 4.3.51 R (7) does not require that each individual assignment of an exposure to a pool or grade should be the subject of an open-ended review by reference to factors not covered by the model if:(a) that is not necessary in order to meet the requirements of BIPRU 4 about the ability of the rating system to predict and to discriminate (as referred to in BIPRU 4.3.29 R to BIPRU 4.3.30 R (Validation of internal estimates));
(1) This paragraph contains guidance on BIPRU 4.3.51 R for the use of external models.(2) BIPRU 4.3.51 R (2) - BIPRU 4.3.51 R (8) also apply to mechanical methods to assign exposures or obligors to facility grades or pools and to a combination of models and mechanical methods.(3) The standards which a firm applies to an external model should not be lower than those for internal models. (4) The FSA will not accredit any individual model or vendor. The burden is on a firm to satisfy
The following provisions also apply with respect to the definition of default:(1) for overdrafts, days past due commence once an obligor has breached an advised limit, has been advised a limit smaller than current outstandings, or has drawn credit without authorisation and the underlying amount is material;(2) an advised limit means a limit which has been brought to the knowledge of the obligor;(3) days past due for credit cards commence on the minimum payment due date;(4) in
(1) This paragraph contains guidance on the definition of default.(2) If:(a) a firm ordinarily assigns exposures in the sovereign, institution and corporate IRB exposure class to a member of a group substantially on the basis of membership of that group and a common group rating; and(b) the firm does so in the case of a particular group;(3) the firm should consider whether members of that group should be treated as a single obligor for the purpose of the definition of default.(4)
(1) Elements to be taken as indications of unlikeliness to pay must include the items set out in this rule.(2) The firm putting the credit obligation on non-accrued status must be taken as an indication of unlikeliness to pay.(3) The firm making a value adjustment resulting from a significant perceived decline in credit quality subsequent to the firm taking on the exposure must be taken as an indication of unlikeliness to pay.(4) The firm selling the credit obligation at a material
(1) The realisation or forfeiture of collateral may be taken as an indication of unlikeliness to pay for the purposes of the definition of default.(2) However, the realisation or forfeiture of collateral may not indicate unlikeliness to pay:(a) in the case of an exposure in a market (such as one that involves retail exposures involving margin lending) in which it is established practice for collateral to be sold if its value falls below a certain percentage of the exposure and
(1) If an obligor approach is being taken with respect to retail exposures (that is, the application of the definition of default at an obligor level rather than at a facility level as set out in BIPRU 4.6.21 R,) a firm should ensure that the PD associated with unsecured exposures is not understated as a result of the presence of any collateralised exposures. A firm should be able to explain to the FSA, if asked, how it has ensured that its estimate of PD is appropriate for both
If a firm considers that a previously defaultedexposure is such that no trigger of default continues to apply, the firm must rate the obligor or facility as it would for a non-defaultedexposure. Should the definition of default subsequently be triggered, another default must be deemed to have occurred.[Note:BCD Annex VII Part 4 point 47]
If a firm uses a rating model to assign exposures to the borrower or facility grades, it may reflect the data on main drivers of risk parameters by its inclusion in the model as a risk driver or as part of a subsequent process that adjusts the output of that model to calculate the risk parameters PD, LGD, conversion factor and EL.
The population of exposures represented in the data used for estimation, the lending standards used when the data was generated and other relevant characteristics must be comparable with those of a firm'sexposures and standards. A firm must also be able to demonstrate to the FSA that the economic or market conditions that underlie the data are relevant to current and foreseeable conditions. The number of exposures in the sample and the data period used for quantification must
A firm should be able to demonstrate to the FSA:(1) how, with respect to each rating system, both assignment of ratings and estimates of PD, LGD and conversion factors are affected by:(a) movements in the economic cycle; and(b) other cyclical effects which are material to levels of default, loss or the amount of exposures at default for the exposures covered by the rating system; and(2) the level of conservatism inherent in its ratings, as provided for by BIPRU.
(1) If:(a) a firm's internal experience of exposures of a type covered by a model or other rating system is 20 defaults or fewer; and(b) in the firm's view, reliable estimates of PD cannot be derived from external sources of default data, including the use of market price related data, for all the exposures covered by the rating system;the firm must estimate PD for exposures covered by that rating system in accordance with this rule.(2) A firm must use a statistical technique
(1) A firm's estimates of LGDs must take into account:(a) data in respect of relevant incomplete workouts; and(b) the possibility that the proportion of defaultedexposures which are cured (as referred to in BIPRU 4.3.71 R) or restructured (as referred to in BIPRU 4.3.63 R (5)) or the length of the period over which a firm makes recoveries under a defaultedexposure may be different from the firm's observed historic experience.(2) An incomplete workout as referred to in (1)(a) means
A firm may derive the LGD in accordance with BIPRU 4.3.104 R (2)(c) either by directly assigning to the facility grade or pool an estimate of LGD appropriate for downturn conditions, or alternatively by estimating a default weighted average LGD in accordance with BIPRU 4.3.99 R and BIPRU 4.3.76 R and converting it into an LGD appropriate for downturn conditions by the use of a formula. It should be able to demonstrate that that formula produces well-founded estimates of LGDs consistent
Where a firm is able to demonstrate that the effect is immaterial in accordance with BIPRU 4.1.25 R (Compliance), it may exclude defaultedexposures that have been cured (as referred to in BIPRU 4.3.67 G (1)) or restructured (as referred to in BIPRU 4.3.63 R (5)) from the data about default and loss experience on which LGDs are calculated provided it can demonstrate that its calculation of capital requirements (including capital requirements resulting from the application of capital
The methods that a firm uses for discounting cash flows for the purposes of estimating LGDs must take account of the uncertainties associated with the receipt of recoveries with respect to a defaulted exposure. If a firm intends to use a discount rate that does not take full account of the uncertainty in recoveries, it must be able to explain by what other process it has taken into account that uncertainty for the purposes of calculating LGDs.
For the specific case of exposures already in default, a firm must use the sum of its best estimate of expected loss for each exposure given current economic circumstances and exposure status and the possibility of additional unexpected losses during the recovery period.[Note:BCD Annex VII Part 4 point 80]
(1) A firm using own estimates of conversion factors should take into account all facility types that may result in an exposure when an obligor defaults, including uncommitted facilities.(2) A firm should treat a facility as an exposure from the earliest date at which a customer is able to make drawings under it.(3) To the extent that a firm makes available multiple facilities, it should be able to demonstrate:(a) how it deals with the fact that exposures on one may become exposures
(1) This paragraph contains guidance about the interpretation of the requirements relating to comparability in BIPRU 4.3.85 R. It is also relevant to the requirement for representative data in BIPRU 4.3.51 R (5), to the references to comparability in the additional guidance in BIPRU 4.3.53 G (7)(b) and to the requirements for similarity in BIPRU 4.3.92 R.(2) In general, comparability should be based on analyses of the population of exposures represented in the data, the lending
A firm may determine the exposure value for:(1) financial derivative instruments;(2) repurchase transactions;(3) securities or commodities lending or borrowing transactions;(4) margin lending transactions; and(5) long settlement transactionsusing the CCR internal model method.[Note: BCD Annex III Part 2 point 2]
In principle, the use of different measures of exposure within the CCR internal model method is possible within the same product category, including on a permanent basis. The FSA may allow a firm, through the CCR internal model method permission, to use a more conservative measure of exposure that is less risk sensitive (for instance a measure based on conservative haircuts) for certain parts of the business if justified on a cost-benefit basis. However, a firm would still need
The FSA may, through the CCR internal model method permission, require a firm to apply a multiplier to the measures of exposures coming out of a less risk-sensitive approach to calculating exposures as referred to in BIPRU 13.6.15 G where the FSA considers this to be appropriate due to the complexity of the business or the nature of the risks involved.
(1) A firm must measure the exposure value at the level of the netting set.(2) The model must specify the forecasting distribution for changes in the market value of the netting set attributable to changes in market variables, such as interest rates, foreign exchange rates.(3) The model must then compute the exposure value for the netting set at each future date given the changes in the market variables.(4) For margined counterparties, the model may also capture future collateral
A firm must compute effective EPE by estimating expected exposure (EEt) as the average exposure at future date t, where the average is taken across possible future values of relevant market risk factors. The model estimates EE at a series of future dates t1, t2, t3, etc.[Note: BCD Annex III Part 6 point 7 third part]
For the purposes of 2BIPRU 13.6.25 R2 :2(1) effective EPE is the average effective EE during the first year of future exposure;(2) if all contracts in the netting set mature within less than one year, effective EPE2 is the average of effective EE2 until all contracts in the netting set mature.22[Note: BCD Annex III Part 6 point 9, first part]
A firm must compute effective EPE as a weighted average of effective EE:Effective EPE = (k=1min(1 year;maturity))((Effective EEtk)*(tk))where:the weights ?tk = tk tk-1 allow for the case when future exposure is calculated at dates that are not equally spaced over time.[Note: BCD Annex III Part 6 point 9, second part]
If a firm'sCCR internal model method permission permits it, the firm may use its own estimates of , subject to a floor of 1.2, where must equal the ratio of internal capital from a full simulation of CCRexposure across counterparties (numerator) and internal capital based on EPE (denominator).[Note: BCD Annex III Part 6 point 12 (part)]
For the purposes of BIPRU 13.6.33 R:(1) in the denominator, EPE must be used as if it were a fixed outstanding amount;(2) a firm must be able to demonstrate that its internal estimates of capture in the numerator material sources of stochastic dependency of distribution of market values of transactions or of portfolios of transactions across counterparties;(3) internal estimates of must take account of the granularity of portfolios.[Note: BCD Annex III Part 6 point 12 (part
If the netting set is subject to a margin agreement, a firm must use one of the following EPE measures:(1) effective EPE without taking into account the margin agreement;(2) the margin threshold, if positive, under the margin agreement plus an add-on that reflects the potential increase in exposure over the margin period of risk:(a) the add-on is computed as the expected increase in the netting set'sexposure beginning from a current exposure of zero over the margin period of risk;(b)
(1) The firm must have a control unit that is responsible for the design and implementation of its CCR management system, including the initial and on-going validation of the model.(2) This unit must control input data integrity and produce and analyse reports on the output of the firm's risk measurement model, including an evaluation of the relationship between measures of risk exposure and credit and trading limits.(3) This unit must be:(a) independent from units responsible
(1) A firm's risk management policies must take account of market risk, liquidity risk, and legal and operational risk that can be associated with CCR.(2) The firm must not undertake business with a counterparty without assessing its creditworthiness and must take due account of settlement and pre-settlement credit risk.(3) These risks must be managed as comprehensively as practicable at the counterparty level (aggregating CCRexposures with other credit exposures) and at the firm-wide
A firm must ensure that the daily reports prepared on its exposures to CCR are reviewed by a level of management with sufficient seniority and authority to enforce both reductions of positions taken by individual credit managers or traders and reductions in the firm's overall CCRexposure.[Note: BCD Annex III Part 6 point 21]
(1) A firm's measurement of CCR must include measuring daily and intra-day usage of credit lines.(2) The firm must measure current exposure gross and net of collateral.(3) At portfolio and counterparty level, the firm must calculate and monitor peak exposure or potential future exposure (PFE) at the confidence interval chosen by the firm.(4) The firm must take account of large or concentrated positions, including by groups of related counterparties, by industry, by market, etc.[Note:
The distribution of exposures1 generated by the model used to calculate effective EPE must be closely integrated into the day-to-day CCR management process of the firm. The model's output must accordingly play an essential role in the credit approval, CCR management, internal capital allocation, and corporate governance of the firm.[Note: BCD Annex III Part 6 point 27]
A firm must have a track record in the use of models that generate a distribution of exposures1 to CCR. Thus, the firm must be able to demonstrate that it has been using a model to calculate the distribution of exposures1 upon which the EPE calculation is based that meets, broadly, the minimum requirements set out in BIPRU 13.6 for at least one year prior to the date of its CCR internal model method permission.[Note: BCD Annex III Part 6 point 28]
(1) A firm must ensure that the model used to generate a distribution of exposures1 to CCR is part of a CCR management framework that includes the identification, measurement, management, approval and internal reporting of CCR. This framework must include the measurement of usage of credit lines (aggregating CCRexposures with other credit exposures) and internal capital allocation.(2) In addition to EPE, a firm must measure and manage current exposures.(3) Where appropriate, the
A firm must have the systems capability to estimate EE daily if necessary, unless it is able to demonstrate to the FSA that its exposures to CCR warrant less frequent calculation. The firm must compute EE along a time profile of forecasting horizons that adequately reflects the time structure of future cash flows and maturity of the contracts and in a manner that is consistent with the materiality and composition of the exposures.[Note: BCD Annex III Part 6 point 30]
(1) Exposure must be measured, monitored and controlled over the life of all contracts in the netting set (not just to the one year horizon).(2) A firm must have procedures in place to identify and control the risks for counterparties where the exposure rises beyond the one-year horizon.(3) A firm must input the forecast increase in exposure into the firm's internal capital model.[Note: BCD Annex III Part 6 point 31]
(1) A firm must have in place sound stress testing processes for use in the assessment of capital adequacy for CCR.(2) These stress measures must be compared with the measure of EPE and considered by the firm as part of the process set out in GENPRU 1.2.42 R.(3) Stress testing must also involve identifying possible events or future changes in economic conditions that could have unfavourable effects on a firm's credit exposures and an assessment of the firm's ability to withstand
(1) A firm must stress test its CCRexposures, including jointly stressing market risk and credit risk factors.(2) In its stress tests of CCR, a firm must consider concentration risk (to a single counterparty or groups of counterparties), correlation risk across market risk and credit risk, and the risk that liquidating the counterparty's positions could move the market.(3) In its stress tests a firm must also consider the impact on its own positions of such market moves and integrate
A firm must ensure that:(1) the model reflects transaction terms and specifications in a timely, complete, and conservative fashion;(2) such terms include at least:(a) contract notional amounts;(b) maturity;(c) reference assets;(d) margining arrangements; and(e) netting arrangements;(3) the terms and specifications are maintained in a database that is subject to formal and periodic audit;(4) the process for recognising netting arrangements requires:(a) signoff by legal staff
A firm must ensure that:(1) the model employs current market data to compute current exposures;(2) when using historical data to estimate volatility and correlations, at least three years of historical data are used and updated quarterly or more frequently if market conditions warrant;(3) the data covers a full range of economic conditions, such as a full business cycle;(4) a unit independent from the business unit validates the price supplied by the business unit;(5) the data
A firm must ensure that the model is subject to a validation process which:(1) is clearly articulated in firms' policies and procedures;(2) specifies the kind of testing needed to ensure model integrity(3) identifies conditions under which assumptions are violated and may result in an understatement of EPE; and(4) includes a review of the comprehensiveness of the model.[Note: BCD Annex III Part 6 point 38]
A firm must monitor the appropriate risks and have processes in place to adjust its estimation of EPE when those risks become significant. This includes the following:(1) the firm must identify and manage its exposures to specific wrong-way risk;(2) for exposures with a rising risk profile after one year, the firm must compare on a regular basis the estimate of EPE over one year with EPE over the life of the exposure; and(3) for exposures with a residual maturity below one year,
(1) A firm'sCCR internal model method model must meet the validation requirements in (2) to (8).(2) The qualitative validation requirements set out in BIPRU 7.10 must be met.(3) Interest rates, foreign currency rates, equity prices, commodities, and other market risk factors must be forecast over long time horizons for measuring CCRexposure. The performance of the forecasting model for market risk factors must be validated over a long time horizon.(4) The pricing models used to
(1) This section applies with respect to the sovereign, institution and corporate IRB exposure class.(2) The sovereign, institution and corporate IRB exposure class includes specialised lending exposures.(3) Both BIPRU 4.4 and BIPRU 4.5 (Specialised lending exposures) apply to specialised lending exposures. A firm may calculate risk weighted exposure amounts for a specialised lending exposure either:(a) (if it is able to do so) in accordance with BIPRU 4.4; or(b) in accordance
The following exposures must be treated as exposures to central governments and central banks:(1) exposures to regional governments, local authorities or public sector entities which are treated as exposures to central governments under the standardised approach; and(2) exposures to multilateral development banks and international organisations which attract a risk weight of 0% under the standardised approach.[Note:BCD Article 86(2)]
The following exposures must be treated as exposures to institutions:(1) exposures to regional governments and local authorities which are not treated as exposures to central governments under the standardised approach;(2) exposures to public sector entities which are treated as exposures to institutions under the standardised approach;(3) exposures to multilateral development banks which do not attract a 0% risk weight under the standardised approach; and(4) without prejudice
An obligor grade means for the purpose of BIPRU 4 as it applies to the sovereign, institution and corporate IRB exposure class a risk category within a rating system's obligor rating scale, to which obligors are assigned on the basis of a specified and distinct set of rating criteria, from which estimates of PD are derived. A firm must document both the relationship between obligor grades in terms of the level of default risk each grade implies and the criteria used to distinguish
Separate exposures to the same obligor must be assigned to the same obligor grade, irrespective of any differences in the nature of each specific transaction. Exceptions, where separate exposures are allowed to result in multiple grades for the same obligor are:(1) country transfer risk, this being dependent on whether the exposures are denominated in local or foreign currency;(2) where the treatment of associated guarantees to an exposure may be reflected in an adjusted assignment
In addition to complying with the material in BIPRU 4.3.54 R (Data maintenance) a firm must collect and store:(1) complete rating histories on obligors and recognised guarantors;(2) the dates the ratings were assigned;(3) the key data and methodology used to derive the rating;(4) the person responsible for the rating assignment;(5) the identity of obligors and exposures that defaulted;(6) the date and circumstances of such defaults;(7) data on the PDs and realised default rates
(1) This rule, in accordance with BIPRU 4.3.57 R (4) (Definition of default), sets the exact number of days past due that a firm should abide by in the case of exposures to PSEs.(2) For counterparts that are PSEs situated within the United Kingdom the number of days past due is 180.(3) For counterparts that are PSEs situated in another EEA State the number of days past due is the lower of:(a) 180; and(b) the number of days past due fixed under the CRD implementation measure with
A firm must use the following LGD values:(1) senior exposures without eligible collateral, 45%;(2) subordinated exposures without eligible collateral, 75%;(3) a firm may recognise funded and unfunded credit protection in the LGD in accordance with BIPRU 5 (Credit risk mitigation), as modified by BIPRU 4.10;(4) covered bonds may be assigned an LGD value of 12.5%; and(5) for certain senior corporate exposure purchased receivables, for certain subordinated corporate exposure purchased
(1) The exposure value for the items set out in this rule must be calculated as the committed but undrawn amount multiplied by the applicable conversion factor set out in this rule.(2) For credit lines which are uncommitted, that are unconditionally cancellable at any time by the firm without prior notice, or that effectively provide for automatic cancellation due to deterioration in a borrower's credit worthiness, a conversion factor of 0 % applies. To apply a conversion factor
For all off-balance sheet items other than mentioned in BIPRU 4.4.37 R, BIPRU 4.4.45 R, BIPRU 4.4.71 R - BIPRU 4.4.78 R, BIPRU 4.6.44 R, BIPRU 4.8.28 R and BIPRU 4.8.29 R, the exposure value must be the following percentage of its value:(1) 100% if it is a full risk item;(2) 50% if it is a medium risk item;(3) 20% if it is a medium/low risk item; and(4) 0% if it is a low risk item.For the purposes of this rule the off-balance sheet items must be assigned to risk categories as
1Notwithstanding BIPRU 4.4.34 R and BIPRU 4.8.25 R, if a firm'sIRB permission permits it to use own LGD estimates under the advanced IRB approach for exposures to which BIPRU 4 applies and permits it to use the approach in this rule, unfunded credit protection may be recognised by adjusting PD and/or LGD estimates subject to the minimum IRB standards. A firm must not assign guaranteed exposures an adjusted PD or LGD such that the adjusted risk weight would be lower than that of
1If a firm uses its own estimates of conversion factors under the advanced IRB approach it must calculate the exposure value of off-balance sheet exposures calculated with the use of conversion factors by using its own estimates of conversion factors across different product types as mentioned in BIPRU 4.4.37 R and BIPRU 4.4.39 R (2) to BIPRU 4.4.39 R (4).[Note:BCD Annex VII Part 3 point 9 (part)]
1A facility grade means for the purpose of the advanced IRB approach a risk category within a rating system's facility scale to which exposures are assigned on the basis of a specified and distinct set of rating criteria from which own estimates of LGDs are derived. The grade definition must include both a description of how exposures are assigned to the grade and of the criteria used to distinguish the level of risk across grades.[Note:BCD Annex VII Part 4 point 10]
1For a firm permitted to use own estimates of LGDs or conversion factors under the advanced IRB approach, each exposure must be assigned to a facility grade as part of the credit approval process. This is in addition to the requirements in BIPRU 4.4.11 R - BIPRU 4.4.13 R.[Note:BCD Annex VII Part 4 point 20]
1As well as complying with BIPRU 4.3.54 R and BIPRU 4.4.21 R (Data maintenance), a firm using own estimates of LGDs and/or conversion factors under the advanced IRB approach must collect and store:(1) complete histories of data on the facility ratings and LGD and conversion factor estimates associated with each rating scale3;(2) the dates the ratings were assigned and the estimates were done;(3) the key data and methodology used to derive the facility ratings and LGD and conversion
Subject to BIPRU 4.4.59 R to BIPRU 4.4.60 R, BIPRU 4.5.6 R, BIPRU 4.5.8 R - BIPRU 4.5.10 R (Risk weights for specialised lending), BIPRU 4.8.16 R, BIPRU 4.8.17 R (Risk weights for corporate exposure purchased receivables) and BIPRU 4.9.3 R (Securitisation: provision of credit protection), risk weighted exposure amounts must be calculated according to the formulae in the table in BIPRU 4.4.58 R and the adjustment formula in BIPRU 4.4.79 R (Double default).[Note:BCD Annex VII Part
Table: Formulae for the calculation of risk weighted exposure amounts
This table belongs to BIPRU 4.4.57 R
Correlation (R) |
0.12 × (1 - EXP(-50*PD))/(1-EXP(-50)) + 0.24* |
|
[1-(1-EXP(-50*PD))/(1-EXP(-50))] |
||
Maturity factor (b) |
(0.11852-0.05478*1n(PD))2 |
|
(1-1.5*b)-1*(1+(M-2.5)*b)*12.5*1.06 |
||
N(x) |
denotes the cumulative distribution function for a standard normal random variable (i.e. the probability that a normal random variable with mean zero and variance of one is less than or equal to x). G(z) denotes the inverse cumulative distribution function for a standard normal random variable (i.e. the value x such that N(x) = z). |
|
PD = 0 |
For PD = 0, RW shall be: 0 |
|
PD = 1 |
For PD = 1: |
|
(i) |
for defaultedexposures where a firm applies the LGD values set out in BIPRU 4.4.32R and BIPRU 4.8.25R RW shall be: 0; |
|
(ii) |
for defaultedexposures where a firm uses its own estimates of LGDs, RW shall be: Max {0, 12.5 *(LGD-ELBE)}; |
|
where ELBEmust be the firm's best estimate of expected loss for the defaultedexposure according to BIPRU 4.3.122 R. |
||
[Note:BCD Annex VII Part 1 point 3]
For exposures to companies where the total annual sales for the consolidated group of which the firm is a part is less than EUR 50 million a firm may use the following correlation formula for the calculation of risk weights for corporate exposures. In this formula S is expressed as total annual sales in millions of Euros with EUR 5 million < = S < = EUR 50 million. Reported sales of less than EUR 5 million must be treated as if they were equivalent to EUR 5 million. In accordance
3Table: Formulae for the calculation of expected loss amounts
This table belongs to BIPRU 4.4.61 R
Expected loss amount |
|
For defaultedexposures (PD = 1) where a firm uses its own estimates of LGDs, EL must be ELBE, the firm's best estimate of expected loss for the defaultedexposure according to BIPRU 4.3.122 R. |
|
For exposures subject to the treatment set out in BIPRU 4.4.79 R (Double default) EL must be 0. |
|
[Note:BCD Annex VII Part 1 point 30 (part)]
(1) A firm must calculate maturity (M) for each of the exposures referred to in this rule in accordance with this rule and subject to BIPRU 4.4.68 R to BIPRU 4.4.70 R. In all cases, M must be no greater than 5 years.(2) For an instrument subject to a cash flow schedule M must be calculated according to the following formula:where CFt denotes the cash flows (principal, interest payments and fees) contractually payable by the obligor in period t.(3) For derivatives subject to a
The last paragraph of paragraph 14 of Part 2 of Annex VII of the Banking Consolidation Directive says: "In addition, for other short-term exposures specified by the competent authorities which are not part of the credit institution's ongoing financing of the obligor, M shall be at least one-day. A careful review of the particular circumstances shall be made in each case." The FSA has not at this stage specified any such short-term exposure.[Note:BCD Annex VII Part 2 point 14
Unless provided otherwise in BIPRU 4 the exposure value of on-balance sheet exposures must be measured gross of value adjustments. This also applies to assets purchased at a price different than the amount owed. For purchased assets, the difference between the amount owed and the net value recorded on the balance-sheet of the firm is denoted discount if the amount owed is larger, and premium if it is smaller.[Note:BCD Annex VII Part 3 point 1]
The exposure value for leases must be the discounted minimum lease payments. Minimum lease payments are the payments over the lease term that the lessee is or can be required to make and any bargain option (i.e. option the exercise of which is reasonably certain). Any guaranteed residual value fulfilling the set of conditions in BIPRU 5.7.1 R (Eligibility), as modified by BIPRU 4.10.38 R and BIPRU 4.10.39 R (Unfunded credit protection: Eligibility of providers) regarding the eligibility
Where an exposure takes the form of securities or commodities sold, posted or lent under repurchase transactions or securities or commodities lending or borrowing transactions, long settlement transactions and margin lending transactions, the exposure value must be the value of the securities or commodities determined in accordance with GENPRU 1.3 (Valuation). Where the financial collateral comprehensive method is used, the exposure value must be increased by the volatility adjustment
Notwithstanding BIPRU 4.4.76 R, the exposure value of credit risk exposures outstanding, as determined by the firm, with a central counterparty must be determined in accordance with BIPRU 13.3.3 R and BIPRU 13.8.8 R (Exposure to central counterparty), provided that the central counterparty'sCCRexposures with all participants in its arrangements are fully collateralised on a daily basis.[Note:BCD Annex VII Part 3 point 8]
The risk weighted exposure amount for each exposure which meets the requirements set out in BIPRU 5.7.2 R and BIPRU 4.4.83 R (Double default) may be adjusted according to the following formula:(1) Risk weighted exposure amount = RW *exposure value * (0.15 + 160*PDpp)](2) PDpp = PD of the protection provider(3) RW must be calculated using the relevant risk weight formula set out in BIPRU 4.4.57 R for the exposure, the PD of the obligor and the LGD of a comparable direct exposure
Notwithstanding BIPRU 4.4.34 R and BIPRU 4.4.43 R, for the purposes of BIPRU 4.4.79 R, the LGD of a comparable direct exposure to the protection provider shall either be the LGD associated with an unhedged facility to the guarantor or the unhedged facility of the obligor, depending upon whether in the event both the guarantor and the obligor default during the life of the hedged transaction available evidence and the structure of the guarantee indicate that the amount recovered
An institution, an insurance undertaking (including an insurance undertaking that carries out reinsurance) or an export credit agency which fulfils the following conditions may be recognised as an eligible provider of unfunded credit protection which qualifies for the treatment set out in BIPRU 4.4.79 R:(1) the protection provider has sufficient expertise in providing unfunded credit protection;(2) the protection provider is regulated in a manner equivalent to the rules laid down
To be eligible for the treatment set out in BIPRU 4.4.79 R, credit protection deriving from a guarantee or credit derivative must meet the following conditions:(1) the underlying obligation must be to:(a) a corporate exposure, excluding an exposure to an insurance undertaking (including an insurance undertaking that carries out reinsurance); or(b) an exposure to a regional government, local authority or public sector entity which is not treated as an exposure to a central government
(1) Where the requirements of BIPRU 5.2.2 R - BIPRU 5.2.8 R are met the calculation of risk weighted exposure amounts, and, as relevant, expected loss amounts, may be modified in accordance with BIPRU 5 as modified by BIPRU 4.10.(2) No exposure in respect of which credit risk mitigation is obtained must produce a higher risk weighted exposure amount or expected loss amount than an otherwise identical exposure in respect of which there is no credit risk mitigation.(3) Where the
(1) The condition in BIPRU 4.10.6 R (3) does not apply for exposures secured by residential real estate property situated within the territory of another EEA State.(2) However (1) only applies if and to the extent that the CRD implementation measures for that EEA State in relation to the IRB approach implement the option set out in paragraph 16 of Part 1 of Annex VIII of the Banking Consolidation Directive (waiver for residential real estate property) with respect to residential
(1) For the recognition of receivables as collateral the requirements in this paragraph must be met.(2) The legal mechanism by which the collateral is provided must be robust and effective and ensure that the lender has clear rights over the proceeds.(3) A firm must take all steps necessary to fulfil local requirements in respect of the enforceability of security interests. There must be a framework which allows the lender to have a first priority claim over the collateral subject
(1) If a type of other physical collateral referred to in BIPRU 4.10.16 R is potentially eligible under a firm'sIRB permission a firm must only recognise it as eligible if the minimum requirements in (2) to (10) are met.(2) The collateral arrangement must be legally effective and enforceable in all relevant jurisdictions and must enable the firm to realise the value of the property within a reasonable timeframe.(3) With the sole exception of permissible prior claims referred to
(1) Where the requirements set out in this paragraph are met, exposures arising from transactions whereby a firm leases property to a third party must be treated the same as loans collateralised by the type of property leased.(2) For the exposures arising from leasing transactions to be treated as collateralised by the type of property leased, the following conditions must be met:(a) the conditions set out or referred to in BIPRU 4.10.13 R or BIPRU 4.10.18 R as appropriate for
Where the ratio of the value of the collateral (C) to the exposure value (E) is below a threshold level of C* (the required minimum collateralisation level for the exposure) as laid down in BIPRU 4.10.28 R, LGD* must be the LGD laid down in the other sections of BIPRU 4 for uncollateralised exposures to the counterparty.[Note: BCD Annex VIII Part 3 point 69]
Where the ratio of the value of the collateral to the exposure value exceeds a second, higher threshold level of C** (i.e. the required level of collateralisation to receive full LGD recognition) as laid down in BIPRU 4.10.28 R, LGD* must be that prescribed in that table.[Note: BCD Annex VIII Part 3 point 70]
Where the required level of collateralisation C** is not achieved in respect of the exposure as a whole, the exposure must be considered to be two exposures - that part in respect of which the required level of collateralisation C** is achieved and the remainder.[Note: BCD Annex VIII Part 3 point 71]
Table: Minimum LGD for secured portion of exposures
This table belongs to BIPRU 4.10.24 R - BIPRU 4.10.27 R
LGD* for senior claims or contingent claims |
LGD* for subordinated claims or contingent claims |
Required minimum collateralisation level of the exposure (C*) |
Required minimum collateralisation level of the exposure (C**) |
|
Receivables |
35% |
65% |
0% |
125% |
Residential real estate/commercial real estate |
35% |
65% |
30% |
140% |
Other collateral |
40% |
70% |
30% |
140% |
[Note: BCD Annex VIII Part 3 point 72 (part)]
(1) A firm may apply the treatment in paragraph 74 of Part 3 of Annex VIII of the Banking Consolidation Directive (50% risk weight for exposures secured by real estate) in respect of exposures collateralised by:(a) residential real estate property; or(b) commercial real estate property;located in the territory of another EEA State.(2) However (1)(a) or (1)(b) only applies if the CRD implementing measures for that EEA State with respect to the IRB approach have implemented the
(1) Where:(a) risk weighted exposure amounts and expected loss amounts are calculated under the IRB approach; and(b) an exposure is collateralised by both financial collateral and other eligible collateral;LGD* to be taken as the LGD for the purposes of the IRB approach must be calculated in accordance with this rule.(2) A firm must subdivide the volatility-adjusted value of the exposure (i.e. the value after the application of the volatility adjustment as set out in BIPRU 5.4.28
(1) This rule sets out how the calculations under BIPRU 5.6.11 R (Using the supervisory volatility adjustments or the own estimates volatility adjustments approaches to master netting agreements covering repurchase transactions and/or securities or commodities lending or borrowing transactions and/or other capital market driven transactions) must be modified under the IRB approach.(2) Where risk weighted exposure amounts and expected loss amounts are calculated under the IRB approach,
(1) This rule sets out how the calculations under BIPRU 5.6.24 R (Using the internal models approach to master netting agreements covering repurchase transactions and/or securities or commodities lending or borrowing transactions and/or other capital market driven transactions) must be modified under the IRB approach.(2) Where risk weighted exposure amounts and expected loss amounts are calculated under the IRB approach E is the exposure value for each separate exposure under
(1) This rule sets out how the calculations under BIPRU 5.6.29 R (Calculating risk-weighted exposure amounts and expected loss amounts for master netting agreements covering repurchase transactions and/or securities or commodities lending or borrowing transactions and/or other capital market driven transactions) must be modified under the IRB approach.(2) E* must be taken as the exposure value of the exposure to the counterparty arising from the transactions subject to the master
(1) This rule sets out how the calculations under BIPRU 5.4.28 R (Calculating adjusted values under the financial collateral comprehensive method) must be modified under the IRB approach.(2) E as referred to in the provisions listed in (1) is the exposure value as would be determined under the IRB approach if the exposure was not collateralised. For this purpose, where a firm calculates risk weighted exposure amounts under the IRB approach, the exposure value of the items listed
(1) This rule sets out the calculation of risk weighted exposure amounts2 and expected loss2 amounts under the financial collateral comprehensive method2 for a firm using the IRB approach.222(2) LGD* (the effective loss given default) calculated as set out in this paragraph must be taken as the LGD for the purposes of BIPRU 4.(3) LGD* = LGD x (E*/E) where:(a) LGD is the loss given default that would apply to the exposure under the IRB approach if the exposure was not collateralised;(b)
(1) In the case of a firm using the IRB approach to calculate risk weighted exposure amounts and expected loss amounts, the persons in (2) are added to the list in BIPRU 5.4.64 R (Definition of core market participant).(2) The persons referred to in (1) are other financial companies (including insurance companies) exposures to which do not have a credit assessment by an eligible ECAI and are internally rated as having a probability of default equivalent to that associated with
(1) In the case of a firm using the IRB approach in calculating risk weighted exposure amounts and expected loss amounts, the persons in (2) are added to the list in BIPRU 5.7.1 R (List of eligible providers of unfunded credit protection).(2) The persons referred to in (1) are other corporate entities, including parent undertakings, subsidiary undertakings and affiliate corporate entities of the firm, that do not have a credit assessment by an eligible ECAI and are internally
BIPRU 4.10.41 R to BIPRU 4.10.48 R set out the minimum requirements:(1) assessing the effect of guarantees and credit derivatives for:(a) exposures in the sovereign, institution and corporate IRB exposure class2 where the advanced IRB approach is being used to calculate LGDs; and(b) retail exposures; and(2) additionally, in the case of retail exposure guarantees, to the assignment of exposures to grades or pools, and the estimation of PD.[Note: BCD Annex VII Part 4 point 97]
The requirements in BIPRU 4.10.40 R (2) and BIPRU 4.10.42 R - BIPRU 4.10.48 R do not apply for guarantees provided by institutions and central governments and1 if the firm has received approval under BIPRU 4.2 to apply the standardised approach for exposures to such entities. In this case the requirements of BIPRU 5 (credit risk mitigation) apply.[Note: BCD Annex VII Part 4 point 96]
For recognised guarantors the same requirements as for obligors as set out in BIPRU 4.3.43 R - BIPRU 4.3.48 R (Assignment to grades and pools), BIPRU 4.4.11 R - BIPRU 4.4.18 R and BIPRU 4.4.51 R (Assignment of exposures and rating systems), BIPRU 4.5.6 R (Assignment of exposures) and BIPRU 4.6.11 R and BIPRU 4.6.14 R (Assignment of exposures and rating systems) apply.[Note: BCD Annex VII Part 4 point 99]
A firm must have clearly specified criteria for adjusting grades, pools or LGD estimates, and in the case of retail exposures and eligible purchased receivables, the process of allocating exposures to grades or pools, to reflect the impact of guarantees for the calculation of risk weighted exposure amounts. These criteria must comply with the minimum requirements referred to in BIPRU 4.10.43 R.[Note: BCD Annex VII Part 4 point 101]
The minimum requirements for guarantees set out in BIPRU 4.10 also apply for single name credit derivatives. In relation to a mismatch between the underlying obligation and the reference obligation of the credit derivative or the obligation used for determining whether a credit event has occurred the requirements set out under BIPRU 5.7.14 R (Mismatches and credit derivatives) apply. For retail exposures and eligible purchased receivables, this paragraph applies to the process
(1) This rule relates to the calculation of risk-weighted exposure amounts and expected loss amounts in the case of unfunded credit protection.(2) BIPRU 5.7.21 R (Tranching) applies for the purpose in (1).(3) The provisions in (4) replace those in BIPRU 5.7.22 R to BIPRU 5.7.25 R (Calculating risk weighted exposure amounts under the standardised approach in the case of unfunded credit protection).(4) For the covered portion of the exposure (based on the adjusted value of the credit
In addition to BIPRU 5.8.2 R, where there is a maturity mismatch the credit protection must not be recognised where the exposure is a short term exposure specified in the firm'sIRB permission as being subject to a one-day floor rather than a one-year floor in respect of the maturity value (M) under BIPRU 4.4.68 R.[Note: BCD Annex VIII Part 4 point 2(b)]
If a firm derives long run average estimates of PDs and LGDs for corporate exposure purchased receivables from an estimate of EL, and an appropriate estimate of PD or LGD, the process for estimating total losses must meet the overall standards for estimation of PD and LGD set out in the minimum IRB standards,2 and the outcome must be consistent with the concept of LGD as set out in BIPRU 4.3.99 R.[Note: BCD Annex VII Part 4 point 61]
The structure of the facility must ensure that under all foreseeable circumstances a firm has effective ownership and control of all cash remittances from the receivables. When the obligor makes payments directly to a seller or servicer a firm must verify regularly that payments are forwarded completely and within the contractually agreed terms. Servicer means an entity that manages a pool of purchased receivables or the underlying credit exposures on a day-to-day basis. A firm
For its corporate exposure purchased receivables a firm must comply with the minimum requirements set out in BIPRU 4.8.11 R - BIPRU 4.8.15 R. For corporate exposure purchased receivables that comply in addition with the conditions set out in BIPRU 4.8.18 R, and where it would be unduly burdensome for a firm to use the risk quantification standards for corporate exposures as set out in the minimum IRB standards for these receivables, the risk quantification standards for retail
For corporate exposure purchased receivables, refundable purchase discounts, collateral or partial guarantees that provide first-loss protection for defaultlosses, dilution losses, or both, may be treated as first-loss positions under the provisions in BIPRU 9 (Securitisation) about the IRB approach.[Note: BCD Annex VII Part 1 point 8]
To be eligible for the retail exposure treatment purchased receivables must comply with the minimum requirements set out in BIPRU 4.8.11 R - BIPRU 4.8.15 R and the following conditions:(1) the firm has purchased the receivables from unrelated, third party sellers, and its exposure to the obligor of the receivable does not include any exposures that are directly or indirectly originated by the firm itself;(2) the purchased receivables must be generated on an arm's-length basis
With respect to retail exposures, for purchased receivables, refundable purchase discounts, collateral or partial guarantees that provide first-loss protection for defaultlosses, dilution losses, or both, may be treated as first-loss positions under the provisions in BIPRU 9 (Securitisation) about the IRB approach.[Note: BCD Annex VII Part 1 point 15]
For hybrid pools of purchased retail exposure receivables where the purchasing firm cannot separate exposures secured by real estate collateral and qualifying revolving retail exposures from other retail exposures, the retail risk weight2 function producing the highest capital requirements for those exposures must apply.[Note: BCD Annex VII Part 1 point 16]
The risk weights for dilution risk for purchased receivables (both corporate exposures and retail exposures) must be calculated according to this rule. The risk weights must be calculated according to the formula in BIPRU 4.4.58 R. However, for the purposes of that formula, the total annual sales referred to in BIPRU 4.4.59 R are the weighted average by individual exposures of the pool. The input parameters PD and LGD and the exposure value must be determined under the applicable
For purchased corporate exposure receivables in respect of which a firm cannot demonstrate that its PD estimates meet the minimum IRB standards, the PDs for these exposures must be determined according to the following methods:(1) for senior claims on purchased corporate exposure receivables PD must be the firm's estimate of EL divided by LGD for these receivables;(2) for subordinated claims on purchased corporate exposure receivables PD must be the firm's estimate of EL; and1(3)
In the case of corporate exposures, for dilution risk of purchased receivables PD must be set equal to EL estimate for dilution risk. If a firm is under its IRB permission using the advanced IRB approach for LGD estimates for corporate exposures and it can decompose its EL estimates for dilution risk of purchased corporate exposure receivables into PDs and LGDs in a reliable manner, the PD estimate may be used. A firm may recognise unfunded credit protection in the PD in accordance
In the case of retail exposures, for dilution risk of purchased receivables PD must be set equal to EL estimates for dilution risk. If a firm can decompose its EL estimates for dilution risk of purchased receivables into PDs and LGDs in a reliable manner, the PD estimate may be used.[Note: BCD Annex VII Part 2 point 19]
The following LGD values apply for purchased corporate exposure receivables:(1) for senior purchased corporate exposure receivables exposures where a firm cannot demonstrate that its PD estimates meet the minimum IRB standards, the value is 45%;(2) for subordinated purchased corporate exposure receivables exposures where a firm cannot demonstrate that its PD estimates meet the minimum IRB standards, the value is 100%; and(3) for dilution risk of purchased corporate exposure receivables,
Notwithstanding BIPRU 4.4.34 R and BIPRU 4.8.25 R, for dilution risk and default risk if a firm is under its IRB permission using the advanced IRB approach for LGD estimates for corporate exposures and it can decompose its EL estimates for purchased corporate exposure receivables into PDs and LGDs in a reliable manner, the LGD estimate for purchased corporate exposure receivables may be used.[Note: BCD Annex VII Part 2 point 9]
(1) The exposure value for the items in (2) must be calculated as the committed but undrawn amount multiplied by a conversion factor.(2) For undrawn purchase commitments for revolving purchased receivables that are unconditionally cancellable or that effectively provide for automatic cancellation at any time by the firm without prior notice, a conversion factor of 0% applies. To apply a conversion factor of 0%, a firm must actively monitor the financial condition of the obligor,
Notwithstanding BIPRU 4.3.5 R (Relevant parameters), the calculation of risk weighted exposure amounts for credit risk for all exposures belonging to the equity exposureIRB exposure class must be calculated in accordance with one of the following ways:(1) the simple risk weight approach (see BIPRU 4.7.8 R;(2) the PD/LGD approach (see BIPRU 4.7.13 R); and(3) the internal models approach (see BIPRU 4.7.23 R);in accordance with BIPRU 4.7 and subject to the firm'sIRB permission.[Note:BCD
The exposure value must be the value presented in the financial statements. Admissible equity exposure measures are the following:(1) for investments held at fair value with changes in value flowing directly through income and into capital resources, the exposure value is the fair value presented in the balance sheet;(2) for investments held at fair value with changes in value not flowing through income but into a tax-adjusted separate component of equity, the exposure value is
The risk weighted exposure amounts must be calculated according to the following formula:risk-weighted exposure amounts = RW * exposure value;where:(1) risk weight (RW) = 190% for private equity exposures in sufficiently diversified portfolios;(2) risk weight (RW) = 290% for exchange traded equity exposures; and(3) risk weight (RW) = 370% for all other equity exposures.[Note:BCD Annex VII Part 1 point 19]
Short cash positions and derivative instruments held in the non-trading book are permitted to offset long positions in the same individual stocks provided that these instruments have been explicitly designated as hedges of specific equity exposures and that they provide a hedge for at least another year. Other short positions must be treated as if they are long positions with the relevant risk weight assigned to the absolute value of each position. In the context of maturity mismatched
The expected loss amounts1 for equity exposures must be calculated according to the following formula:(1) expected loss amount = EL × exposure value; and(2) the EL values must be the following:(a) expected loss (EL) = 0.8% for private equity exposures in sufficiently diversified portfolios;(b) expected loss (EL) = 0.8% for exchange traded equity exposures; and(c) expected loss (EL) = 2.4% for all other equity exposures.[Note:BCD Annex VII Part 1 point 32]
The risk weighted exposure amounts must be calculated according to the formulas in BIPRU 4.4.58 R (Risk weighted exposure amounts for sovereigns, institutions and corporates). If a firm does not have sufficient information to use the definition of default a scaling factor of 1.5 must be assigned to the risk weights.[Note:BCD Annex VII Part 1 point 22]
A firm may recognise unfunded credit protection obtained on an equity exposure in accordance with the methods set out in BIPRU 5 (Credit risk mitigation) as modified by BIPRU 4.10. This must be subject to an LGD of 90% on the exposure to the provider of the hedge. For private equity exposures in sufficiently diversified portfolios an LGD of 65% may be used.[Note:BCD Annex VII Part 1 point 24]
PDs must be determined according to the methods for corporate exposures. The following minimum PDs must be applied:(1) 0.09% for exchange traded equity exposures where the investment is part of a long-term customer relationship;(2) 0.09% for non-exchange traded equity exposures where the returns on the investment are based on regular and periodic cash flows not derived from capital gains;(3) 0.40% for exchange traded equity exposures including other short positions as set out
The risk weighted exposure amount is the potential loss on the firm'sequity exposures as derived using internal value-at-risk models subject to the 99th percentile, one-tailed confidence interval of the difference between quarterly returns and an appropriate risk-free rate computed over a long-term sample period, multiplied by 12.5. The risk weighted exposure amounts at the individual exposure level must not be less than the sum of minimum risk weighted exposure amounts required
(1) A firm must meet the standards set out in (2) to (9) for the purpose of calculating capital requirements.(2) The estimate of potential loss must be robust to adverse market movements relevant to the long-term risk profile of the firm's specific holdings. The data used to represent return distributions must reflect the longest sample period for which data is available and be meaningful in representing the risk profile of the firm's specific equity exposures. The data used must
(1) With regard to the development and use of internal models for capital requirement purposes, a firm must establish policies, procedures, and controls to ensure the integrity of the model and modelling process. These policies, procedures, and controls must include the ones set out in the rest of this paragraph.(2) There must be full integration of the internal model into the overall management information systems of the firm and in the management of the non-trading bookequity
A firm must regularly compare actual equity exposure returns (computed using realised and unrealised gains and losses) with modelled estimates. Such comparisons must make use of historical data that cover as long a period as possible. A firm must document the methods and data used in such comparisons. This analysis and documentation must be updated at least annually.[Note:BCD Annex VII Part 4 point 120]
A firm must have sound internal standards for situations where comparison of actual equity exposure returns with the models' estimates calls the validity of the estimates or of the models as such into question. These standards must take account of business cycles and similar systematic variability in equity exposure returns. All adjustments made to internal models in response to model reviews must be documented and consistent with the firm's model review standards.[Note:BCD Annex
To be eligible to be treated as a retail exposure, exposures must meet the following criteria:(1) they must be either to an individual person or persons, or to a small or medium sized entity, provided in the latter case that the total amount owed to the firm and parent undertaking and its subsidiary undertakings, including any past due exposure, by the obligor client or group of connected clients, but excluding claims or contingent claims secured on residential real estate collateral,
(1) This paragraph sets out guidance on BIPRU 4.6.2 R so far as it relates to the boundary between retail exposures and corporate exposures.(2) In deciding what steps are reasonable for the purposes of BIPRU 4.6.2 R (1), a firm may take into account complexity and cost, as well as the materiality of the impact upon its capital calculation. A firm should be able to demonstrate to the FSA that it has complied with the obligation to take reasonable steps under BIPRU 4.6.2 R (1) in
The level of risk differentiation must ensure that the number of exposures in a given grade or pool is sufficient to allow for meaningful quantification and validation of the loss characteristics at the grade or pool level. The distribution of exposures and obligors across grades or pools must be such as to avoid excessive concentrations.[Note:BCD Annex VII Part 4 point 14]
(1) This paragraph contains guidance on the level of differentiation referred to in BIPRU 4.6.7 R.(2) It is important that a firm achieves adequate segmentation to deliver robust estimates of LGD and conversion factors, as well as PD. Whether the focus should be more on exposure size or collateral type is a question of fact for the particular circumstances in which the assignment of exposures to grades or pools occurs. Typically the FSA would expect both to be important.(3) A
A firm must be able to demonstrate to the FSA that the process of assigning exposures to grades or pools provides for a meaningful differentiation of risk, provides for a grouping of sufficiently homogenous exposures, and allows for accurate and consistent estimation of loss characteristics at grade or pool level.[Note:BCD Annex VII Part 4 point 15 (part)]
(1) A firm must consider the following risk drivers when assigning exposures to grades or pools:(a) obligor risk characteristics;(b) transaction risk characteristics, including product or collateral types or both; and(c) delinquency.(2) In the case of (1)(b) a firm must explicitly address cases where several exposures benefit from the same collateral.(3) However:(a) a firm need not consider delinquency if this is compatible with its IRB permission; and(b) (in the case of a firm
A firm must at least annually update obligor and facility assignments or review the loss characteristics and delinquency status of each identified risk pool whichever is applicable. A firm must also at least annually review in a representative sample the status of individual exposures within each pool as a means of ensuring that exposures continue to be assigned to the correct pool.[Note:BCD Annex VII Part 4 point 29]
In addition to complying with BIPRU 4.3.54 R (Data maintenance) a firm must collect and store:(1) data used in the process of allocating exposures to grades or pools;(2) data on the estimated PDs, LGDs and conversion factors associated with grades or pools of exposures;(3) the identity of obligors and exposures that defaulted;(4) for defaultedexposures, data on the grades or pools to which the exposure was assigned over the year prior to default and the realised outcomes on LGD
(1) This rule, in accordance with BIPRU 4.3.57 R (4) (Definition of default), sets the exact number of days past due that a firm must abide by in the case of retail exposures.(2) For retail exposures to counterparts situated within the United Kingdom the number of days past due is 180 days with the exception of retail SME exposures. For these exposures the number is 90 days.(3) For retail exposures to counterparts situated in another EEA State the number of days past due is the
A firm must regard internal data for assigning exposures to grades or pools as the primary source of information for estimating loss characteristics. A firm may use external data (including pooled data) or statistical models for quantification provided a strong link can be demonstrated between:(1) the firm's process of assigning exposures to grades or pools and the process used by the external data source; and(2) the firm's internal risk profile and the composition of the external
If a firm derives long run average estimates of PD and LGD for retail exposures from an estimate of total losses, and an appropriate estimate of PD or LGD, the process for estimating total losses must meet the minimum IRB standards1 for estimation of PD and LGD, and the outcome must be consistent with the concept of LGD as set out in BIPRU 4.3.99 R (Default weighted average).[Note:BCD Annex VII Part 4 point 70]
Table: Risk weighted exposure amounts for retail exposures
This table belongs to BIPRU 4.6.41 R
Correlation (R) |
0.03 × (1 - EXP(-35*PD))/(1-EXP(-35)) + 0.16* |
[1-(1-EXP(-35*PD))/(1-EXP(-35))] |
|
Risk weight (RW) |
(LGD*N[(1-R)-0.5*G(PD)+(R/(1-R))0.5 *G(0.999)]-PD*LGD)* 12.5*1.06 |
N(x) |
denotes the cumulative distribution function for a standard normal random variable (i.e. the probability that a normal random variable with mean zero and variance of one is less than or equal to x). |
G(z) |
denotes the inverse cumulative distribution function for a standard normal random variable (i.e. the value x such that N(x) = z). |
PD = 1 |
For PD = 1 (defaultedexposure), RW must be: Max {0, 12.5 *(LGD- ELBE)} where ELBEmust be the firm's best estimate of expected loss for the defaultedexposure according to BIPRU 4.3.122 R. |
equals RW*exposure value |
[Note:BCD Annex VII Part 1 point 10 (part)]
(1) For qualifying revolving retail exposures a correlation (R) of 0.04 must replace the correlation formula in the table in BIPRU 4.6.42 R.(2) Retail exposures qualify as qualifying revolving retail exposures if they meet the following conditions:(a) the IRB permission of the firm in question does not disapply this paragraph;(b) the exposures are to individuals;(c) the exposures are revolving, unsecured, and, to the extent they are not drawn, immediately and unconditionally cancellable
A firm should be able to demonstrate the low volatility of loss rates mentioned in BIPRU 4.6.44 R (2)(e) at the time of the initial application for an IRB permission and thereafter at any time on request. The benchmark level should be the volatility of loss rates for the qualifying revolving retail exposure portfolio relative to the volatilities of loss rates of other relevant types of retail exposures. A firm should demonstrate low volatility by reference to data on the mean
In the FSA's view a sub-portfolio consisting of credit card or overdraft obligations will usually meet the condition in BIPRU 4.6.44 R (2)(f). In the FSA's view it is unlikely that any other type of retail exposure will do so. If a firm wishes to apply the treatment in BIPRU 4.6.44 R (1) to product types other than credit card or overdraft obligations it should first discuss this with the FSA.
Table: Formulae for the calculation of expected loss amounts
This table belongs to BIPRU 4.6.47 R
Expected loss amount |
|
For defaultedexposures (PD = 1) where a firm uses its own estimates of LGDs, EL must be ELBE, the firm's best estimate of expected loss for the defaultedexposure according to BIPRU 4.3.122 R. For exposures subject to the treatment set out in BIPRU 4.4.79 R (Double default) EL must be 0. |
|
[Note:BCD Annex VII Part 1 point 30 (part)]
Unfunded credit protection may be recognised as eligible by adjusting PD or LGD estimates subject to the minimum IRB standards as specified in BIPRU 4.10.43 R - BIPRU 4.10.48 R and in accordance with the IRB permission either in support of an individual exposure or a pool of exposures. A firm must not assign guaranteed exposures an adjusted PD or LGD such that the adjusted risk weight would be lower than that of a comparable, direct exposure to the guarantor.[Note:BCD Annex VII
Notwithstanding BIPRU 4.6.54 R for the purposes of BIPRU 4.4.80 R the LGD of a comparable direct exposure to the protection provider must either be the LGD associated with an unhedged facility to the guarantor or the unhedged facility of the obligor, depending upon whether in the event both the guarantor and obligor default during the life of the hedged transaction available evidence and the structure of the guarantee indicate that the amount recovered would depend on the financial
(1) Where the credit risk mitigation used relies on the right of a firm to liquidate or retain assets, eligibility depends upon whether risk weighted exposure amounts, and, as relevant, expected loss amounts, are calculated under the standardised approach or the IRB approach.(2) Eligibility further depends upon whether the financial collateral simple method is used or the financial collateral comprehensive method.(3) In relation to repurchase transactions and securities or commodities
The following financial items may be recognised as eligible collateral under all approaches and methods:(1) cash on deposit with, or cash assimilated instruments held by, the lending firm;(2) debt securities issued by central governments or central banks which securities have a credit assessment by an eligible ECAI or export credit agency recognised as eligible for the purposes of the standardised approach, which is associated with credit quality step 4 or above under the rules
For the purposes of BIPRU 5.4.2 R (2), ‘debt securities issued by central governments or central banks' include –(1) debt securities issued by regional governments or local authorities exposures to which are treated as exposures to the central government in whose jurisdiction they are established under the standardised approach;(2) debt securities issued by public sector entities which are treated as exposures to central governments in accordance with BIPRU 3.4.24 R;(3) debt securities
For the purposes of BIPRU 5.4.2 R (3), ‘debt securities issued by institutions’ include:(1) debt securities issued by regional governments or local authorities other than those exposures to which are treated as exposures to the central government in whose jurisdiction they are established under the standardised approach;(2) debt securities issued by public sector entities, exposures to which are treated as exposures to a credit institution under the standardised approach;(3) debt
Debt securities issued by institutions which securities do not have a credit assessment by an eligible ECAI may be recognised as eligible collateral if they fulfil the following criteria:(1) they are listed on a recognised investment exchange or a designated investment exchange;(2) they qualify as senior debt;(3) all other rated issues by the issuing institution of the same seniority have a credit assessment by an eligible ECAI associated with credit quality step 3 or above under
The risk weight that would be assigned under the standardised approach to credit risk if the lending firm had a direct exposure to the collateral instrument must be assigned to those portions of claims collateralised by the market value of recognised collateral. The risk weight of the collateralised portion must be a minimum of 20% except as specified in BIPRU 5.4.19 R to BIPRU 5.4.21 R. The remainder of the exposure receives the risk weight that would be applied to an unsecured
A risk weight of 0% must be assigned to the collateralised portion of the exposure arising from transactions which fulfil the criteria enumerated in BIPRU 5.4.62 R or BIPRU 5.4.65 R. If the counterparty to the transaction is not a core market participant a risk weight of 10% must be assigned.[Note:BCD Annex VIII Part 3 point 27]
A risk weight of 0% must, to the extent of the collateralisation, be assigned to the exposure values determined under BIPRU 13 for financial derivative instruments and subject to daily marking-to-market, collateralised by cash or cash assimilated instruments where there is no currency mismatch. A risk weight of 10% must be assigned to the extent of the collateralisation to the exposure values of such transactions collateralised by debt securities issued by central governments
A 0% risk weight may be assigned where the exposure and the collateral are denominated in the same currency, and either:(1) the collateral is cash on deposit or a cash assimilated instrument; or(2) the collateral is in the form of debt securities issued by central governments or central banks eligible for a 0% risk weight under the standardised approach, and its market value has been discounted by 20%.[Note:BCD Annex VIII Part 3 point 29]
For the purposes of BIPRU 5.4.20 R and BIPRU 5.4.21 R ‘debt securities issued by central governments or central banks' must include:(1) debt securities issued by regional governments or local authorities exposures to which are treated as exposures to the central government in whose jurisdiction they are established under the standardised approach;(2) debt securities issued by multilateral development banks to which a 0% risk weight is assigned under or by virtue of the standardised
Subject to the treatment for currency mismatches in the case of financial derivative instrument set out in BIPRU 5.4.26 R, where collateral is denominated in a currency that differs from that in which the underlying exposure is denominated, an adjustment reflecting currency volatility must be added to the volatility adjustment appropriate to the collateral as set out in BIPRU 5.4.30 R to BIPRU 5.4.65 R.[Note:BCD Annex VIII Part 3 point 31]
In the case of a firm using the financial collateral comprehensive method, where an exposure takes the form of securities or commodities sold, posted or lent under a repurchase transaction or under a securities or commodities lending or borrowing transaction, and margin lending transactions the exposure value must be increased by the volatility adjustment appropriate to such securities or commodities as prescribed in BIPRU 5.4.30 R to BIPRU 5.4.65 R.[Note: BCD Article 78(1), third
(1) The volatility-adjusted value of the collateral to be taken into account is calculated as follows in the case of all transactions except those transactions subject to recognised master netting agreements to which the provisions set out in BIPRU 5.6.5 R to BIPRU 5.6.29 R are to be applied:CVA = C x (1-HC-HFX)(2) The volatility-adjusted value of the exposure to be taken into account is calculated as follows:EVA = E x (1+HE), and in the case of financial derivative instruments
A firm may choose to use the supervisory volatility adjustments approach or the own estimates of volatility adjustments approach independently of the choice it has made between the standardised approach and the IRB approach for the calculation of risk weighted exposure amounts. However, if a firm seeks to use the own estimates of volatility adjustments approach, it must do so for the full range of instrument types, excluding immaterial portfolios where it may use the supervisory
This table belongs to BIPRU 5.4.34 R.
Other collateral or exposure types |
|||
20 day liquidation period (%) |
10 day liquidation period (%) |
5 day liquidation period (%) |
|
Main index equities, main index convertible bonds |
21.213 |
15 |
10.607 |
Other equities or convertible bonds listed on a recognised investment exchange or designated investment exchange |
35.355 |
25 |
17.678 |
Cash |
0 |
0 |
0 |
Gold |
21.213 |
15 |
10.607 |
(1) For secured lending transactions the liquidation period is 20 business days.(2) For repurchase transactions (except insofar as such transactions involve the transfer of commodities or guaranteed rights relating to title to commodities) and securities lending or borrowing transactions the liquidation period is 5 business days.(3) For other capital market-driven transactions1, the liquidation period is 10 business days.[Note:BCD Annex VIII Part 3 point 37]
In relation to repurchase transaction and securities lending or borrowing transactions, where a firm uses the supervisory volatility adjustments approach or the own estimates of volatility adjustments approach and where the conditions set out in (1) – (8) are satisfied, a firm may, instead of applying the volatility adjustments calculated under BIPRU 5.4.30 R to BIPRU 5.4.61 R, apply a 0% volatility adjustment:(1) both the exposure and the collateral are cash or debt securities
Core market participant means the following entities:(1) the entities mentioned in BIPRU 5.4.2 R (2)exposures to which are assigned a 0% risk weight under the standardised approach to credit risk;(2) institutions;(3) other financial companies (including insurance companies) exposures which are assigned a 20% risk weight under the standardised approach;(4) regulated CIUs that are subject to capital or leverage requirements;(5) regulated pension funds; and(6) a recognised clearing
Under the standardised approachE* as calculated under BIPRU 5.4.28 R must be taken as the exposure value for the purposes of BIPRU 3.2.20 R to BIPRU 3.2.26 R. In the case of off-balance sheet items listed in BIPRU 3.7, E* must be taken as the value to which the percentages indicated in BIPRU 3.2.1 R and BIPRU 3.7.2 R must be applied to arrive at the exposure value.[Note:BCD Annex VIII Part 3 point 60]
A firm must hold capital calculated in accordance with BIPRU 14.2.13 Ragainst the CCR arising from exposures arising in the trading book due to the following:(1) free deliveries (where BIPRU 14.4 requires it to be treated as an exposure);(2) financial derivative instruments and credit derivatives;(3) repurchase agreements, reverse repurchase agreements, securities or commodities lending or borrowing transaction based on securities or commodities included in the trading book;(4)
For the purposes of the calculation of the counterparty risk capital component, a financial derivative instrument means:(1) an item falling within BIPRU 13.3.3 R other than an item to which an exposure value of zero is attributed under BIPRU 13.3.13 R or BIPRU 13.8.8 R (Exposure to a central counterparty); and(2) a credit derivative.[Note: CAD Article 3(1)(h) and Annex II point 7 first sentence]
In the case of total return swap credit derivatives and credit default swap credit derivatives, a firm must obtain a figure for potential future credit exposure by multiplying the nominal amount of the instrument by the following percentages:(1) 5% where the reference obligation is one that if it gave rise to a direct exposure of the firm would be a qualifying debt security for the purposes of BIPRU 7.2;(2) 10 % where the reference obligation is one that if it gave rise to a direct
In the case of a credit default swap, a firm the exposure of which arising from the swap represents a long position in the underlying may use a figure of 0% for potential future credit exposure, unless the credit default swap is subject to closeout upon the insolvency of the entity the exposure of which arising from the swap represents a short position in the underlying, even though the underlying has not defaulted.
The operation of BIPRU 14.2.8 R can be illustrated by an example as follows: where the credit derivative is a first to default transaction, the appropriate percentage for the potential future credit exposure will be determined by the lowest credit quality of the underlying obligations in the basket. If there are non-qualifying items in the basket, the percentage applicable to the non-qualifying reference obligation should be used. For second and subsequent to default transactions,
Subject to BIPRU 14.2.3 R to BIPRU 14.2.5 R and BIPRU 14.2.14 R to BIPRU 14.2.17 R, a firm must calculate exposure values and risk weighted exposure amounts for the exposures falling under BIPRU 14.2.2 R (1) to BIPRU 14.2.2R (5) in accordance with:(1) the standardised approach to credit risk; or(2) if the firm has an IRB permission, the IRB approach in accordance with the terms of the firm'sIRB permission.[Note: CAD Annex II point 6]
For the purposes of BIPRU 14.2.11 R:(1) in the case of repurchase transactions and securities or commodities lending or borrowing transactions booked in the trading book, all CRD financial instruments and commodities that are eligible to be included in the trading book may be recognised as eligible collateral;(2) for exposures due to financial derivative instruments and long settlement transactions booked in the trading book, commodities that are eligible to be included in the
Where a firm calculates risk weighted exposure amounts for the purposes of BIPRU 14 in accordance with the IRB approach, then for the purposes of the calculation provided for in BIPRU 4.4.79 R (Double default), the following apply:(1) value adjustments made to take account of the credit quality of the counterparty may be included in the sum of value adjustments and provisions made for the exposures indicated in BIPRU 14; and(2) unless the firm'sIRB permission does not permit it,
For the purposes of the calculation of the counterparty risk capital component, without prejudice to BIPRU 13.3.13 R and BIPRU 13.8.8 R (Exposure to a central counterparty) exposures to recognised third-country investment firms and exposures incurred to recognised clearing houses and designated investment exchanges must be treated as exposures to institutions.[Note: CAD Article 40]
Where a firm carries out netting under BIPRU 14.2.21 R, it must allocate the net exposure to:(1) the trading book for the purposes of the calculation under BIPRU 14.2.11 R, if the gross trading bookexposures exceed gross non-trading bookexposures; and(2) the non-trading book for the purposes of BIPRU 13, if the gross non-trading bookexposures exceed gross trading bookexposures.
Subject to BIPRU 13:(1) the exposure value of an asset item must be its balance-sheet value, subject to any value adjustments required by GENPRU 1.3; and(2) the exposure value of an off-balance sheet item listed in the table in BIPRU 3.7.2 R must be the percentage of its value set out in that table.[Note: BCD Article 78(1) part]
BIPRU 13 sets out the method for determination of the exposure value of a financial derivative instrument, with the effects of contracts of novation and other netting agreements taken into account for the purposes of that method in accordance with BIPRU 13.7.[Note: reference to BCD Article 78(2) first sentence. Implementation in BIPRU 13]
A firm must assign each exposure to one of the following exposure classes:(1) claims or contingent claims on central governments or central banks;(2) claims or contingent claims on regional governments or local authorities;(3) claims or contingent claims on administrative bodies and non-commercial undertakings;(4) claims or contingent claims on multilateral development banks;(5) claims or contingent claims on international organisation;(6) claims or contingent claims on institutions;(7)
To be eligible for the retail exposure class, an exposure must meet the following conditions:(1) the exposure must be either to an individual person or persons, or to a small or medium sized entity;(2) the exposure must be one of a significant number of exposures with similar characteristics such that the risks associated with such lending are substantially reduced; and(3) the total amount owed to the firm, its parent undertakings and its subsidiary undertakings, including any
(1) To calculate risk weighted exposure amounts, risk weights must be applied to all exposures, unless deducted from capital resources, in accordance with the provisions of BIPRU 3.4.(2) The application of risk weights must be based on the standardised credit risk exposure class to which the exposure is assigned and, to the extent specified in BIPRU 3.4, its credit quality.(3) Credit quality may be determined by reference to:(a) the credit assessments of eligible ECAIs in accordance
(1) Subject to BIPRU 3.2.35 R, and with the exception of exposures giving rise to liabilities in the form of the items referred to in BIPRU 3.2.26 R, a firm is not required to comply with BIPRU 3.2.20 R (Calculation of risk weighted exposures amounts under the standardised approach) in the case of the exposures of the firm to a counterparty which is its parent undertaking, its subsidiary undertaking or a subsidiary undertaking of its parent undertaking or to which the firm is
A firm must not apply the treatment in BIPRU 3.2.25 R to exposures giving rise to liabilities in the form of any of the following items:(1) in the case of a BIPRU firm, any tier one capital or tier two capital; and(2) in the case of any other undertaking, any item that would be tier one capital or tier two capital if the undertaking were a BIPRU firm.[Note: BCD Article 80(7), part]
(1) A firm may not apply BIPRU 3.2.25 R unless it has given one month's prior notice to the FSA that it intends do so.(2) A firm need only give the FSA the notice required in (1) once rather than with respect to each exposure.(3) A firm may stop applying BIPRU 3.2.25 R or may stop applying it to some exposures.(4) If a firm stops applying BIPRU 3.2.25 R it may start to apply it again if it notifies the FSA under (1) that it intends do so.(5) A firm must notify the FSA if it becomes
For the purposes of the standardised approach (including as it applies for the purposes of BIPRU 14) and without prejudice to BIPRU 13.3.13 R and BIPRU 13.8.8 R (Exposure to a central counterparty), exposures to recognised third country investment firms and exposures to recognised clearing houses, designated clearing houses, recognised investment exchanges and designated investment exchanges must be treated as exposures to institutions.[Note: CAD Article 40]
A firm's systems for the management and rating of credit risk exposures must be sound and implemented with integrity and, in particular, they must meet the following standards in accordance with the minimum IRB standards:(1) the firm'srating systems provide for a meaningful assessment of obligor and transaction characteristics, a meaningful differentiation of risk and accurate and consistent quantitative estimates of risk;(2) internal ratings and default and loss estimates used
(1) This paragraph provides guidance on BIPRU 4.2.2 R and in particular BIPRU 4.2.2 R (1).(2) The information that a firm produces or uses for the purpose of the IRB approach should be reliable and take proper account of the different users of the information produced (customers, shareholders, regulators and other market participants).(3) A firm should establish quantified and documented targets and standards, against which it should test the accuracy of data used in its rating
A firm must be able to demonstrate that it has been using for the IRB exposure classes in question rating systems that were broadly in line with the minimum IRB standards for internal risk measurement and management purposes for at least three years prior to the date of its IRB permission.[Note:BCD Article 84(3)]
To the extent that a firm'sIRB permission permits this, implementation may be carried out sequentially across the different IRB exposure classes within the same business unit, across different business units in the same group or for the use of own estimates of LGDs or conversion factors for the calculation of risk weights for the sovereign, institution and corporate IRB exposure class.3[Note:BCD Article 85(1) (part)]
(1) Implementation of the IRB approach as referred to in BIPRU 4.2.18 R must be carried out within a reasonable period of time as set out in the IRB permission.(2) The implementation must be carried out subject to strict conditions determined by the FSA and set out in the IRB permission.(3) A firm must not use the flexibility under BIPRU 4.2.18 R selectively with the purpose of achieving reduced minimum capital requirements in respect of those IRB exposure classes or business
(1) A firm should achieve full roll-out of the IRB approach to all its exposures, subject to the exemptions outlined in BIPRU 4.2.26 R, within the period specified in its IRB permission. A firm should not retain a permanent mix of portfolios on the standardised approach and the IRB approach, on the foundation IRB approach and the advanced IRB approach or on a mixture of all approaches with the exception of portfolios covered by those exemptions.(2) This applies to a move:(a) from
Subject to BIPRU 4.2.17 R - BIPRU 4.2.20 R, BIPRU 4.2.22 R and BIPRU 4.2.26 R, a firm that has an IRB permission must not use the standardised approach for the calculation of risk weighted exposure amounts for the exposures to which the IRB approach applies under the IRB permission.[Note:BCD Article 85(4)]1
Subject to BIPRU 4.2.17 R - BIPRU 4.2.22 R and BIPRU 4.2.26 R, a firm whose IRB permission provides for the use of the advanced IRB approach for the calculation of LGDs and conversion factors for the sovereign, institution and corporate IRB exposure class must not use the LGD values and conversion factors applicable to the foundation IRB approach for the exposures to which the advanced IRB approach applies under the IRB permission.[Note:BCD Article 85(5)]
(1) To the extent that its IRB permission permits this, a firm permitted to use the IRB approach in the calculation of risk weighted exposure amounts and expected loss amounts3 for one or more IRB exposure classes may apply the standardised approach in accordance with this rule.3(2) A firm may apply the standardised approach to the IRB exposure class referred to in BIPRU 4.3.2 R (1) (Sovereigns) where the number of material counterparties is limited and it would be unduly burdensome
As part of the application for an IRB permission, a firm should have a well documented policy explaining the basis on which exposures are to be selected for permanent exemption from the IRB approach and for treatment under the standardised approach. The firm's roll out plan should also contain provisions for the continuing application of that policy on a consistent basis over time.
For the purposes of BIPRU 4.2.26 R (4), the equity exposureIRB exposure class of a firm must be considered material if its aggregate value, excluding equity exposures incurred under legislative programmes as referred to in BIPRU 4.2.26 R (8), exceeds, on average over the preceding year, 10% of the firm'scapital resources. If the number of those equity exposures is less than 10 individual holdings, that threshold is 5% of the firm'scapital resources.[Note:BCD Article 89(2)]
(1) This rule sets out what must be treated as being non-significant business or immaterial for the purposes of BIPRU 4.2.26 R (4), for exposures that do not fall within the equity exposureIRB exposure class.(2) A firm may elect permanently to exclude exposures from the IRB approach and apply the standardised approach. However a firm may only make use of this exemption to the extent that:(a) the consolidated credit risk requirement (adjusted under (6)) so far as it is attributable
If a firm applies to use the advanced IRB approach for the sovereign, institution and corporate IRB exposure class, BIPRU 4.2.26 R (4) also applies with respect to exposures in that class. For these purposes, to the extent permitted in the firm'sIRB permission, a firm may:(1) exclude some exposures from the IRB approach and apply the standardised approach to those exposures; and(2) exclude other exposures from the advanced IRB approach and apply the foundation IRB approach to
Where BIPRU 4.2.31 R applies:(1) the 15% limit in BIPRU 4.2.30 R (2) is a combined limit for excluded exposures remaining on the standardised approach and excluded exposures remaining on the foundation IRB approach; and(2) the calculation in BIPRU 4.2.30 R (2)(a) is carried out under whichever method of calculation would be applicable to the exposure in question.
(1) Generally, the FSA will consider excluding, through a firm'sIRB permission, exposures falling into BIPRU 4.2.26 R (6) from the IRB approach. The degree to which this exclusion applies will be set out in the firm'sIRB permission.(2) Exposures excluded under (1) will be eligible for a 0% risk weight under the standardised approach if they satisfy the conditions in BIPRU 3.2.25 R to BIPRU 3.2.27 R (Zero risk weight for certain intra-group exposures).(3) Exposures to or holdings
(1) This guidance deals with some possible effects of acquiring a major new business after the grant of an IRB permission.(2) A firm should if possible ensure that the exposures arising through the acquisition are dealt with in accordance with the firm'sIRB permission.(3) If the acquisition is made during the currency of a roll out plan under BIPRU 4.2.18 R, a firm should ensure that the exposures arising through the acquisition are dealt with in accordance with that plan. For
Where there is a securitisation of revolving exposures subject to an early amortisation provision, the originator must calculate an additional risk weighted exposure amount in accordance with this section in respect of the risk that the levels of credit risk to which it is exposed may increase following the operation of the early amortisation provision. Accordingly this section sets out how an originator must calculate a risk weighted exposure amount when it sells revolving exposures
For the purposes of this section, subject to BIPRU 9.13.6 R:(1) originators interest means the exposure value of that notional part of a pool of drawn amounts sold into a securitisation, the proportion of which in relation to the amount of the total pool sold into the structure determines the proportion of the cash-flows generated by principal and interest collections and other associated amounts which are not available to make payments to those having securitisation positions
Subject to BIPRU 9.13.7 R, the exposure of the originator associated with its rights in respect of the originators interest must not be treated as a securitisation position but as a pro rata exposure to the securitised exposures as if they had not been securitised.[Note:BCD Annex IX Part 4 point 20]
(1) For firms using the IRB approach set out in BIPRU 4, this paragraph applies in place of BIPRU 9.13.4 R.(2) For the purposes of this section, originators interest means the sum of:(a) the exposure value of that notional part of a pool of drawn amounts sold into a securitisation, the proportion of which in relation to the amount of the total pool sold into the structure determines the proportion of the cash-flows generated by principal and interest collections and other associated
For firms using the IRB approach set out in BIPRU 4, this paragraph applies in place of BIPRU 9.13.5 R. The exposure of the originator associated with its rights in respect of that part of the originators interest described in BIPRU 9.13.6 R (2)(a) must not be treated as a securitisation position but as a pro rata exposure to the securitised drawn amounts as if they had not been securitised in an amount equal to that described in BIPRU 9.13.6 R (2)(a). The originator must also
Originators of the following types of securitisation are exempt from the capital requirement in BIPRU 9.13.1 R:(1) securitisations of revolving exposures whereby investors remain fully exposed to all future draws by borrowers so that the risk on the underlying facilities does not return to the originator even after an early amortisation event has occurred; and(2) securitisations where any early amortisation provision is solely triggered by events not related to the performance
For an originator subject to the capital requirement in BIPRU 9.13.1 R the total of the risk weighted exposure amounts in respect of its positions in the investors interest (as defined in BIPRU 9.13.4 R or BIPRU 9.13.6 R) and the risk weighted exposure amounts calculated under BIPRU 9.13.1 R must be no greater than the greater of:(1) the risk weighted exposure amounts calculated in respect of its positions in the investors interest (as so defined); and(2) the risk weighted exposure
The risk weighted exposure amount to be calculated in accordance with BIPRU 9.13.1 R must be determined by multiplying the amount of the investors interest (as defined in BIPRU 9.13.4 R or BIPRU 9.13.6 R) by the product of:(1) the appropriate conversion figure as indicated in BIPRU 9.13.16 R, BIPRU 9.13.19 R or BIPRU 9.13.20 R; and(2) the weighted average risk weight that would apply to the securitised exposures if the exposures had not been securitised.[Note:BCD Annex IX Part
In the case of a securitisation meeting the following conditions:(1) it is subject to an early amortisation provision;(2) the securitisation is of retail exposures which are uncommitted and unconditionally cancellable without prior notice; and(3) the early amortisation is triggered by the excess spread level falling to a specified levela firm must, to calculate the appropriate conversion figure referred to in BIPRU 9.13.11 R, compare the three-month average excess spread level
In the case of a securitisation meeting the conditions in this paragraph, a firm may apply to the FSA for a waiver that would allow a treatment which approximates closely to that prescribed in BIPRU 9.13.13 R to BIPRU 9.13.17 R for determining the conversion figure indicated. If a firm wants such a waiver, it should satisfy the FSA that:(1) the securitisation is subject to an early amortisation provision of retail exposures;(2) those retail exposures are uncommitted and unconditionally
Eligible funded protection is limited to that which is eligible for the calculation of risk weighted exposure amounts under the standardised approach as laid down under BIPRU 5 and recognition is subject to compliance with the relevant minimum requirements as laid down under BIPRU 5.[Note:BCD Annex IX Part 4 point 60]
Where risk weighted exposure amounts are calculated using the ratings based method, the exposure value and/or the risk weighted exposure amount for a securitisation position in respect of which credit protection has been obtained may be modified in accordance with the provisions of BIPRU 5 (Credit risk mitigation) as they apply for the calculation of risk weighted exposure amounts under the standardised approach set out in BIPRU 3.[Note:BCD Annex IX Part 4 point 62]
In the case of funded credit protection, the risk weighted exposure amount of the securitisation position must be calculated by multiplying the funded protection-adjusted exposure amount of the position (E*, as calculated under BIPRU 5.4.28 R (3), taking the amount of the securitisation position to be E) by the effective risk weight.[Note:BCD Annex IX Part 4 point 64]
In the case of unfunded credit protection, the risk weighted exposure amount of the securitisation position must be calculated by multiplying GA (the amount of the protection adjusted for any currency mismatch and maturity mismatch in accordance BIPRU 5.7.23 R (2)) by the risk weight of the protection provider; and adding this to the amount arrived at by multiplying the amount of the securitisation position minus GA by the effective risk weight.[Note:BCD Annex IX Part 4 point
In other cases the firm must treat the securitisation position as two or more positions with the uncovered portion being the position with the lower credit quality. For the purposes of calculating the risk weighted exposure amount for this position, the provisions in BIPRU 9.12.22 R to BIPRU 9.12.24 G apply subject to the modifications that T is adjusted to e* in the case of funded credit protection; and to T-g in the case of unfunded credit protection, where e* denotes the ratio
The IRB approach is an alternative to the standardised approach for calculating a firm's credit risk capital requirements. It may be applied to all a firm'sexposures or to some of them, subject to various limitations on partial use as set out in BIPRU 4.2. Under the IRB approach capital requirements are based on a firm's own estimates of certain parameters together with other parameters set out in the Banking Consolidation Directive.
For exposures in the sovereign, institution and corporate IRB exposure class, there is a foundation IRB approach under which a firm provides its own estimates of PD and an advanced IRB approach under which a firm additionally provides its own estimates of LGD and conversion factors. The distinction between the foundation IRB approach and the advanced IRB approach only applies to this IRB exposure class.
For the corporate exposure class there is a separate sub-class of specialised lending exposure. A firm may calculate risk weights for these exposures, where it is able to do so, in the same way as it does for the rest of its corporate exposure class, i.e. using the foundation IRB approach or the advanced IRB approach. Where a firm is not able to use this approach it may calculate risk weights for specialised lending exposures by slotting them into predetermined risk weights.
(1) The FSA will only grant an IRB permission if it is satisfied that the firm's systems for the management and rating of credit risk exposures are sound and implemented with integrity and, in particular, that they meet the standards in BIPRU 4.2.2 R in accordance with the minimum IRB standards.(2) Under BIPRU 4.2.11 R, a firm applying for an IRB permission is required to demonstrate that it has been using for the IRB exposure classes in question rating systems that were broadly
A firm must calculate its credit risk capital component as the sum of:(1) (for exposures to which the standardised approach is applied) the credit risk capital component as calculated under BIPRU 3.1.5 R; and(2) (for exposures to which the IRB approach is applied to which the standardised approach would otherwise apply in accordance with BIPRU 3.1.5 R (Credit risk capital component)), 8% of the total of the firm'srisk weighted exposure amounts calculated in accordance with the
By modifying GENPRU 2.1.51 R to allow the firm to use the IRB approach to calculate all or part of its risk weighted exposure amounts, the FSA is treating it like an application rule. The modification means that the provisions of BIPRU relating to the IRB approach supersede the rules relating to the standardised approach for exposures coming within the scope of the IRB permission.
If a provision of the Handbook relating to the IRB approach says that a firm may do something if its IRB permission allows it, a firm may do that thing unless its IRB permission expressly says that it may not do so except that:(1) BIPRU 4.2.18 R - BIPRU 4.2.19 R (Sequential implementation of IRB approach) and BIPRU 4.2.26 R (1)-BIPRU 4.2.26R (5) (Combined use of standardised approach with IRB approach) only apply if expressly permitted by a firm'sIRB permission;(2) a firm may
The following parties may be recognised as eligible providers of unfunded credit protection:(1) central governments and central banks;(2) regional governments or local authorities;(3) multilateral development banks;(4) international organisationsexposures which are assigned a 0% risk weight under the standardised approach;(5) public sector entities, claims on which are treated as claims on institutions or central governments under the standardised approach;(6) institutions;(7)
When a firm conducts an internal hedge using a credit derivative – i.e. hedges the credit risk of an exposure in the non-trading book with a credit derivative booked in the trading book – in order for the protection to be recognised as eligible for the purposes of BIPRU 4.10 or BIPRU 5 the credit risk transferred to the trading book must be transferred out to a third party or parties. In such circumstances, subject to the compliance of such transfer with the requirements for the
Subject to BIPRU 5.7.9 R, for the credit protection deriving from a guarantee or credit derivative to be recognised the following conditions must be met:(1) the credit protection must be direct;(2) the extent of the credit protection must be clearly defined and incontrovertible;(3) the credit protection contract must not contain any clause, the fulfilment of which is outside the direct control of the lender, that:(a) would allow the protection provider unilaterally to cancel the
Where an exposure is protected by a guarantee which is counter-guaranteed by a central government or central bank, a regional government or local authority or a public sector entity claims on which are treated as claims on the central government in whose jurisdiction they are established under the standardised approach, a multilateral development bank to which a 0% risk weight is assigned under or by virtue of the standardised approach, or a public sector entity claims on which
The treatment of BIPRU 5.7.9 R applies, also, to an exposure which is not counter-guaranteed by an entity listed in that rule if the exposure's counter-guarantee is in its turn directly guaranteed by one of the listed entities and the conditions listed in BIPRU 5.7.9 R are satisfied.[Note: BCD Annex VIII Part 2 point 17]
(1) The value of unfunded credit protection (G) is the amount that the protection provider has undertaken to pay in the event of the default or non-payment of the borrower or on the occurrence of other specified credit events.(2) In the case of credit derivatives which do not include as a credit event restructuring of the underlying obligation involving forgiveness or postponement of principal, interest or fees that result in a credit loss event (e.g. value adjustment, the making
Where unfunded credit protection is denominated in a currency different from that in which the exposure is denominated (a currency mismatch) the value of the credit protection must be reduced by the application of a volatility adjustment HFX as follows:G* = G x (1-HFX)where:(1) G is the nominal amount of the credit protection;(2) G* is G adjusted for any foreign currency risk; and(3) Hfx is the volatility adjustment for any currency mismatch between the credit protection and the
For the purposes of BIPRU 3.2.20 R to BIPRU 3.2.26 R, g shall be the risk weight to be assigned to an exposure which is fully protected by unfunded credit protection (GA), where:(1) g is the risk weight of exposures to the protection provider as specified under the standardised approach; and(2) GA is the value of G* as calculated under BIPRU 5.7.17 R further adjusted for any maturity mismatch as laid down in BIPRU 5.8.
Where the protected amount is less than the exposure value and the protected and unprotected portions are of equal seniority – ie the firm and the protection provider share losses on a pro-rata basis, proportional regulatory capital relief is afforded. For the purposes of BIPRU 3.2.20 R to BIPRU 3.2.26 Rrisk weighted exposure amounts must be calculated in accordance with the following formula:(E-GA) x r + GA x gwhere:(1) E is the exposure value;(2) GA is the value of G* as calculated
A firm may apply the treatment provided for in BIPRU 3.4.5 R to BIPRU 3.4.7 R to exposures or parts of exposures guaranteed by the central government or central bank, where the guarantee is denominated in the domestic currency of the borrower and the exposure is funded in that currency.[Note: BCD Annex VIII Part 3 point 89]
Where a firm obtains credit protection for a number of exposures under terms that the first default among the exposures will trigger payment and that this credit event will terminate the contract, the firm may modify the calculation of the risk weighted exposure amount and, as relevant, the expected loss amount of the exposure which would in the absence of the credit protection produce the lowest risk weighted exposure amount under the standardised approach or the IRB approach
Where the nth default among the exposures triggers payment under the credit protection provided by a credit derivative, a firm purchasing the protection may only recognise the protection for the calculation of risk weighted exposure amounts and, as relevant, expected loss amounts if protection has also been obtained for defaults 1 to n-1 or when n-1 defaults have already occurred. In such cases the methodology must follow that set out in BIPRU 5.7.27 R for first-to-default derivatives
The following must be calculated in accordance with BIPRU 9 (Securitisation):(1) risk-weighted exposure amounts for securitisedexposures and for exposures belonging to the IRB exposure class referred to in BIPRU 4.3.2 R (6) (securitisation positions); and(2) the expected loss amounts for securitisedexposures.[Note: BCD Article 87(10) and Article 88(3)]
Where a firm provides credit protection for a number of exposures under terms that the nth default among the exposures shall trigger payment and that this credit event shall terminate the contract, if the product has an external credit assessment from an eligible ECAI the risk weights set out in BIPRU 9 must be applied. If the product is not rated by an eligible ECAI, the risk weights of the exposures included in the basket must be aggregated, excluding n-1 exposures where the
The risk weighted exposure amounts must be calculated according to the formula:Risk-weighted exposure amount = 100% * exposure value except for when the exposure is a residual value in which case it should be provisioned for each year and will be calculated as follows:1/t * 100% * exposure value;where t is the number of years of the lease contract term.[Note: BCD Annex VII Part 1 point 27]
Where a firm has full recourse in respect of purchased receivables for default risk and for dilution risk, to the seller of the purchased receivables, BIPRU 4.8.21 R and BIPRU 4.8.30 R need not be applied. The exposure may instead be treated as a collateralised exposure.[Note: BCD Article 87(2) (part)]
(1) Where exposures in the form of a CIU meet the criteria set out in BIPRU 3.4.121 R to BIPRU 3.4.122 R (Conditions for look through treatment under the standardised approach) and the firm is aware of all of the underlying exposures of the CIU, the firm must look through to those underlying exposures in order to calculate risk weighted exposure amounts and expected loss amounts in accordance with the methods set out in BIPRU 4.(2) Where (1) applies but a firm does not meet the
(1) Where exposures in the form of a CIU do not meet the criteria set out in BIPRU 3.4.121 R to BIPRU 3.4.122 R (Conditions for look through treatment under the standardised approach) or the firm is not aware of all of the underlying exposures of the CIU, a firm must look through to the underlying exposures and calculate risk weighted exposure amounts and expected loss amounts in accordance with the approach set out in BIPRU 4.7.9 R - BIPRU 4.7.12 R (Simple risk weights). If,
For the purposes of BIPRU 4.9.12 R (1), in the case of non-equity exposures a firm should look at the risk profile of the underlying exposures and map these to an equivalent equity risk weight. For example, if the underlying exposures are exchange-traded, the risk weight of exchange-traded equity exposures will apply. If the underlying exposures are unknown, the risk weight of the other equity class will apply. Only under exceptional circumstances would supervisors expect to see
The expected loss amounts for exposures referred to in BIPRU 4.9.11 R - BIPRU 4.9.12 R must be calculated in accordance with the methods set out in BIPRU 4.4.61 R (Calculation of expected loss for sovereigns, institutions and corporates), BIPRU 4.5.12 R - BIPRU 4.5.14 R (Calculation of expected loss for specialised lending), BIPRU 4.6.47 R - BIPRU 4.6.48 R (Calculation of expected loss for retail exposures), BIPRU 4.7.12 R, BIPRU 4.7.17 R and BIPRU 4.7.26 R (Calculation of expected
For an originator, a sponsor, or for other firms which can calculate KIRB, the risk weighted exposure amounts calculated in respect of its positions in a securitisation may be limited to that which would produce an amount in respect of its credit risk capital requirement equal to the sum of 8% of the risk weighted exposure amount which would be produced if the securitised assets had not been securitised and were on the balance sheet of the firm plus the expected loss amounts of
Under the ratings based method, the risk weighted exposure amount of aratedsecuritisation position must be calculated by applying to the exposure value the risk weight associated with the credit quality step with which the credit assessment is associated as prescribed in BIPRU 9.12.11 R and BIPRU 9.12.12 R multiplied by 1.06.[Note:BCD Annex IX Part 4 point 46]
Table: Positions other than ones with short-term credit assessments
This table belongs to BIPRU 9.12.10 R
Credit Quality Step (CQS) |
Risk weight |
||
A |
B |
C |
|
CQS 1 |
7% |
12% |
20% |
CQS 2 |
8% |
15% |
25% |
CQS 3 |
10% |
18% |
35% |
CQS 4 |
12% |
20% |
|
CQS 5 |
20% |
35% |
|
CQS 6 |
35% |
50% |
|
CQS 7 |
60% |
75% |
|
CQS 8 |
100% |
||
CQS 9 |
250% |
||
CQS 10 |
425% |
||
CQS 11 |
650% |
||
Below CQS 11 |
1250% |
||
[Note: For mapping of the credit quality step to the credit assessments of eligible ECAIs, referto: www.fsa.gov.uk/pubs/international/ecais_securitisation.pdf ]
The risk weights in column C of each table in BIPRU 9.12.11 R and BIPRU 9.12.12 R must be applied where the position is in a securitisation where the effective number of exposuressecuritised is less than six. In calculating the effective number of exposuressecuritised multiple exposures to one obligor must be treated as one exposure. The effective number of exposures is calculated as:N = (((i)(EADi))2)/((i)(EADi2))where EADi represents the sum of the exposure values of all exposures
(1) If:(a) a firm'sIRB permission allows it to use this treatment; and(b) the conditions in (2)(16) are satisfied,a firm may attribute to an unrated position in an asset backed commercial paper programme a derived rating as laid down in (3).(2) Positions in the commercial paper issued from the programme must be rated positions.(3) Under the ABCP internal assessment approach, the unrated position must be assigned by the firm to one of the rating grades described in (5). The position
(1) Subject to any permission of the type described in BIPRU 9.12.28 G, the risk weight to be applied to the exposure amount must be:12.5 (S[L+T] - S[L]) / T(2) The remaining provisions of this paragraph define the terms used in the formulae in (1) and (3).(3) 2(4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) In these expressions, Beta [x; a, b]refers to the cumulative beta distribution with parameters a and b evaluated at x.(16) T (the thickness of the tranche in which the
(1) Under the supervisory formula method, if the exposure value of the largest securitisedexposure, C1, is no more than 3% of the sum of the exposure values of the securitisedexposures, then for the purposes of the supervisory formula method the firm may set LGD equal 50% and N equal to either:(a) ;or(b) N=1/ C1.(2) Cm is the ratio of the sum of the exposure values of the largest 'm' exposures to the sum of the exposure values of the exposuressecuritised. The level of m may be
Where a securitisation of retail exposures has a sufficiently low value of N for the simplification in BIPRU 9.12.23 R (3) to result in a material change in the capital charge as compared to the position if the approach in BIPRU 9.12.23 R were not taken, a firm should discuss with the FSA the suitability of its use.
(1) When it is not practical for the firm to calculate the risk weighted exposure amounts for the securitised exposures as if they had not been securitised and the position does not qualify for the ABCP internal assessment approach, a firm may apply to the FSA for a variation of its IRB permission under which, on an exceptional basis, it may temporarily apply the method in (2) for the calculation of risk weighted exposure amounts for an unratedsecuritisation position in the form
A firm must calculate the exposure value of a long settlement transaction in accordance with either:(1) BIPRU 13; or(2) the master netting agreement internal models approach, if it has a master netting agreement internal models approachwaiver which permits it to apply that approach.[Note: BCD Article 78(2) second sentence, in respect of long settlement transaction]
A firm may determine exposures arising from long settlement transactions using any of the CCR mark to market method, the CCR standardised method and the CCR internal model method, regardless of the methods chosen for treating financial derivatives instruments and repurchase transactions, securities or commodities lending or borrowing transactions, and margin lending transactions. In calculating capital requirements for long settlement transactions, a firm that uses the IRB approach
A firm is not required to calculate the exposure value of a transaction as a long settlement transaction for the purposes of BIPRU 13 if the transaction is a financial derivative instrument or a securities financing transaction and the firm chooses to calculate the capital requirement for the transaction according to the methods applicable to those exposures.
Under the CCR mark to market method, the CCR standardised method and the CCR internal model method, a firm must determine the exposure value for a given counterparty as equal to the sum of the exposure values calculated for each netting set with that counterparty.[Note: BCD Annex III Part 2 point 5]
Notwithstanding BIPRU 13.3.1 R and BIPRU 13.3.5 R, a firm may determine the exposure value of a credit risk exposure outstanding with a central counterparty in accordance with BIPRU 13.3.13 R, provided that the central counterparty'scounterparty credit riskexposure with all participants in its arrangements are fully collateralised on a daily basis.[Note: BCD Article 78(4) in respect of financial derivatives and long settlement transactions]
A firm may attribute an exposure value of zero for CCR to derivative contracts and long settlement transactions, or to other exposures arising in respect of those contracts or transactions (but excluding an exposure arising from collateral held to mitigate losses in the event of the default of other participants in the central counterparty's arrangements) where they are outstanding with a central counterparty and have not been rejected by the central counterparty.[Note: BCD Annex
When a firm purchases credit derivative protection against a non-trading book ,exposure or against a CCRexposure, it must compute its capital requirement for the hedged asset in accordance with:(1) BIPRU 5.7.16 R to BIPRU 5.7.25 R and BIPRU 4.10.49 R (4) to (6) (Unfunded credit protection: Valuation and calculation of risk-weighted exposure amounts and expected loss amounts);(2) BIPRU 4.4.79 R (Double default); or(3) BIPRU 4.10.40 R to BIPRU 4.10.48 R (Unfunded credit protection:
Subject to BIPRU 9.11.5 R, the risk weighted exposure amount of a ratedsecuritisation position must be calculated by applying to the exposure value the risk weight associated with the credit quality step with which the credit assessment has been determined to be associated, as prescribed in BIPRU 9.11.2 R or BIPRU 9.11.3 R.[Note:BCD Annex IX Part 4 point 6]
For an originator or sponsor, the risk weighted exposure amounts calculated in respect of its positions in a securitisation may be limited to the risk weighted exposure amounts which would be calculated for the securitised exposures had they not been securitised subject to the presumed application of a 150% risk weight to all past due items and items belonging to regulatory high risk categories (see BIPRU 3.4.104 R and BIPRU 3 Annex 3 R) amongst the securitised exposures.[Note:BCD
(1) A firm having an unratedsecuritisation position may apply the treatment set out in this paragraph for calculating the risk weighted exposure amount for that position provided the composition of the pool of exposuressecuritised is known at all times.(2) A firm may apply the weighted-average risk weight that would be applied to the securitised exposures referred to in (1) under the standardised approach by a firm holding the exposures multiplied by a concentration ratio.(3)
(1) This provision contains guidance on the requirement in BIPRU 9.11.6 R (1) that the composition of the pool of exposuressecuritised must be known at all times.(2) The composition should be known sufficiently at the time of purchase for the firm to be able accurately to calculate the risk weighted exposure amounts of the pool under the standardised approach.(3) Thereafter, any change to the composition of the pool during the life of the transaction that would lead to an increase
Subject to the availability of a more favourable treatment by virtue of the provisions concerning liquidity facilities in BIPRU 9.11.10 RBIPRU 9.11.12 R, a firm may apply to securitisation positions meeting the conditions set out in BIPRU 9.11.9 R a risk weight that is the greater of:(1) 100%, or(2) the highest of the risk weights that would be applied to any of the securitised exposures under the standardised approach by a firm holding the exposures.[Note:BCD Annex IX Part 4
When the conditions in this paragraph have been met, and in order to determine its exposure value, a conversion figure of 20% may be applied to the nominal amount of a liquidity facility with an original maturity of one year or less and a conversion figure of 50% may be applied to the nominal amount of a liquidity facility with an original maturity of more than one year. The risk weight to be applied is the highest risk weight that would be applied to any of the securitised exposures
To determine its exposure value, a conversion figure of 0% may be applied to the nominal amount of a liquidity facility that is unconditionally cancellable provided that the conditions set out at BIPRU 9.11.10 R are satisfied and that repayment of draws on the facility are senior to any other claims on the cash flows arising from the securitised exposures.[Note:BCD Annex IX Part 4 point 15]
Where a firm calculates the risk weighted exposure amount of a securitisation position under the standardised approach, where credit protection is obtained on a securitisation position, the calculation of risk weighted exposure amounts may be modified in accordance with BIPRU 5 (Credit risk mitigation).[Note:BCD Annex IX Part 4 point 34]